In the spirit of continuous development and evolution, DITA introduces its first resin-based, hybrid earphone, Project M.
The M’s physical appearance is a departure from previous DITA designs, taking on an even more ergonomic form factor at once familiar yet uniquely DITA.
Project M consists of DITA’s all-new PM1+ Dynamic Driver and a balanced armature driver.
As with all of DITA’s pieces, the Project M aims to be something that can be kept and enjoyed for a long time: It will be backed by self-mandated 10-year parts or replacement availability that speaks to DITA’s commitment to stability, long-term viability and re-sale value.
Product Highlight
The M’s physical appearance is a departure from previous DITA designs, taking on an even more ergonomic form factor at once familiar yet uniquely DITA.
Project M consists of DITA’s all-new PM1+ Dynamic Driver and a balanced armature driver.
As with all of DITA’s pieces, the Project M aims to be something that can be kept and enjoyed for a long time: It will be backed by self-mandated 10-year parts or replacement availability that speaks to DITA’s commitment to stability, long-term viability and re-sale value.
Product Highlight
- 1 Dynamic Driver + 4 Balanced Armature + 4 Electrostatic Drivers
- 904L Stainless Steel + DLC Coating
- Full Organic Complex Cavity
- Dual 4-Way Frequency Control With Crossover Design
- Precision-Tuned Dynamic Driver Unit Tailored For Low-Frequency Artistry
- Customized Balanced Armature Units For Mid-High Frequencies
- Electrostatic Unit Elevating The Sense Of Openness And Ambiance In The Audio
- Brand New Exclusive Flagship Cable| Q-LOCK PLUS Quick-Switch Modular Plug System
- NET WEIGHT: 17.5 g (Per Side)
- FREQUENCY RESPONSE: 5 Hz - 40 kHz
- IMPEDANCE: 43 Ω at 1 kHz
- SENSITIVITY: 109 dB/mW (@1kHz), 122 dB/Vrms (at 1 kHz)
- THD: <0.5% at 1 kHz
An Upgraded TSURANAGI with Full Silver Inner Wires
Inputs and Outputs:- Input connector: 3-pole 3.5mm single-end; 5-pole 4.4mm balanced; Maximum 6Vrms/3.5Vrms (v.s. OG TSU: 6Vrms/1.8Vrms)
- Output connector: 3-pole 3.5mm single-end; 5-pole 4.4mm balanced
- Battery: Built-in rechargeable battery with a capacity of 7.4V 2800mAh.
- Charging: USB Type-C connector with a 5V 2A AC adapter, takes less than 5 hours to fully charge.
- Voltage gain: Up to 4.5 dB, more friendly to IEMs. (v.s. 10db in OG TSU)
- Frequency response: 2 Hz to 200 kHz.
- Output power: 1000 mW of power per channel at 32 ohms impedance with less than 0.01% distortion.
- Total harmonic distortion (THD+N): <0.004% at BW=20kHZ, 1Vrms, with 16ohm loaded. <0.001% at BW=20kHz, 1Vrms, with 300ohm loaded. <0.0007% at BW=20kHz, 2.3Vrms, no loaded. (OG TSU: <0.005% at BW=20kHZ, 1Vrms, with 16ohm loaded. <0.002% at BW=20kHz, 1Vrms, with 300ohm loaded.)
- Crosstalk: less than -100 dB.
- Full Silver Inner Wires
- Weight: 360 grams
- Dimensions: 80 x 30 x 120 mm (excluding protruding parts).
