[Mirukothe1st]

Read the Rebooting and firmware doc. It is above the file you circled. You need the firmware file and the tool necessary to install the file to your W2

I got it recognized. Appreciate the help!

 

[Andrew_WOT]

You need to go to
https://drive.google.com/drive/u/1/folders/1--wlg4ZLTdNPHNVJMQri53ReK7jZmKRS
it has the latest FW and Windows driver. If you have Windows 10, release 1703 or later, universal UAC 2.0 driver should recognize W2, but you can also install L&P driver if you need ASIO and for some hypothetical better compatibility with HW, it's LuxuryPrecision_setup_WHQL_20210510.exe from the link above

 

[Mirukothe1st]

I notice there’s a rust stain in the 4.4mm jack and it doesn’t seem like it has oxidized the insides yet. Should I be worried about this?

 

[lpw2dragonfly]

Maybe it's leftover soldering agent . I think medical, industrial C2H5oH ~90% (not 5% 14% 40%) )))) - should dissolve this.
Doesn't look like rust.

 

[Mirukothe1st]

industrial C2H5oH ~90% (not 5% 14% 40%) )))) - should dissolve this.

So you’re telling me I should pour alcohol into the 4.4mm jack?

 

[musicday]

So you’re telling me I should pour alcohol into the 4.4mm jack?

No, rub it gently with an ear cotton bud.

 

[Mirukothe1st]

I tried scratching the stain because it didn’t come off with a q-tip and this is the result

 

[lpw2dragonfly]

cotton bud soaked in a drop С2H5oH ? rub vigorously but gently.
it is a professional method for cleaning printed circuit boards in electronics. if scratched, the "gold plating" will be damaged and, under adverse conditions, rust will begin.
there are still professional cleaners, but I do not recommend non-professionals for use.

 

[musicday]

Waiting for the USB type c cable made by L&P.
Hopefully it will be available at CanJam end of the month.

 

[LikeABell]

Hi guys, can someone help me understand how to use the SPDIF out on the L&P W2?

 

[frighter3]

You need to go to
https://drive.google.com/drive/u/1/folders/1--wlg4ZLTdNPHNVJMQri53ReK7jZmKRS
it has the latest FW and Windows driver. If you have Windows 10, release 1703 or later, universal UAC 2.0 driver should recognize W2, but you can also install L&P driver if you need ASIO and for some hypothetical better compatibility with HW, it's LuxuryPrecision_setup_WHQL_20210510.exe from the link above

I have followed the instruction. However, it still cannot detect the w2.

Has anyone experienced the same & knowing how to solve it?

Thx

 

[Mirukothe1st]

I have followed the instruction. However, it still cannot detect the w2.

Has anyone experienced the same & knowing how to solve it?

Thx

Download this 3 files and follow the guide in the drive above (it's both in chinese and english)

 

[frighter3]

Download this 3 files and follow the guide in the drive above (it's both in chinese and english)

Oh, I thought w1_v1.0.3.6 is not applicable for w2.

Let me have a try, thx

 

[musicday]

That's the latest firmware update and it works very well.

 

[gylyf]

I apologize if this has been addressed in the thread - I tried searching and couldn’t find an answer to my question. I recently sold my Lotoo S2 and am considering either the W2 OG or the 131. One of the uses I’m considering, aside from using it when I’m out and about, is feeding SPDIF into my Mojo 2 to see if there’s a noticeable difference compared to the Mojo‘s USB input. Here’s my question: can anyone confirm that the W2 passes bit perfect audio via its SPDIF output or is the output capped? Is, eg, 24/192 audio downsampled? I don’t have a ton of high-res, but I have enough that I’d like to minimize the amount of processing audio goes through prior to reaching the Mojo.

Edit, in case anyone finds this helpful: I ended up ordering a W2 OG and can confirm it passes 24/192 audio untouched from its SPDIF out.