Shawn71
Headphoneus Supremus
- Joined
- Aug 18, 2013
- Posts
- 4,107
- Likes
- 239
Because if you plug your headphones into a line-out, which by default is at full power - instant ringing ears. Not recommended.
for a lot of reasons, line outs aren't some "better headphone out" that a clever audiophile thought to use while everybody else is an idiot. ^_^
- the line out is probably above 100ohm so plugging an IEM into it wouldn't be so great.
- the line out outputs 1.5V on the X1, when many IEMs are well above 100db loud with 1V. so you might damage your IEM and most likely your ears.
- the line out bypasses a bunch of stuff because it expects to be plugged into several thousands of ohm(all amplifier inputs are in that range) so that current will never be a concern and only voltage precision matters. it isn't the case with an IEM so in most situations the signal will actually go bad because the DAP may not be able to provide enough current for the headphone.
and that's why some outputs are headphone out, and some are line out. and while most(but not all) headphone outs may be very fine plugged into an amp, a line out plugged into a headphone will almost never be fine as far as signal fidelity is concerned.
Hmm ok.....been using LOD cable for my classics,touch and iPhone 3G....And never tried connecting HPs either thru LO of 601LE....