thats not the case, the pin layout is different and hence needs to be changed.Just to be clear, Denafrips ddc works with Sonnet i2s input without buying a specially configured rj45 cable?
SIngxer SU-6 apart from Hermes and Ambre work out of box
thats not the case, the pin layout is different and hence needs to be changed.Just to be clear, Denafrips ddc works with Sonnet i2s input without buying a specially configured rj45 cable?
SU-6 gives better SQ?thats not the case, the pin layout is different and hence needs to be changed.
SIngxer SU-6 apart from Hermes and Ambre work out of box
I have never tried SU-6 but one benefit of using SU-6 over Amber and Hermes is the ability to pass 384Khz via I2S but again later 2 are streamers and SU-6 is DDC.SU-6 gives better SQ?
If it's anything like the Adagio, there are at least 4 fuses inside.Has anyone ever swapped the fuse in the Pasithea? If so, what are the specs on the fuse. I would like to try the Synergistic Research Purple fuse on the Pasithea, but I am wondering what the right. specs of the fuae should be. Many thanks in advance.
Pastihea has 2 fuses. One each for voltageHas anyone ever swapped the fuse in the Pasithea? If so, what are the specs on the fuse. I would like to try the Synergistic Research Purple fuse on the Pasithea, but I am wondering what the right. specs of the fuae should be. Many thanks in advance.
Great! Thanks a lot!Pastihea has 2 fuses. One each for voltage
1 for 110V
1 for 230V
So it's enough that you only replace one for your voltage
315 mA slow blow for 230 V
630 mA slow blow for 110 V
Do Sonnet and Metrum use the same DAC modules? SDA-2/SDA-3 in Sonnet vs. DAC2/DAC3 for Metrum? Assuming they both are using the "2" vs the newer"3" of their respective modules, what does the Morpheus give you that the Metrum Onyx does not?