wondering how good they are in their intended role, as speaker amps.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Integrated Tube Amplifiers under $300 (pictures/ comments)
- Thread starter Haoting
- Start date
endless402
500+ Head-Fier
unless u got some super efficient speakers, i doubt they'll sound any good with those power ratings
Haoting
100+ Head-Fier
- Joined
- Mar 4, 2009
- Posts
- 122
- Likes
- 10
Quote:
It's too bad that many speaker manufacturers are building ineffiecient speakers (less than 90 dB) to match solid state amps when tube (hybrid) amps sound superior, especially at the same price point. Even Skylab shares this same opinion in one of his reviews.
Furthermore, if you've read the Stereomojo review above, the critic preferred the Xindak tube amp at $500 over his $2500 Bryston solid state amplifier.
Here's a nice comparison between tubes vs transistors.
http://spectrum.ieee.org/print/1640
Originally Posted by endless402 /img/forum/go_quote.gif unless u got some super efficient speakers, i doubt they'll sound any good with those power ratings |
It's too bad that many speaker manufacturers are building ineffiecient speakers (less than 90 dB) to match solid state amps when tube (hybrid) amps sound superior, especially at the same price point. Even Skylab shares this same opinion in one of his reviews.
Furthermore, if you've read the Stereomojo review above, the critic preferred the Xindak tube amp at $500 over his $2500 Bryston solid state amplifier.
Here's a nice comparison between tubes vs transistors.
http://spectrum.ieee.org/print/1640
intelonetwo
New Head-Fier
- Joined
- Apr 1, 2007
- Posts
- 24
- Likes
- 0
Quote:
As many have said, certainly.
Originally Posted by UncleDavid218 /img/forum/go_quote.gif Would any of these be powerful enough to push a pair of HSU HB-1 MK2s? |
As many have said, certainly.
Alpha 1 Omega
100+ Head-Fier
- Joined
- May 6, 2008
- Posts
- 413
- Likes
- 10
I am looking to get one of its cousins the Yaqin MC-5881A
MPG1
New Head-Fier
- Joined
- May 17, 2009
- Posts
- 5
- Likes
- 0
Since we're into exotic China gear, let me place a vote for tube amps that come from my own country as well. Very good and more than a match for China amps. . .
Kinetic Audio Technologies
Kinetic Audio Technologies
Haoting
100+ Head-Fier
- Joined
- Mar 4, 2009
- Posts
- 122
- Likes
- 10
Quote:
Well, it's nice to know that the Phillipines is also into the warm tubey sound. Anyway, the more competition there is for tube amps, the more choice we have as consumers. So, which one those amps would you recommend for under $300?
Originally Posted by MPG1 /img/forum/go_quote.gif let me place a vote for tube amps that come from my own country as well. Very good and more than a match for China amps. . . |
Well, it's nice to know that the Phillipines is also into the warm tubey sound. Anyway, the more competition there is for tube amps, the more choice we have as consumers. So, which one those amps would you recommend for under $300?
Haoting
100+ Head-Fier
- Joined
- Mar 4, 2009
- Posts
- 122
- Likes
- 10
[size=small]Xiangsheng H-80BIII Tube/transistor hybrid amplifier
[/size]Hefei XiangSheng Electronic Co.,Ltd
[size=small][size=small][size=x-small]Signal to Noise Ratio : 89DB
Input Impedance: 100K
Output Impedance: 4~16 ohm
Frenqueney responses: 10Hz to 40KHz
Distortion: less than 0.01%
Output Power: 80W×2
SIZE: 340mm(width)×165mm(Height)×385mm(Depth)
Net weight: 8.5kg[/size][/size]
[size=small][size=x-small]
[/size][/size]
[size=small][size=x-small]
[/size][/size]
[/size]
[/size]Hefei XiangSheng Electronic Co.,Ltd
[size=small][size=small][size=x-small]Signal to Noise Ratio : 89DB
Input Impedance: 100K
Output Impedance: 4~16 ohm
Frenqueney responses: 10Hz to 40KHz
Distortion: less than 0.01%
Output Power: 80W×2
SIZE: 340mm(width)×165mm(Height)×385mm(Depth)
Net weight: 8.5kg[/size][/size]
[size=small][size=x-small]
[/size][/size]
[size=small][size=x-small]
[/size][/size]
[/size]
Skylab
Reviewerus Prolificus
The Ming-Da MC8407C is also a nice tube integrated/headphone amp. Here is mine:
Haoting
100+ Head-Fier
- Joined
- Mar 4, 2009
- Posts
- 122
- Likes
- 10
Here's an amazing tube hybrid amplifier, but it'll cost you more than $300.
