You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Sony MDR-10R Impressions Thread
- Thread starter squallkiercosa
- Start date
angel24
New Head-Fier
- Joined
- Jan 19, 2014
- Posts
- 17
- Likes
- 21
my mdr-10r cost me 103 dollars here in Panama, I found it an excellent sound quality price is very good is very clear treble exelentes also means the bass is good but not heavy I would say you need a little more low , but I still really like their sound is very spacious and nice, I also have the mdr-v55 and notice the difference in changing the mdr-mdr 10r but clear-v55 is much lower.
I also buy the mdr-10RC and xba-h1 or h3 if I can.
recommend the mdr-10r
I also buy the mdr-10RC and xba-h1 or h3 if I can.
recommend the mdr-10r
squallkiercosa
Headphoneus Supremus
- Joined
- Apr 8, 2012
- Posts
- 2,164
- Likes
- 169
Which Grados?
Any model basically
vantt1
Headphoneus Supremus
Any model basically
Well, if they're equal to or less than 18 cm wide, 20 cm long and less than 6 cm in depth when folded, they should fit.
a_recording
Member of the Trade: Lachlanlikesathing
- Joined
- Mar 20, 2009
- Posts
- 4,705
- Likes
- 793
I just got a pair of these, wanted to post some first impressions.
Please note, I received the MDR-10R as a review unit from Sony Australia to keep.
I don't have the MDR-1R on hand to directly compare to, but it seems that the 10R is definitely more bassy than it's bigger brother. Depending on your preferences this may be a good thing - some people, myself included, find the MDR-1R a bit bass light in the very lowest frequencies. It lacks the spaciousness of the MDR-1R, which should be expected given the smaller size of the earcups. It's also a fairly laid back, relaxed and musical kind of listen.
The high frequencies are a bit rolled off, so there is a sense of stuffiness or congestion. There is a particular weird dip around the vocals that makes them sound a bit distant / hollow and makes me think I have a head cold.
Build is nice and lightweight with good use of quality plastics, but there are a few rough edges here and there and the whole thing feels a bit insubstantial. (Personally, I think this is okay given the low weight). It's very very comfortable, and it seems in this respect Sony has nailed the ergonomics.
Of course, I'll need some more time to do some direct comparisons against other headphones in this price point, but my thinking is that the 10R hits it out of the park design wise but the sound is a bit weird.
Please note, I received the MDR-10R as a review unit from Sony Australia to keep.
I don't have the MDR-1R on hand to directly compare to, but it seems that the 10R is definitely more bassy than it's bigger brother. Depending on your preferences this may be a good thing - some people, myself included, find the MDR-1R a bit bass light in the very lowest frequencies. It lacks the spaciousness of the MDR-1R, which should be expected given the smaller size of the earcups. It's also a fairly laid back, relaxed and musical kind of listen.
The high frequencies are a bit rolled off, so there is a sense of stuffiness or congestion. There is a particular weird dip around the vocals that makes them sound a bit distant / hollow and makes me think I have a head cold.
Build is nice and lightweight with good use of quality plastics, but there are a few rough edges here and there and the whole thing feels a bit insubstantial. (Personally, I think this is okay given the low weight). It's very very comfortable, and it seems in this respect Sony has nailed the ergonomics.
Of course, I'll need some more time to do some direct comparisons against other headphones in this price point, but my thinking is that the 10R hits it out of the park design wise but the sound is a bit weird.
VeeDub
New Head-Fier
- Joined
- Jan 26, 2014
- Posts
- 2
- Likes
- 0
Hey vantt1: Are those the Sony MDR-10R headphones in the carrying case? I just purchased those headphones (online purchase so I am waiting for them to arrive) but I wanted to purchase a carrying case for them too and that case looks to be the perfect fit.
vantt1
Headphoneus Supremus
Hey vantt1: Are those the Sony MDR-10R headphones in the carrying case? I just purchased those headphones (online purchase so I am waiting for them to arrive) but I wanted to purchase a carrying case for them too and that case looks to be the perfect fit.
Yes, the case I bought was a perfect fit, surprisingly.
