[jasonb]

That looks brill! A bit OOT, but are you happy with your K371 so far? Any glaring shortcoming?

I like the K371 a lot. It's been my most used headphone since I got it in November. It's a little bit dark for my taste, but a little EQ fixes that easily. They are comfortable, light, and sound great.

 

[fonkepala]

I like the K371 a lot. It's been my most used headphone since I got it in November. It's a little bit dark for my taste, but a little EQ fixes that easily. They are comfortable, light, and sound great.

Thanks for the input. It's a perfect pairing for the 5K then Enjoy!

 

[jasonb]

Thanks for the input. It's a perfect pairing for the 5K then Enjoy!

This is the minor EQ I'm doing. It all looks like small adjustments, but it does wonders for making these more detailed and lively.

 

[jasonb]

Does anybody know if Pixel 4a supports LDAC at 990?

I can confirm that with the 5K, the 4a scales all the way up to 990 without forcing it in the developer settings. Upon connection it starts at 492, then a couple seconds later goes up to 660, then a few seconds later gets to 990 and stays there. So it works and there is no screwing around with going into the developer settings.

Also LDAC seems to sound better on the 5K than on the es100.

 

[Lokiiami]

Does anyone know how to read this chart? Does it show how long more I can use the before next charge?

 

[TK33]

My understanding is that it is just historical usage. Shows battery level over time and how much battery you have left (percentage not time remaining).

 

[LostInDaSauce]

Does anyone know how to read this chart? Does it show how long more I can use the before next charge?

Based on your settings, if they didnt change, and don't change your usage works as follows:
92-74 = 18%/100mins
64%= 355 mins
Full charge 555 mins or 9.25 hours..

These are all approximate values obviously.

How much power you're using is based on normal/performance setting normal/high output power.

Hope this helps

 

[Nolbert0]

I can confirm that with the 5K, the 4a scales all the way up to 990 without forcing it in the developer settings. Upon connection it starts at 492, then a couple seconds later goes up to 660, then a few seconds later gets to 990 and stays there. So it works and there is no screwing around with going into the developer settings.

Also LDAC seems to sound better on the 5K than on the es100.

Thanks for the confirmation.This is the best news at the worst time. lol. That's one more to add to the shopping list.

 

[Lokiiami]

Based on your settings, if they didnt change, and don't change your usage works as follows:
92-74 = 18%/100mins
64%= 355 mins
Full charge 555 mins or 9.25 hours..

These are all approximate values obviously.

How much power you're using is based on normal/performance setting normal/high output power.

Hope this helps

Sorry how did you get 555mins from the chart?

 

[jsmiller58]

Does anyone know how to read this chart? Does it show how long more I can use the before next charge?

Looks like two different usage profiles (perhaps different IEMs, volume leves?). Your first two draw downs would indicate ~460 minutes (simply apply straight edge to the lines on the chart). The last draw down was much more gradual - 1/3 drain in 300 minutes, so ~900 minutes for full draw down.

 

[James_LX]

Is there a way to disable hearing the microphone feeding into the output? I keep hearing myself as well as ambient noises when I'm on zoom calls or phone calls.

 

[TK33]

Is there a way to disable hearing the microphone feeding into the output? I keep hearing myself as well as ambient noises when I'm on zoom calls or phone calls.

Sounds like you are referring to Side Tone. You can disable it in the app under Input --> Mic.

 

[James_LX]

Sounds like you are referring to Side Tone. You can disable it in the app under Input --> Mic.

Thank you! That's exactly it. For some reason I just discarded that option because "Side Tone" doesn't sound like it would be it.

Also, other times I would just see the big "ENABLE" option label and just assumed this was a switch to enable/disable the mic. The titles above the options use a rather faint grey colour so they're easily missed by the eye when rapidly going through the menus.

 

[TK33]

Thank you! That's exactly it. For some reason I just discarded that option because "Side Tone" doesn't sound like it would be it.

Also, other times I would just see the big "ENABLE" option label and just assumed this was a switch to enable/disable the mic. The titles above the options use a rather faint grey colour so they're easily missed by the eye when rapidly going through the menus.

Glad it worked. I believe all landlines used sidetone. Guess it ia not as relevant anymore with the use of video conferencing (not sure if cell phones do this either).

 

[Lokiiami]

Is there a way to disable hearing the microphone feeding into the output? I keep hearing myself as well as ambient noises when I'm on zoom calls or phone calls.

If it 5k has a side tone feature I wonder if it can add in ANC soon.