RasmusseN
500+ Head-Fier
- Joined
- Jan 16, 2007
- Posts
- 730
- Likes
- 11
I found the files downloaded them extracted them to a floppy, which I had to search for around my house a long with a floppy cable.
I got it all loaded up ran into another problem couldn't get my computer to boot into safe mode with command prompt found out it was my usb keyboard... had to use a ps2 adapter.
after, I get into the command prompt I start typing the stuff I found on the internet thinking it would work to no avail finally typed something in correctly only to come up with a list of what to pick end up picking #9 again what I thought was correct
went into more detail to figure out what was the correct one #7? tried that not working
list:
[1] Write To EEPROM for 1724HT + AK4586 with 24.576 MHz crystal
[2] Write To EEPROM for 1724HT + VT1616 with 24.576 MHz crystal
[3] Write To EEPROM for 1724HT + AK4586 with 49.152 MHz crystal
[4] Write To EEPROM for 1724HT + VT1616 with 49.152 MHz crystal
[5] Write To EEPROM for 1724HT + WM8716 with 49.152 MHz crystal
[6] Write To EEPROM for 1724HT + AK4586+AK4380 with 49.152 MHz crystal
[7] Write To EEPROM for 1724HT + VT1616+WM8728 with 24.576 MHz crystal
[8] Write To EEPROM for 1724HT + VT1616+WM8728 with 49.152 MHz crystal
[9] Read From EEPROM
You MUST select the one according to which kind of sound card you get.
The 1st option is suitable for 1724PC(Envy24HT+VT1616) with 24.576 MHz crystal.
The 2nd option is suitable for 1724CE(Envy24HT+AK4586) with 24.576 MHz crystal.
The 3rd option is suitable for 1724PC(Envy24HT+VT1616) with 49.152 MHz crystal.
The 4th option is suitable for 1724CE(Envy24HT+AK4586) with 49.152 MHz crystal.
The 5th option is suitable for Onkyo sound card (Envy24HT+WM8716) with 49.152 MHz crystal.
The 6th option is suitable for VPSD 8CH(Envy24HT+AK4586+AK4380) with 49.152 MHz crystal.
The 7th option is suitable for 1724PT 8CH(Envy24HT+VT1616+WM8728) with 24.576 MHz crystal.
The 8th option is suitable for 1724PT 8CH(Envy24HT+VT1616+WM8728) with 49.152 MHz crystal.
The 9th option is used to read the content of EEPROM.
in the end I am sick of this sh!t, and pissed...I need help
If someone could walk me through the steps and answer my questions or help me to get this done I'd greatly appreciate it
I got it all loaded up ran into another problem couldn't get my computer to boot into safe mode with command prompt found out it was my usb keyboard... had to use a ps2 adapter.
after, I get into the command prompt I start typing the stuff I found on the internet thinking it would work to no avail finally typed something in correctly only to come up with a list of what to pick end up picking #9 again what I thought was correct
went into more detail to figure out what was the correct one #7? tried that not working
list:
[1] Write To EEPROM for 1724HT + AK4586 with 24.576 MHz crystal
[2] Write To EEPROM for 1724HT + VT1616 with 24.576 MHz crystal
[3] Write To EEPROM for 1724HT + AK4586 with 49.152 MHz crystal
[4] Write To EEPROM for 1724HT + VT1616 with 49.152 MHz crystal
[5] Write To EEPROM for 1724HT + WM8716 with 49.152 MHz crystal
[6] Write To EEPROM for 1724HT + AK4586+AK4380 with 49.152 MHz crystal
[7] Write To EEPROM for 1724HT + VT1616+WM8728 with 24.576 MHz crystal
[8] Write To EEPROM for 1724HT + VT1616+WM8728 with 49.152 MHz crystal
[9] Read From EEPROM
You MUST select the one according to which kind of sound card you get.
The 1st option is suitable for 1724PC(Envy24HT+VT1616) with 24.576 MHz crystal.
The 2nd option is suitable for 1724CE(Envy24HT+AK4586) with 24.576 MHz crystal.
The 3rd option is suitable for 1724PC(Envy24HT+VT1616) with 49.152 MHz crystal.
The 4th option is suitable for 1724CE(Envy24HT+AK4586) with 49.152 MHz crystal.
The 5th option is suitable for Onkyo sound card (Envy24HT+WM8716) with 49.152 MHz crystal.
The 6th option is suitable for VPSD 8CH(Envy24HT+AK4586+AK4380) with 49.152 MHz crystal.
The 7th option is suitable for 1724PT 8CH(Envy24HT+VT1616+WM8728) with 24.576 MHz crystal.
The 8th option is suitable for 1724PT 8CH(Envy24HT+VT1616+WM8728) with 49.152 MHz crystal.
The 9th option is used to read the content of EEPROM.
in the end I am sick of this sh!t, and pissed...I need help
If someone could walk me through the steps and answer my questions or help me to get this done I'd greatly appreciate it