Tidal MQA 2.21 build
I have the Album I used for this test that I purchased. It is 24/48 MQA
I can however hear an audible difference when using the Quad DAC with this build. The sound cuts out when turning the DAC on and off or changing the sound preset/digital filters. When using the newer builds the Quad DAC does nothing whether on or off or changing presets.
I have the Album I used for this test that I purchased. It is 24/48 MQA
I can however hear an audible difference when using the Quad DAC with this build. The sound cuts out when turning the DAC on and off or changing the sound preset/digital filters. When using the newer builds the Quad DAC does nothing whether on or off or changing presets.
Output thread Ox724d65 ddco, name Audio Out 1D, tid 1604, type o (MDXER): I/O handle: 29
Standby: yes
Sample rate: 48000 Hz
HAL frame count: 768
HAL Format: 0 (AUDIO_FORMAT_PCM_16_8IT) HAL buffer size: 3072 bytes
Channel count: 2
Channel mask: Ox00000003 (front-left, front-right) Processing format: DtS (AUDIO_FORMAT_PCM_FLOAT)
Processing frame size: 8 bytes
Pending config events: none Output device: 0 (AUDIO_DEVICE_NONE)
Input device: 0 (AUDIO DEVICE NONE) Audio source: O CAUDIO_SOURCE_DEFAULT)
Timestamp stats: n=0 disco cold=0 nRdy=0 err-i jitterMs Cunavai1) localSR(nan, nan) corrected itteris(unavail)
Timestamp corrected: no
Master mute: off Normal frame count: 1152
Total writes: 0 Fast track avai IMask-Oxfe no no 0 full
Delayed writes: 0 Blocked in write: no
Suspend count: 0 Sink buffer : 0x72dd1a8800
Mixer buffer: Ox724debbf80 Effect buffer: Ox72ddla6000
delay Ov72ddt ao flags o (AUDIO OUTPUT FLAGNONE)
Frames written: 0 Suspended Frames: 0
Pipesink frames written: G Hal stream dump:
Standby: yes Frames written: 0 Errors: 0
Signal power history: (none) Thread throttle time (msecs): 0
Audio Mixer tracks: Master mono off
Master balance: 0.000000 (0.000000)
FastMixer thread Ox724dG delco tid-1603 FastMixer command-COLD IDLE write Sequence-0 frames written-0 nunTracks=0 writeErrors=0 underruns-0 overruns=0
sampleRate-o frameCount-o measuredwarmup-0 ms, warmupCycles-0 mixPeriod=nan ms latency=0.00 ms
Timestamp stats: n=0 disc-o cold-0 nRdy-0 err-0 jitterks (unavai 1) TocalSR (nan, nan) correcteditterMs (unavai1)
No FastMixer statistics available currently Fast tracks: sMaxFastTracks=8 activelask=0
Index Active Full Partia
Standby: yes
Sample rate: 48000 Hz
HAL frame count: 768
HAL Format: 0 (AUDIO_FORMAT_PCM_16_8IT) HAL buffer size: 3072 bytes
Channel count: 2
Channel mask: Ox00000003 (front-left, front-right) Processing format: DtS (AUDIO_FORMAT_PCM_FLOAT)
Processing frame size: 8 bytes
Pending config events: none Output device: 0 (AUDIO_DEVICE_NONE)
Input device: 0 (AUDIO DEVICE NONE) Audio source: O CAUDIO_SOURCE_DEFAULT)
Timestamp stats: n=0 disco cold=0 nRdy=0 err-i jitterMs Cunavai1) localSR(nan, nan) corrected itteris(unavail)
Timestamp corrected: no
Master mute: off Normal frame count: 1152
Total writes: 0 Fast track avai IMask-Oxfe no no 0 full
Delayed writes: 0 Blocked in write: no
Suspend count: 0 Sink buffer : 0x72dd1a8800
Mixer buffer: Ox724debbf80 Effect buffer: Ox72ddla6000
delay Ov72ddt ao flags o (AUDIO OUTPUT FLAGNONE)
Frames written: 0 Suspended Frames: 0
Pipesink frames written: G Hal stream dump:
Standby: yes Frames written: 0 Errors: 0
Signal power history: (none) Thread throttle time (msecs): 0
Audio Mixer tracks: Master mono off
Master balance: 0.000000 (0.000000)
FastMixer thread Ox724dG delco tid-1603 FastMixer command-COLD IDLE write Sequence-0 frames written-0 nunTracks=0 writeErrors=0 underruns-0 overruns=0
sampleRate-o frameCount-o measuredwarmup-0 ms, warmupCycles-0 mixPeriod=nan ms latency=0.00 ms
Timestamp stats: n=0 disc-o cold-0 nRdy-0 err-0 jitterks (unavai 1) TocalSR (nan, nan) correcteditterMs (unavai1)
No FastMixer statistics available currently Fast tracks: sMaxFastTracks=8 activelask=0
Index Active Full Partia
Last edited: