iFi audio's worst kept secret: the hip-dac!
post-15446135
Thread Starter
Post #1 of 205

iFi audio

Sponsor: iFi Audio
Joined
Mar 20, 2013
Messages
5,893
Reaction score
3,029
Location
Location: HQ in the UK, but spread far and wide.
Joined
Mar 20, 2013
Location
Location: HQ in the UK, but spread far and wide.
Posts
5,893
Likes
3,029
Website
ifi-audio.com
iFi hip-dac warms the soul with intoxicating sound

With a sound as flavoursome and richly detailed as a delicious single malt, the hip-dac portable USB DAC/headphone amp delivers the perfect pick-me-up for any music lover on-the-go


1.jpg

Southport, England – iFi adds to its award-winning range of portable DAC/headphone amps with an all-new design – the hip-dac.

Smartly dressed in petrol blue with a touch of copper, the go-anywhere hip-dac is designed to slip discretely into a pocket and offers an extensive hi-res specification that belies its eminently affordable £149, (€159, $149) price tag.

The hip-dac replaces the inferior DAC (Digital-to-Analogue Convertor) and amp circuitry in smartphones, tablets, PCs and Macs to vastly improve headphone sound. Its design and performance set it apart from other DAC/headphone amps in its class – connect your playback device via USB, plug in your favourite corded headphones or in-ear monitors and the hip-dac delivers a sound brimming with bold dynamism and fluid refinement, effortlessly engaging the listener with all manner of music.

In the home, in the office, on a train or plane – the hip-dac is the music lover’s inseparable friend.

Digital stage

The DAC section is based around a Burr-Brown DAC chip that iFi uses extensively in its products, selected for its fluid, highly ‘musical’ sound quality and True Native architecture. This, combined with custom iFi circuitry, enables the hip-dac to deliver excellent sound quality across all manner of digital audio formats, including bit-perfect PCM, native DSD and MQA – the hi-res streaming codec, as used by Tidal’s ‘Masters’ tier.

Hi-res PCM and DXD audio data is supported at sampling rates up to 384kHz, alongside DSD from 2.8MHz to 12.4MHz (DSD64, 128 and 256). Thanks to the Burr-Brown chip’s True Native design, PCM and DSD take separate pathways – this enables both PCM and DSD to remain ‘bit-perfect’ in their native form right through to analogue conversion, which is not the case with most other DAC/headphone amps. Either side of the rotary volume control reside a pair of LEDs that change colour to indicate the format and sampling rate of the digital audio being played.

2.jpg

Extensive clock-locking eradicates jitter (digital distortion), using iFi’s GMT femto-precision clocking system to maintain the integrity of the digital signal until conversion to analogue.

Another circuit feature that separates this and iFi’s other DACs from competing designs is the XMOS chip, which processes audio data received at the USB input and is programmed in-house. Rather than relying on firmware supplied off-the-shelf, which is not typically optimised for audiophile-grade sound, iFi programs its own bespoke firmware to enhance audio processing.

iFi’s continuous software development allows features to be added or optimised via firmware updates, enabling the hip-dac to be tailored to the user’s playback priorities and ensuring it stays cutting-edge over time. Users can even download and install different versions of iFi firmware to experiment with different digital filters if they wish.

Analogue stage

The hip-dac’s amp circuitry is of balanced (differential) design – highly unusual in a DAC/headphone amp anywhere near this price point.

The circuitry incorporates a range of high-quality components, carefully selected for their performance in an audio context, including a custom iFi OV op-amp, TDK C0G class 1 ceramic capacitors, a precision low-noise power supply IC from Texas Instruments and a high-quality analogue volume pot (many portable DAC/headphone amps use inferior digital volume controls).

The headphone amp delivers 660mW of power from the balanced output (520mW from the single-ended output) into a 32-ohm load – impressive when compared to the hip-dac’s peers, ensuring compatibility with a wide range of headphone and earphone types. With a rating of 200mW from the balanced output into a 300-ohm load, it drives most power-hungry headphones with ease.

The amp stage features switchable gain, which iFi terms PowerMatch. This matches the level of drive to the load presented by the headphones, by adjusting input sensitivity and thereby signal strength. With high-sensitivity headphone types such as in-ear monitors, leave PowerMatch at its lower setting for ultra-low-noise performance. But if your headphones require more drive – most on/over-ear types, for example – press the PowerMatch button on the front panel to increase gain.

3.jpg

XBass is another user-selectable feature – a sophisticated form of ‘bass boost’ that enhances low frequencies without muddying the midrange, particularly useful with earphones and open-back headphones that may lack deep bass. It operates entirely in the analogue domain rather than messing with the digital signal via DSP and may be switched in or out of the signal path.

Get connected

The hip-dac’s USB input handles audio data up to 32-bit/384kHz and supports the ‘SuperSpeed’ USB 3.0 standard, as well as USB 2.0 for backwards compatibility. It is asynchronous, meaning that the data rate is regulated solely by the hip-dac’s specialised audio clock circuitry for accurate, jitter-free data transfer from the source device.

