rds
Headphoneus Supremus
- Joined
- May 4, 2008
- Posts
- 2,045
- Likes
- 31
It looks like the guide still needs some work. I don't think C8-c12 are mentioned either. You need to refer to the schematic directly at this point.
Originally Posted by rds /img/forum/go_quote.gif I guess I'm missing something here, but when the r3 and r4 values in the schematic set the lm317 output to ~10V how are you supposed to get above 10v output? The build guide recommends not changing r3 and r4. I'm trying to get 30V output and my r10 and r11 values are 3.32k and 1k respectively. As I would have expected I get about 7.7V regulated since the 317 is putting out 10v. Should I just ignore the instructions not to change r3 and r4? EDIT it seems having about 2.5k on r4 would fix things. Does that sound right? |
Originally Posted by rds /img/forum/go_quote.gif Thanks error401, I went back I figured this out. Now it seems the issue is that I need to jumper rsvj and rsv as well as rscg and rsrg. Sound right? |
Originally Posted by error401 /img/forum/go_quote.gif Note: I'm going by the schematic here, I don't have one of these particular boards/designs built up. |