nish1
New Head-Fier
- Joined
- May 30, 2016
- Posts
- 9
- Likes
- 16
Ah - in that case I wish you best of luck finding a repairer. Mine were out of action for just 10 days and when I got them back I was blown away again by the sound! Let us know how it goes!
Mega annoying!Just found this thread. Same issue. Shure won't repair. Anyone know a good repair shop in the US?
Just found this thread. Same issue. Shure won't repair. Anyone know a good repair shop in the US?
actuallyMega annoying!
Google ‘headphone repair’. I think hopefully you should find someone who can do it. I don’t have any recommendations though unfortunately as I live in UK. But googling that is how I found the company that does it in the UK.
Alternatively contact https://uk.electronic.partners/ who fixed mine and see if either they can do international repairs or if they recommend someone in the US.
They have fixed mine twice now. The second time the casing fell apart and they even managed to fix that.
Mega annoying!
Google ‘headphone repair’. I think hopefully you should find someone who can do it. I don’t have any recommendations though unfortunately as I live in UK. But googling that is how I found the company that does it in the UK.
Alternatively contact https://uk.electronic.partners/ who fixed mine and see if either they can do international repairs or if they recommend someone in the US.
They have fixed mine twice now. The second time the casing fell apart and they even managed to fix that.
They fixed mine for £50Actually looks like Electronic Partners might have expanded to the US.
https://uk.electronic.partners/serv...mmcx-conector-repair-in-sylmar-united-states/
Let me know how you get on. Hope they can sort it for you!
Just found this thread. Same issue. Shure won't repair. Anyone know a good repair shop in the US?
As mentioned, the connectors have been thoroughly cleaned and some contact restorer (Stabilant 22 - similar to DeOxit) applied. Alas the issue with dropouts on the left earphone continue. It's definitely a connection issue, which the MMCX connectors are known for.
Again, I tried my cables on my older SE215 IEMs and neither cable would reproduce the left earphone dropouts. I'm fairly certain that it's the MMCX socket in the left earphone so I have put some feelers out in some audiophile Canadian forums/Facebook groups so hopefully someone will provide a reliable repair shop.
As mentioned in my original post, I've repaired electronics for over 35+ years (medical device repair) so I'm fairly confident that the problem is the MMCX connector itself. It definitely frustrates me that I have (had) the skills to do the repair but with my failing health, now I'm too shaky to do fine detail work. Hopefully I'll find a decent Canadian repair shop as I'm reluctant to send these outside the country.
I ended up buying the parts to do it myself. Alas, though I've done electronics repairs at the component level for almost 50 years, my health has thrown me a curve-ball in that I'm too shaky to do fine work. I have a good magnifier and even a microscope sending the image to a 46" monitor so it's not visual, just my hands being too shaky. My roommate has offered to try at some point - his electronics skills aren't perfect but he's getting there.
I did try to find a repairer locally, even went to one of the high-end earbud manufacturers that's based in my city, but they declined saying they only work on their products. I bought a 2nd set of SE846 (used) from another Head-fi member but now even they have a minor issue - the left earbud shell has cracked. The shell separates very easily so it needs to be replaced.
I still prefer the soundstage and low-end from the SE846 over anything else that I've tried so I'll eventually get them both repaired.
Alas I haven't found anyone to repair them in Canada. I still use my SE846 - now using the right earbud from my original pair and the left earbud from the 2nd pair I bought used from a Head-fi member. I ended up using cyanoacrylate to 'repair' the left one, i.e. to prevent the shell from separating. So far the MMCX connectors are holding up to my use.Oh, just read this
For ~1k$ earbuds they sure suck imo, both in terms of value for money, and other factors like warranty, repair/support. Prob the last time I ever buy Shure and I have had 2 pairs of 215s, a 535 and now this 846.
I'm 8 years on with my SE846's and no trouble with mmcx on these or any of my others too.Just following up on this that the connector was repaired successfully! Now go figure I hear my other connector starting to behave the same way lol. Mmcx is the worst.....
Alas I haven't found anyone to repair them in Canada. I still use my SE846 - now using the right earbud from my original pair and the left earbud from the 2nd pair I bought used from a Head-fi member. I ended up using cyanoacrylate to 'repair' the left one, i.e. to prevent the shell from separating. So far the MMCX connectors are holding up to my use.
It's sad that Shure doesn't offer a true repair service. I'm hoping to mill an all-metal shell for the SE846, seeing as they now use a half-metal shell in the new 2nd gen SE846. My shell will be easily disassembled so that the MMCX connectors can be replaced. Alas it's likely to take at least 4 - 6 months before I'll have the time to do anything about it.
In the interim I've also looked at alternate IEMs. I had purchased a pair of Fiio FH7 and they are decent, but I still prefer the SE846 signature. I also just recently went all-in on a new pair of Sony IER-M9. The Sony's are VERY close to the SE846 in sound, at least to me. They have been harder to fit properly and I'm still trying different tips to see which I prefer.