[blazinblazin]

That is what E12A will do to any IEM. 

But I can't believe there is an IEM that is sibilant after using comply. I need more treble usually, so I am curious on this 

I had already changed to Spinfit tip.
Now I can withstand the Sibilant without comply for most of my music.

It's a Ocharaku Flat4-AKA Type II. An open type IEM.

http://ocharaku.jp/sound/service/

 

[Skullbox]

Thanks to the E12A I am able to reduce the Sibilance and enjoy the sound of this IEM.

I've see a cap on your X3 Line out jack ... what for, where U get it ?

 

[notfitforpublic]

  Hi
 
I'm using a X5ii with Fidue A83 IEM's. I've always used an E12A with the full sized headphones I was using before, but with the Fidue's, I'm not sure I'm not loosing a little detail due to the E12A's warmth?
 
Anyone have a similar experience?
 
Regards
 
Darren

Yes, experienced something very similar with my Noble 3U's. I got my more preferred sound out of the X3ii on low gain. Still a stellar amp however, the Nobles are just my only IEM.

 

[Dobrescu George]

I had already changed to Spinfit tip.
Now I can withstand the Sibilant without comply for most of my music.

It's a Ocharaku Flat4-AKA Type II. An open type IEM.

http://ocharaku.jp/sound/service/

 
 
Between trying to like them blindly and not wanting to argue, the shape seems rather... uncomfortable. 

 

[blazinblazin]

I've see a cap on your X3 Line out jack ... what for, where U get it ?

That's a X5II audio port. It's just a small dust cover I got last time for my phone. Got it from some China website.

Since I am not using it, so I think it's good to cover it up.

 

[blazinblazin]

Between trying to like them blindly and not wanting to argue, the shape seems rather... uncomfortable. 

You just plug in all you feel seems to be the tips. Just that you can't sleep on it.

 

[gEEkzz]

Which dap would be good to pair with e12a?
 
My current setup: iPhone4s + Westone 3 + e12a

 

[Skullbox]

Which dap would be good to pair with e12a?

My current setup: iPhone4s + Westone 3 + e12a

Personaly, I'm using FiiO X3ii DAP, and coupled well with my Westone W4r.

I can recommand rading the FiiO X3 2nd generation forum to get more info...

 

[Dobrescu George]

  Which dap would be good to pair with e12a?
 
My current setup: iPhone4s + Westone 3 + e12a

 

Personaly, I'm using FiiO X3ii DAP, and coupled well with my Westone W4r.

I can recommand rading the FiiO X3 2nd generation forum to get more info...

 
 
X3ii, X5ii, both are amazing with E12A.
 
I can guarantee that for both, you'll be getting a lot of quality for the paid price. Tested both, and I can say that both are great. I would personally go for X5ii, but it's a matter of personal preference. 

 

[Tuneslover]

X3ii, X5ii, both are amazing with E12A.

I can guarantee that for both, you'll be getting a lot of quality for the paid price. Tested both, and I can say that both are great. I would personally go for X5ii, but it's a matter of personal preference. 

I agree, I had the X3ii and then upgraded to the X5ii and both DAP's sound very good with the E12a.

 

[gEEkzz]

Thanks for the recommendations!
 
Anyone using the E12A for their mobile phones?
 
I was wondering if I'm limiting the potential of E12A when I connect it to my devices via the headphone out of my mobile devices? (3.5mm)(Double amping)

 

[Dobrescu George]

  Thanks for the recommendations!
 
Anyone using the E12A for their mobile phones?
 
I was wondering if I'm limiting the potential of E12A when I connect it to my devices via the headphone out of my mobile devices? (3.5mm)(Double amping)

 
I used it for mobile phone. 
 
In theory, as long as the volume is at 100% on mobile phone, you should have less signal degradation than if the volume was lower on mobile phone. 
 
|But double amping will degrade the signal a bit more than if using a line out. How much, is a matter of how much you can hear it, it just is a more or less degraded signal|

 

[Tayyab Pirzada]

I just got my Fiio E12A. It worked for a while but then suddenly it shows the blue light blinking and no sound comes. I pressed reset button with a toothpick and it changes nothing. I charged it fully and still same issue.
 
Can anyone help?

 

[FiiO]

  I just got my Fiio E12A. It worked for a while but then suddenly it shows the blue light blinking and no sound comes. I pressed reset button with a toothpick and it changes nothing. I charged it fully and still same issue.
 
Can anyone help?

Tayyab we are so sorry that your E12A may need to be repaired ,please kindly send email to support@fiio.net ,our engineer will help you out, or you can contact the seller .
 
We are so sorry for this inconvenience.
 
Best Regards,

 

[riodgarp]

When will fiio to make high end portable amplifier as e12a successor?