Little Dot I+ Tube Rolling
Feb 24, 2009 at 8:01 PM Post #301 of 3,154
Quote:

Originally Posted by Baird GoW /img/forum/go_quote.gif
3. Can you replace it with ANY OpAmp?


You need a dual opamp.
Single opamps will work, too, but you will need two of them and a adapter.
I dont know about other specifications. I just followed the recommendations regarding wich opamp will fit here.
 
Feb 24, 2009 at 10:26 PM Post #302 of 3,154
thanks alot
 
Feb 24, 2009 at 10:28 PM Post #303 of 3,154
I´m sitting here listening to my HD650s which arrived today (for the second time), which are the latest version with the silver screen. I also got my LT1364 today, the reason why this is my second listening session. First time was with the OPA2107, this second time with the all new LT1364. The tubes I have are the popular Sylvania Gold 408As, which should be well burnt in.

Well I´m not good at all putting words to what I´m hearing, but I´ll give it a shot, also this is from memory because I had about a 2h break between the tests, also there could be differences in volume which also could explain certain differences.

I think the sound has gotten generally clearer. I feel that this is because the high bass/low mids seems a bit tuned down. Though the bass now seems as it extends deeper. So the lower regions seem overall clearer/cleaner than before. Mids are a bit harder to really define and put into words what has changed, I think that there are differences, but can´t really point out what they are, same goes for the highs, maybe a tad more "shimmer" from cymbals and those kinds of instruments. Soundstaging seems a little more defined and it´s easier to point out where the sounds are coming from.

Overall there are small changes, which I think make my 'phones sound more open and natural.
 
Feb 24, 2009 at 10:44 PM Post #304 of 3,154
Can anyone tell me what the best tubes and opamp would be for stock Ultrasone HFI-780? I'm looking for synergy.
 
Mar 2, 2009 at 8:44 AM Post #305 of 3,154
Anyone have a clue to my last question?
 
Mar 2, 2009 at 11:29 AM Post #306 of 3,154
No, sorry pal, my LD I+ is quite new and i have not had the chance to start any tube-op-amp rolling. And I doubt i will do it anytime soon.
 
Mar 3, 2009 at 4:23 AM Post #307 of 3,154
Hey first time poster here. Just wanted to throw in my 2 cents. I swapped in a lm4562 op amp and was really pleased. This brought the sound to a more accurate level. With this OP amp in a swapped out the 6ji tubes.(I think thats what mine came with, but the j1 and j2 jumpers were on?) I put in some WE403A's. I do not like the sound at all. The level of detail and imaging are not very good at all. I actually preferred the stock tubes over these WE's on my Grado sr225's. I suppose I am back on the hunt for a decent set of tubes. I am hoping for a velvety, open, detailed sound. Any advice is appreciated!
 
Mar 4, 2009 at 1:18 PM Post #309 of 3,154
The Tung Sols reduce the difference in sound between my I+ and my (solid state) integrated amp to such a degree that I have no preference.
Since I am a tad short on funds at this point (unexpectedly had to buy a car!), I think I will use the integrated and sell the I+.
With shipping, I paid $143 for the I+, $77 for the tubes, and $15 for the opamp upgrade. I will also throw in a pair of Westinghouse tubes that were $28, bringing the total value to $263. Does $200 seem like a good deal for this package?
 
Mar 4, 2009 at 7:00 PM Post #310 of 3,154
Dont go off topic but I would leave it
 
Mar 7, 2009 at 11:28 AM Post #311 of 3,154
I got the standard tubes and have not gotten a chance to change the op amp yet. I invested a few hours reading all the posts here and I am surprised by how decent the stock tube/op amp sounds. OF course I would like to try GA408s but it seems very difficult to get a hold of. I got the Wester Electric 408 tubes, again.... did not have a chance to roll them in because I have been too busy...

Guys,.. so what do you think? what is the best op amp/ tube combo? Mullard M 8100, Sylvania Gold Brand GB408A, Amperex 6AK5W with LT1364??


Thanx for the help in advance.
 
Mar 7, 2009 at 12:28 PM Post #312 of 3,154
The 6J1 pentodes are quite good IMHO
 
Mar 10, 2009 at 6:47 PM Post #313 of 3,154
Well, any more impressions? I might go tomorrow to buy some op-amps, if I find them at a shop from university. Do not know which one I should look for, though
 
Mar 14, 2009 at 2:10 PM Post #314 of 3,154
Quote:

Originally Posted by Bullseye /img/forum/go_quote.gif
Well, any more impressions? I might go tomorrow to buy some op-amps, if I find them at a shop from university. Do not know which one I should look for, though


lt1364 or op2107 is a good start.

Be sure to get the 8-lead pdip kind of opamp:
http://www.linear.com/designtools/packaging/pdip/N8.pdf
 
Mar 14, 2009 at 3:21 PM Post #315 of 3,154
Alrite,.. so I got my LT1364! Installed it,.. and.... the improvement of SQ is very noticeable. Then,.. I rolled in my new WE408A and I am really liking the sound! I am soo happy that I got the LT1364! Good upgrade for $10! I think the WE408A are also significantly better than the original tubes. Anyways,.. I am happy! For those who got the LD I+ go and get the LT1364 and a nice pair of matched tubes now
smily_headphones1.gif
 

Users who are viewing this thread

Back
Top