tgeml
New Head-Fier
- Joined
- Jul 18, 2009
- Posts
- 40
- Likes
- 11
I tryed searching the forums, but couldn't find a good answer to my question. I'm building a DIY cable for my HD-580's with some Canare quad conductor cable, Neutrix 1/4" Jack, Cardas HD580 earcup connectors.
I wanted to ask the guru's here how they deal with connecting the braided shielding to the connector(Diagram shows how I have it setup). Additionally I wanted to make sure that wiring this way is acceptable, and will work!
Thanks in advance for any help, I apologize for the ghetto diagram, its the best i could draw up!
Materials
1) Canare L-4E5C Cable (8ft)
2) Neutrix NP3X Stereo Phone Plug
3) Cardas Senn Connectors.
I wanted to ask the guru's here how they deal with connecting the braided shielding to the connector(Diagram shows how I have it setup). Additionally I wanted to make sure that wiring this way is acceptable, and will work!
Thanks in advance for any help, I apologize for the ghetto diagram, its the best i could draw up!
Materials
1) Canare L-4E5C Cable (8ft)
2) Neutrix NP3X Stereo Phone Plug
3) Cardas Senn Connectors.