VeeDub
New Head-Fier
- Joined
- Jan 26, 2014
- Posts
- 2
- Likes
- 0
Yes, the case I bought was a perfect fit, surprisingly.
That is really good to hear b/c I just ordered the case as well. Thanks for the link.
yliu
500+ Head-Fier
- Joined
- Feb 23, 2010
- Posts
- 689
- Likes
- 23
1r over the 10r:
Larger, sturdier build
Spacious sound
Sound has clearer and well defined mids and highs
Flatter response overall
Headphone jack is not "proprietary", can use many other cables
Silent silicone-lubricated hinges
The MDR-10R has proprietary cables? I thought they use 3.5mm jack at both ends.
vantt1
Headphoneus Supremus
The MDR-10R has proprietary cables? I thought they use 3.5mm jack at both ends.
Yes it does, but in a way the 3.5 mm connector on the headphone end is proprietary. The diameter of the plastic sheath immediately to the left (in the picture) of the connector itself is smaller on the headphone end than it is on the device end. The device end is colored light gray and too thick to fit into the headphone, because the jack is recessed behind a hole that only accommodates for the correct end of the cable. This is to prevent users from accidentally connecting the device end of the cable to the headphone, which makes an awkward connection at the headphone, and in the case of the inline remote cable, the inline remote will end up close to the device end.
I think this is a bad design because replacement cables will be near impossible to find and it won't be possible to use cables from Beats headphones that have inline volume controls for iPods and iPhones.
yliu
500+ Head-Fier
- Joined
- Feb 23, 2010
- Posts
- 689
- Likes
- 23
Yes it does, but in a way the 3.5 mm connector on the headphone end is proprietary. The diameter of the plastic sheath immediately to the left (in the picture) of the connector itself is smaller on the headphone end than it is on the device end. The device end is colored light gray and too thick to fit into the headphone, because the jack is recessed behind a hole that only accommodates for the correct end of the cable. This is to prevent users from accidentally connecting the device end of the cable to the headphone, which makes an awkward connection at the headphone, and in the case of the inline remote cable, the inline remote will end up close to the device end.
I think this is a bad design because replacement cables will be near impossible to find and it won't be possible to use cables from Beats headphones that have inline volume controls for iPods and iPhones.
I see...
I was considering the MDR-10R as it had replaceable cables. (I always damage my headphone cables)
vantt1
Headphoneus Supremus
I see...
I was considering the MDR-10R as it had replaceable cables. (I always damage my headphone cables)
It kinda sucks, so I'm going to try and mod the headphone jack so it is flush with the headphone, allowing me to use any cable I want.
dirtherder
New Head-Fier
- Joined
- Sep 29, 2013
- Posts
- 6
- Likes
- 0
Yes it does, but in a way the 3.5 mm connector on the headphone end is proprietary. The diameter of the plastic sheath immediately to the left (in the picture) of the connector itself is smaller on the headphone end than it is on the device end. The device end is colored light gray and too thick to fit into the headphone, because the jack is recessed behind a hole that only accommodates for the correct end of the cable. This is to prevent users from accidentally connecting the device end of the cable to the headphone, which makes an awkward connection at the headphone, and in the case of the inline remote cable, the inline remote will end up close to the device end.
I think this is a bad design because replacement cables will be near impossible to find and it won't be possible to use cables from Beats headphones that have inline volume controls for iPods and iPhones.
I see...
I was considering the MDR-10R as it had replaceable cables. (I always damage my headphone cables)
On my 10RBT, I can plug the included cable L side towards source or L side towards headphones and it seems to be working fine.
dirtherder
New Head-Fier
- Joined
- Sep 29, 2013
- Posts
- 6
- Likes
- 0
Here is a pic of the 10RBT with the headphone cable plugged in "the wrong way".
It seems like the port design may be slightly different from the other 10Rs.
It seems like the port design may be slightly different from the other 10Rs.
Trunks159
Headphoneus Supremus
- Joined
- Aug 2, 2012
- Posts
- 3,340
- Likes
- 186
10R is $100 at Amazon right now.
Users who are viewing this thread
Total: 2 (members: 0, guests: 2)