[size=small]ShengYa A10CS[/size]
A superb integrated amp with state of the art features that make it one of the best hybrid integrated amplifiers on the market.
4 12AX7 tubes are used in a double triode (Class A) configuration for low level inputs. (The tube in the window is a working, active in the circuit, 12AX7). A 6Z4 rectification tube is used for smooth transients and a warm tube sound. As a matter of fact, the preamp section alone in this integrated is probably one of the best out there.
The 150 watt solid state amplification system is equally impressive. The bias is set to class A for the first 10 watts before switching to class AB. In order to accomplish this, the amp has to be built superbly in order to sustain the high heat dissipation of the bias. The ALPS volume control, Solen caps and low noise high power torodial transformer fit the bill to deliver clean and concise power to your speakers.
[size=small]ShengYa A10CS[/size]
A superb integrated amp with state of the art features that make it one of the best hybrid integrated amplifiers on the market.
4 12AX7 tubes are used in a double triode (Class A) configuration for low level inputs. (The tube in the window is a working, active in the circuit, 12AX7). A 6Z4 rectification tube is used for smooth transients and a warm tube sound. As a matter of fact, the preamp section alone in this integrated is probably one of the best out there.
The 150 watt solid state amplification system is equally impressive. The bias is set to class A for the first 10 watts before switching to class AB. In order to accomplish this, the amp has to be built superbly in order to sustain the high heat dissipation of the bias. The ALPS volume control, Solen caps and low noise high power torodial transformer fit the bill to deliver clean and concise power to your speakers.
Haoting
100+ Head-Fier
- Joined
- Mar 4, 2009
- Posts
- 122
- Likes
- 10
[size=large]The new S.E.X. amp[/size]
[size=x-small]The new S.E.X. kit is a stereo integrated single ended triode (SET) amplifier of 2 watts per channel output. [/size]
Single Ended eXperimenter's Kit
[size=x-small]The amplifier's power output is approximately 2 watts RMS per channel at 10% THD at 500Hz, similar to a single ended 45 tube amplifier. [/size]
[size=x-small]Frequency response at 1V output is -3dB at 27Hz and 22kHz. The amplifier has an input sensitivity of .62V RMS and a gain of approximately 15 dB at 1 kHz and can be wired for 8 ohm or 4 ohm speakers. 16 ohm speakers will run well on the 8 ohm tap at slightly reduced power levels. Input impedance is 100Kohms. [/size]
[size=x-small]Assembly is a one or two evening affair, designed for the builder with little or no kit assembly experience. A very thorough[/size] [size=x-small][size=x-small]assembly manual (the S.E.X. Manual) is included in Adobe PDF format on a CD ROM, containing step by step printed instructions you check off as you work, detailed photos of the chassis underside[/size] [size=x-small]and components, and a thorough [/size][/size]
[size=x-small][size=x-small]
checkout procedure.[/size][/size]
[size=x-small]The combination of low noise and ample transformer coupled output drive means the S.E.X. amp is perfect for use both as a loudspeaker amp and as a headphone amp, It works great with high efficiency (97 dB or higher) speakers for listening room systems that work well with similarly powered 45 amps, and practically begs to be plugged into computer sound cards and smaller speakers for desktop audio systems. An IHF standard output configuration on the headphone jack means exceptional low noise performance with headphones of virtually any impedance. The integral level control makes a very simple system possible. Only the addition of a source (CD player, portable disc player, Ipod, sound card, phono preamp, tuner, etc.) and speakers or headphones is needed to get the three dimensional, highly resolved sound of single ended triodes. [/size]
[size=x-small]The new S.E.X. kit is a stereo integrated single ended triode (SET) amplifier of 2 watts per channel output. [/size]
Single Ended eXperimenter's Kit
[size=x-small]The amplifier's power output is approximately 2 watts RMS per channel at 10% THD at 500Hz, similar to a single ended 45 tube amplifier. [/size]
