Nicolas2305
500+ Head-Fier
- Joined
- Jun 11, 2008
- Posts
- 552
- Likes
- 199
While going thru the amb sanity check steps, I encountered a problem while checking for shorts. There seem to be a short between pin 4 and IG of both U4 and U5. While checking at the schematics I can't stop wondering about this short because on the schematics, it seems like pin 4 on both is directly connected to V- with a path going to a multilayer ceramic capacitor (C8- and C7-)
Any input on this? It clearly states that I shouldn't go further unless this trouble is solved.
Another thing, while soldering Battery connectors, I noticed (too late) that the power led (LED2) was lit. I don't know if those two problems are linked, I triple-checked for solder bridges and found none.
Help would be much appreciated.
Any input on this? It clearly states that I shouldn't go further unless this trouble is solved.
Another thing, while soldering Battery connectors, I noticed (too late) that the power led (LED2) was lit. I don't know if those two problems are linked, I triple-checked for solder bridges and found none.
Help would be much appreciated.