SONY NW-WM1Z / WM1A
Status
Not open for further replies.
Mar 29, 2018 at 2:08 AM Post #19,306 of 45,723
Mar 29, 2018 at 9:26 AM Post #19,309 of 45,723
I've had the wrist strap save me a couple of times from dropping my 1Z. It's a keeper in my opinion.

A second microSD slot would be nice but with 400GB cards available and 512GB cards soon it's not as critical as it used to be.
 
Mar 29, 2018 at 12:19 PM Post #19,311 of 45,723
My remote doesn’t pair. I read somewhere that there are differences between Asia/Japan remotes and N. American remotes in terms of inability to sync. Is this true? If so, is there a work around? If not, do I simply turn on blue tooth sync and add device? Thanks for your help!
 
Mar 29, 2018 at 1:31 PM Post #19,312 of 45,723
My remote doesn’t pair. I read somewhere that there are differences between Asia/Japan remotes and N. American remotes in terms of inability to sync. Is this true? If so, is there a work around? If not, do I simply turn on blue tooth sync and add device? Thanks for your help!
To my understanding, this remote doesn't have a North-American version. It's just the one: the Asia/Japan version.
I would try to reboot your player. And if that doesn't work, you could try if your player's bluetooth works with other devices: if yes, your remote is faulty and you should get a refund.
Best of luck
 
Mar 29, 2018 at 1:33 PM Post #19,313 of 45,723
My remote doesn’t pair. I read somewhere that there are differences between Asia/Japan remotes and N. American remotes in terms of inability to sync. Is this true? If so, is there a work around? If not, do I simply turn on blue tooth sync and add device? Thanks for your help!
In addition to that: if your remote doesn't light up (shows a blue or red light in the middle of the control pad), you might have the same issue I had. Then another battery might resolve it
 
Mar 29, 2018 at 1:54 PM Post #19,314 of 45,723
My remote doesn’t pair. I read somewhere that there are differences between Asia/Japan remotes and N. American remotes in terms of inability to sync. Is this true? If so, is there a work around? If not, do I simply turn on blue tooth sync and add device? Thanks for your help!

like someone else said,,,you can only get the remotes from the asian market, there's a separate BT sync for the remote (in the settings) that has nothing to do with the main BT..and yes...for the first sync, that blue light on the remote should be blinking
 
Mar 29, 2018 at 1:59 PM Post #19,315 of 45,723
Brimar cables at Can Jam :L3000:
20180324_170405.jpg 20180324_172010.jpg 20180324_172018_HDR.jpg 20180324_173020.jpg
 
Mar 29, 2018 at 3:05 PM Post #19,319 of 45,723
Can a bad cable cause channel imbalance ? Out of the balanced output of my WM1A, the voices are not centered but on the right, and when I try the SE output (not the same cable) the problem is fixed.

I'm waiting for another 4.4 balanced to see if it's coming from the output itself or the cable.
 
Mar 29, 2018 at 3:07 PM Post #19,320 of 45,723
Got a couple of Nobunaga 4.4mm female connector.
Really nice quality, much more compact that the pentaconn one, I just wished the soldering pins were slightly bigger, especially for someone like me that doesn't really master the soldering art.






Where did you buy that Nobunaga 4.4mm female connector?

Here is my 2.5mm to 4.4mm Nobunaga adapter. It is more compact than iBasso converter.
1522350381576979464584.jpg
 
Status
Not open for further replies.

Users who are viewing this thread

Back
Top