gankmeplz
New Head-Fier
- Joined
- Sep 8, 2013
- Posts
- 1
- Likes
- 0
I have bought a ODAC and O2 combo in my country China.
But the manufacturer use Tenor 7022L instead of 7022 because 7022 is sold out.
That is where the problem come from
when I
cat /proc/asound/card1/stream0
I get these info
Tenor Electronics DigiHug USB Audio at usb-0000:00:1a.0-1.1, full speed : USB Audio
Playback:
Status: Stop
Interface 3
Altset 1
Format: S16_LE
Channels: 2
Endpoint: 3 OUT (ADAPTIVE)
Rates: 44100, 48000
Interface 3
Altset 2
Format: S24_3LE
Channels: 2
Endpoint: 3 OUT (ADAPTIVE)
Rates: 44100, 48000
Capture:
Status: Stop
Interface 2
Altset 1
Format: S16_LE
Channels: 2
Endpoint: 2 IN (ADAPTIVE)
Rates: 44100, 48000
This shows the ODAC only support up to 48/24, so I googled and got this
http://www.hydrogenaudio.org/forums/index.php?showtopic=99982
The main information in the post is:
"Due to 12Mbps bandwidth limitation of the USB full speed operation, only one I2S input or output can be set for 24bit/96KHz application, under this condition, for simultaneous multiple-channel applications, rest of I2S interfaces has to be configured at the combination of 16-bit / 48KHz, 16-bit/96KHz and even lower resolution/sampling rate. In the application of USB internet telephony, lower resolution and sampling rate are needed."
"For audio interfaces ( input and output or D to A and A to digital, like in recording interfaces) USB full speed have limitations :
- 2 Inputs and 0 Outputs at 24Bit / 96kHz
- 0 Inputs and 2 Outputs at 24Bit / 96kHz
- 4 Inputs and 2 Outputs at 24Bit / 44.1 or 48kHz
- 2 Inputs and 4 Outputs at 24Bit / 44.1 or 48kHz
- 4 Inputs and 4 Outputs at 16Bit / 44.1 or 48kHz
- 2 Inputs and 8 Outputs at 16Bit / 44.1 or 48kHz (Sonica Theater)
- 4 Inputs and 4 Outputs with every other sample rate up to 16Bit/44.1kHz."
"THe problem is, since os x 10.6, some audio DAC, though only having output capacity (d to a), are wrongly recognized as having both input and output. That's why I see both in and out in "audio midi settings"!!
But, I have connect my ODAC to mac(OS X10.8), linux (ubuntu 12.04), win7, and they display the same information:
1. ODAC only supports up to 48/24
2. System recognizes the ODAC as a input (unavailable) and a output
So I think maybe it's not a problem of OS but the problem of the chip 7022L itself
What is your guy's opinion?
If u have the device, can u try it doing a experiment and post your result?
Thanks in advance.
But the manufacturer use Tenor 7022L instead of 7022 because 7022 is sold out.
That is where the problem come from
when I
cat /proc/asound/card1/stream0
I get these info
Tenor Electronics DigiHug USB Audio at usb-0000:00:1a.0-1.1, full speed : USB Audio
Playback:
Status: Stop
Interface 3
Altset 1
Format: S16_LE
Channels: 2
Endpoint: 3 OUT (ADAPTIVE)
Rates: 44100, 48000
Interface 3
Altset 2
Format: S24_3LE
Channels: 2
Endpoint: 3 OUT (ADAPTIVE)
Rates: 44100, 48000
Capture:
Status: Stop
Interface 2
Altset 1
Format: S16_LE
Channels: 2
Endpoint: 2 IN (ADAPTIVE)
Rates: 44100, 48000
This shows the ODAC only support up to 48/24, so I googled and got this
http://www.hydrogenaudio.org/forums/index.php?showtopic=99982
The main information in the post is:
"Due to 12Mbps bandwidth limitation of the USB full speed operation, only one I2S input or output can be set for 24bit/96KHz application, under this condition, for simultaneous multiple-channel applications, rest of I2S interfaces has to be configured at the combination of 16-bit / 48KHz, 16-bit/96KHz and even lower resolution/sampling rate. In the application of USB internet telephony, lower resolution and sampling rate are needed."
"For audio interfaces ( input and output or D to A and A to digital, like in recording interfaces) USB full speed have limitations :
- 2 Inputs and 0 Outputs at 24Bit / 96kHz
- 0 Inputs and 2 Outputs at 24Bit / 96kHz
- 4 Inputs and 2 Outputs at 24Bit / 44.1 or 48kHz
- 2 Inputs and 4 Outputs at 24Bit / 44.1 or 48kHz
- 4 Inputs and 4 Outputs at 16Bit / 44.1 or 48kHz
- 2 Inputs and 8 Outputs at 16Bit / 44.1 or 48kHz (Sonica Theater)
- 4 Inputs and 4 Outputs with every other sample rate up to 16Bit/44.1kHz."
"THe problem is, since os x 10.6, some audio DAC, though only having output capacity (d to a), are wrongly recognized as having both input and output. That's why I see both in and out in "audio midi settings"!!
But, I have connect my ODAC to mac(OS X10.8), linux (ubuntu 12.04), win7, and they display the same information:
1. ODAC only supports up to 48/24
2. System recognizes the ODAC as a input (unavailable) and a output
So I think maybe it's not a problem of OS but the problem of the chip 7022L itself
What is your guy's opinion?
If u have the device, can u try it doing a experiment and post your result?
Thanks in advance.