[Dany Vaknin]

I am not using the integrated preamp in my reciever.
I already use schiit mani phono preamp.

 

[clowkoy]

I just got a Saga last week. Is it normal to still hear
music with the potentiometer turned fully counterclockwise?
Thanks.

 

[Mike Thompson]

I just got a Saga last week. Is it normal to still hear
music with the potentiometer turned fully counterclockwise?
Thanks.

Yes it is. You'll still hear it although quite faintly. Freya is the same. Also when you hit mute you'll still hear just a bit. For me it's no big deal.

 

[clowkoy]

Yes it is. You'll still hear it although quite faintly. Freya is the same. Also when you hit mute you'll still hear just a bit. For me it's no big deal.

Thank you Mike!

 

[chris.egeskov]

Interesting, could be fun to hear with my Modi Multibit

 

[Vas19]

Just need to reiterate how good a value this thing is. Incredibly transparent in passive mode, and just the right amount of bloom in tube mode. Unless you need more gain or balanced outs there is no need to look at anything else.

 

[beercanchicken]

I’ve been looking hard at this for awhile, solves some of my current setups missing features. I dropped the ball a couple of weeks ago when they some black ones in stock. Only thing that’s been holding me back is lack of headphone out. Not a huge deal but I have no headphone jack on my tv which I don’t run through main system, so simple jack would have been nice. Doesn’t have to be super powerful or anything, just a point of entry.

 

[liquidsmote]

The replacement remote for the Saga / Freya is magnetic!!!

 

[liquidsmote]

Note:

If you stack a Mimby and Mani next to your Saga ... you can use a Pyst cable for one of the devices, but will need a slightly longer IC for the other device.

I have the Pyst running from the Mani to Input 1 of the Saga
I had to get a 1' BJC to run from the ModiMB to Input 5 of the Saga.

 

[limelake]

Note:

If you stack a Mimby and Mani next to your Saga ... you can use a Pyst cable for one of the devices, but will need a slightly longer IC for the other device.

I have the Pyst running from the Mani to Input 1 of the Saga
I had to get a 1' BJC to run from the ModiMB to Input 5 of the Saga.

Very Sexy SETUP ! Bet it sounds amazing !

 

[MWSVette]

Schiit Stack including my new Saga addition. So far I really like this little preamp.

I will post impressions after some more critical listening...

 

[nilov]

Hi all.
Just received Saga yesterday,and have questions.
1.With my Pioner Pl 990 Saga drives on 4-5 clock volume knob for medium loud sound,its normal?
2.And on the tube,only one light burns (see pc),its also normal?
Thanks in advance

 

[MWSVette]

I leave the knob on my Saga about 1:00. When I power the Saga on it starts at that volume. I then use the remote to adjust the volume level to suit.

Both triodes glow on mine.

 

[JohnBal]

Hi all.
Just received Saga yesterday,and have questions.
1.With my Pioner Pl 990 Saga drives on 4-5 clock volume knob for medium loud sound,its normal?
2.And on the tube,only one light burns (see pc),its also normal?
Thanks in advance

You may want to try unplugging the tube and reinserting it. There may be a bad contact. Good luck.

 

[nilov]

Im very dissapointed.
Volume knob just came off now!