[hakushondaimao]

  I've just discovered (for myself) that the included Comply tips are crucial for the 350s. Have any of the reviewers tried the 350 with foam tips by any chance? 
 
It was a night and day difference for me..

With the 350 and 150, I experienced driver flex with silicon tips. With Comply tips, no problem... so that's another advantage of the foamies! 

 

[d marc0]

Review for the Altone 350 is up:
http://www.head-fi.org/products/t-peos-altone-350-hybrid-3-driver-iem/reviews/13312

 

[prostheticwhim]

Does anybody know a place to buy DC jacks for altone 350 with international shipping? I want to make my own cable, red cable is better than the cable with mic but I really dont like to use a red cable and I want to add memory wire.

 

[d marc0]

Does anybody know a place to buy DC jacks for altone 350 with international shipping? I want to make my own cable, red cable is better than the cable with mic but I really dont like to use a red cable and I want to add memory wire.

I don't know about the jacks but this eBay seller has custom cables for t-peos. Maybe you can ask him to sell you some.
http://pages.ebay.com/link/?nav=item.view&id=261344838374&alt=web

 

[nmatheis]

Hey guys. Try them on high gain with foamies if you've got them to tighten up the bass and tame the treble a bit.

Hisoundfi said it worked well with the A350.

hakushondaimao confirmed for A350 and said it helped the A250, as well (but not as much as A350).

 

[Brooko]

Hey guys. Try them on high gain with foamies if you've got them to tighten up the bass and tame the treble a bit.

@Hisoundfi said it worked well with the A350.

@hakushondaimao confirmed for A350 and said it helped the A250, as well (but not as much as A350).

 
@Hisoundfi - mentioned trying them with a higher impedance source (to change the frequency response), and switching to high gain
@hakushondaimao - talked about doing the same on his Fiio X3ii - which is only 0.26 ohm.  Raising the gain raises the volume by 5.9 dB - nothing else.  I checked.  I doubt he volume matched when he did comparisons.  They sounded the same to me when matched to within 0.1 dB with my SPL meter.
 
Perosnally - I don't think switching gain (as long as it is linear) is going to change anyhting.  Impedance might though.

 

[nmatheis]

Thanks for chiming in Brooko. It's an easy test for anyone who's interested...

 

[Brooko]

Thanks for chiming in @Brooko. It's an easy test for anyone who's interested...

 
Agree.  Did you get the chance to try yourself (curious)?  I'll suggest to the others remaining in the Australaian informal tour to have a crack at it and see if it changes anything.  If I had my LP5, I'd try what Vince did - but sadly it won't be back before I have to move these on.

 

[nmatheis]

Nope, the pair I had are out on tour. Carlsan's got them now. Originalsnuffy will have them soon. Then off to Hisoundfi before making their way back to me in a few weeks. I'll give it a try then.

 

[Brooko]

My review posted - I'll get them off to Vic tomorrow.
 
http://www.head-fi.org/products/t-peos-altone-350-hybrid-3-driver-iem/reviews/13445

 

[H20Fidelity]

My review posted - I'll get them off to Vic tomorrow.

http://www.head-fi.org/products/t-peos-altone-350-hybrid-3-driver-iem/reviews/13445

Bit too bassy, bit over priced.

An accurate 6 world description?

 

[Brooko]

Shoot - I should hire you. Slap a couple of pics with those six words and it would've saved me quite a few hours of work

 

[H20Fidelity]

Shoot - I should hire you. Slap a couple of pics with those six words and it would've saved me quite a few hours of work

 
I dun good. 
 

 

[Hapster]

Bit too bassy, bit over priced.

An accurate 6 word description?

At what price point are you referring to?

 

[Brooko]

CTCs price is $379

With their current short comings , I'd put a more realistic price in the $200-250 bracket