Yes, digital output with SPDIF (rca) works well, understand the output is switchable via front panel or remote, and not simultaneously. Schiit sells a PYSST USB cable, that I bought, but it is not for the purpose of digital output from Urd to the BF264. I asked the Schiittalker about it, went round and round, and the issue was resolved by suggesting I listen thru SPDIF and to forget the Unison USB hoohaa.
Urd qurik: digital output is either spdif or USB (selectable via front panel or remote), but not both simultaneously. It should be capable of working with BF2 via USB
Seeking some advice please. Looking to get a preamp for second setup. Want to run in active mode but be as neutral and transparent as possible. Wondering what difference I might experience in sound between a Saga in JFET. Saga+ with stock tube and Saga + with Lisst. Thanks all.
Been listening to my new Yggy GS+2, great googly moogly! It’s everything people have already stated for years, the bottom end, the sound stage, the detail and really just the raw umph up and down the spectrum. It’s doing for my two channel system what the Mjolnir 3 did for my headphones and now that system gets the Gumby and the Vali+ gets the Modi MB. What really hit me is Yggy has got me seriously considering phasing out the vinyl. It seems to be giving me everything that I want from vinyl but it’s still early days. So, Yggdrasil OG is really good in case you hadn’t heard.
Urd qurik: digital output is either spdif or USB (selectable via front panel or remote), but not both simultaneously. It should be capable of working with BF2 via USB
Yes, digital output with SPDIF (rca) works well, understand the output is switchable via front panel or remote, and not simultaneously. Schiit sells a PYSST USB cable, that I bought, but it is not for the purpose of digital output from Urd to the BF264. I asked the Schiittalker about it, went round and round, and the issue was resolved by suggesting I listen thru SPDIF and to forget the Unison USB hoohaa.
What? I’m using a C to B cable from somebody (cable matters?, monoprice?) but it works a treat with Urd and Schiit DACs (B2 and Yggy GS2). The Schiit cable is just a male A to Male B, so it won’t work with Urd’s C connectors anyway.
Commercial pilots and air traffic controllers: I saw a news story about a near miss at an airport. Passenger liner was taking off, a cargo plane was following the passenger jet down the runway trying to land. Eventually the cargo plane pulled off and circled around again, so no crash. According to the news story, poor visibility (not evident in the video) was blamed for the near miss. Seems like a garbage explanation to me: even if it had been cloudy/ foggy, aren't instruments enough to keep that from happening if people are paying attention?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.