[size=x-small]Frequency response at 1V output is -3dB at 27Hz and 22kHz. The amplifier has an input sensitivity of .62V RMS and a gain of approximately 15 dB at 1 kHz and can be wired for 8 ohm or 4 ohm speakers. 16 ohm speakers will run well on the 8 ohm tap at slightly reduced power levels. Input impedance is 100Kohms. [/size]
[size=x-small]Assembly is a one or two evening affair, designed for the builder with little or no kit assembly experience. A very thorough[/size] [size=x-small][size=x-small]assembly manual (the S.E.X. Manual) is included in Adobe PDF format on a CD ROM, containing step by step printed instructions you check off as you work, detailed photos of the chassis underside[/size] [size=x-small]and components, and a thorough [/size][/size]
[size=x-small][size=x-small]
[size=x-small]The combination of low noise and ample transformer coupled output drive means the S.E.X. amp is perfect for use both as a loudspeaker amp and as a headphone amp, It works great with high efficiency (97 dB or higher) speakers for listening room systems that work well with similarly powered 45 amps, and practically begs to be plugged into computer sound cards and smaller speakers for desktop audio systems. An IHF standard output configuration on the headphone jack means exceptional low noise performance with headphones of virtually any impedance. The integral level control makes a very simple system possible. Only the addition of a source (CD player, portable disc player, Ipod, sound card, phono preamp, tuner, etc.) and speakers or headphones is needed to get the three dimensional, highly resolved sound of single ended triodes. [/size]
NoPants
1000+ Head-Fier
- Joined
- Aug 14, 2006
- Posts
- 1,003
- Likes
- 95
I'm all for a showcase of tube amps, but seeing as the thread OP specifically titled this amps under 300$, then it should probably stay that way...the SEX amp is definitely not sub-300$
Let's not forget to mention the advertisment feel of this whole thread to begin with...
Let's not forget to mention the advertisment feel of this whole thread to begin with...
Haoting
100+ Head-Fier
- Joined
- Mar 4, 2009
- Posts
- 122
- Likes
- 10
Quote:
NoPants, you're right. I was giving a free plug to the dudes selling the DIY SEX amp dudes. I was checking if anyone was paying attention.
If anyone knows of an affordable DIY integrated tube amplifier (under $300), please post it in this thread.
Furthermore, since there is no one company or one product being hyped, I would say that some other threads are more of an ad than this one. Anyway, I did call this thread a "buyer's guide to affordable tube amps" earlier in this thread.
Originally Posted by NoPants /img/forum/go_quote.gif I'm all for a showcase of tube amps, but seeing as the thread OP specifically titled this amps under 300$, then it should probably stay that way...the SEX amp is definitely not sub-300$ Let's not forget to mention the advertisment feel of this whole thread to begin with... |
NoPants, you're right. I was giving a free plug to the dudes selling the DIY SEX amp dudes. I was checking if anyone was paying attention.
If anyone knows of an affordable DIY integrated tube amplifier (under $300), please post it in this thread.
Furthermore, since there is no one company or one product being hyped, I would say that some other threads are more of an ad than this one. Anyway, I did call this thread a "buyer's guide to affordable tube amps" earlier in this thread.
some1x
Headphoneus Supremus
- Joined
- May 20, 2003
- Posts
- 2,199
- Likes
- 86
I'm not fond of the Chinese amps on eBay (I'ved tried a couple: an ASL KT88 amp and some random 2A3 amp, and the quality was quite lacking).
I'd much rather get a used amp from audiogon or a good DIY amp built on eBay ... for example
Custom Stereo SE-EL84 Tube Amp 12AX7, 6CA4 SWEET! - eBay (item 250444796249 end time Jun-21-09 18:11:01 PDT)
I'd much rather get a used amp from audiogon or a good DIY amp built on eBay ... for example
Custom Stereo SE-EL84 Tube Amp 12AX7, 6CA4 SWEET! - eBay (item 250444796249 end time Jun-21-09 18:11:01 PDT)
Users who are viewing this thread
Total: 3 (members: 0, guests: 3)