There are two USB ports – Type A for audio data and USB-C for charging. Unusually, the Type A input features a ‘male’ connector, rather than a typical ‘female’ port. This arrangement provides greater mechanical integrity than the USB/Micro USB ports commonly found on DAC/headphone amps from other manufacturers. It also offers an advantage to iPhone and iPad users, because it accepts Apple’s Lightning to USB Camera Adaptor directly without requiring an additional female-to-male USB adaptor. (The Camera Adapter is required to connect Apple iOS devices to third-party USB devices.)

Two outputs are provided – a 3.5mm socket for headphones with a single-ended cable/connector and a Pentaconn 4.4mm output enabling headphones equipped with balanced connectivity to take full advantage of the hip-dac’s differential amp design. In addition, the 3.5mm output benefits from iFi’s proprietary S-Balanced circuitry, cutting crosstalk and related distortion in half when used with regular, single-ended headphone connections – this is especially beneficial with high-sensitivity in-ear monitors. Combined with the hip-dac’s PowerMatch facility, these outputs deliver class-leading performance with a broader range of headphone/earphone types than other comparably priced DAC/amp designs.

The hip-dac’s 2200mAh battery lasts for around eight to 12 hours of playing time, depending on volume level and how power-hungry the connected headphones are. It comes bundled with three USB cables: a USB-C OTG (On-The-Go) cable, ideal for connecting Android devices and PCs/Macs with USB-C ports; a USB Type A cable; and a Type A to USB-C charging cable. (The Camera Adapter required to connect Apple iOS devices is purchased separately.)

4.jpg

With its petrol blue, 102x70x14mm, extruded aluminium enclosure, the hip-dac has a high-quality look and feel with a colour that is bang on trend – the Pantone Colour of the Year 2020 is also blue. Just the tonic for any headphone fan, the hip-dac is available from February at an RRP of £149 (€159, $149) and will be showcased at CanJam NYC 2020.

iFi audio hip-dac - useful links:

1. Unboxing vid
2. Tech Note #1
3. Tech Note #2
 
Last edited:
post-15446239
Post #2 of 205

gikigill

Headphoneus Supremus
Joined
Jan 29, 2012
Messages
3,835
Reaction score
599
Joined
Jan 29, 2012
Posts
3,835
Likes
599
Gimme Gimme Gimme!!!
 
     Share This Post       
post-15447669
Post #5 of 205

Narayan23

Headphoneus Supremus
Joined
Jul 4, 2015
Messages
1,723
Reaction score
626
Location
Right Here, Right Now
Joined
Jul 4, 2015
Location
Right Here, Right Now
Posts
1,723
Likes
626
Good looking product, curious as to how it will fare against the likes of Topping´s NX4 DSD which is very similar in exterior design and price, I hope it´s a huge success.
 
     Share This Post       
post-15447772
Post #7 of 205

rafaelo

100+ Head-Fier
Joined
Mar 9, 2017
Messages
340
Reaction score
178
Location
London
Joined
Mar 9, 2017
Location
London
Posts
340
Likes
178
Looking forward to reviewing this beauty. The 4.4 balanced is not convenient for me since I invested in so many 2.5 balanced cables but many wanted this so it is a fair choice. Hope is better than xCan which so much I still adore.
 
Last edited:
     Share This Post       
post-15447776
Post #8 of 205

joshnor713

1000+ Head-Fier
Joined
Apr 1, 2014
Messages
1,013
Reaction score
507
Location
Seattle Area
Joined
Apr 1, 2014
Location
Seattle Area
Posts
1,013
Likes
507
Looking forward to reviewing this beauty. The 4.4 balanced is not convenient for me since I invested in so many 2.5 balanced cables but many wanted this so it is fair choice. Hope is better than xCan which so much I still adore.
2.5mm to 4.4mm adapter?
 
     Share This Post       
post-15447787
Post #9 of 205

rafaelo

100+ Head-Fier
Joined
Mar 9, 2017
Messages
340
Reaction score
178
Location
London
Joined
Mar 9, 2017
Location
London
Posts
340
Likes
178
2.5mm to 4.4mm adapter?
Any suggestions for good adapters?

My balanced cables are good but cheap maybe is better to buy a new cable for my sennheisers. To my experience they are flying with the ifi audio products.
 
     Share This Post       
  • Like
Reactions: Hedgehog39
post-15449563
Post #10 of 205

NewEve

100+ Head-Fier
Joined
Nov 20, 2016
Messages
389
Reaction score
127
Joined
Nov 20, 2016
Posts
389
Likes
127
Age
35
Website
empeirosaudio.com
I have a USB-C to Apple Lightning cable from Audirect which came with their Beam: will it work with the Hip-DAC?

EDIT: Found the answer—no. Apparently: the USB Type A input is for audio transmission while the USB-C socket is for battery charging.
 
Last edited:
     Share This Post       
post-15449987
Post #11 of 205

iFi audio

Sponsor: iFi Audio
Joined
Mar 20, 2013
Messages
5,893
Reaction score
3,029
Location
Location: HQ in the UK, but spread far and wide.
Joined
Mar 20, 2013
Location
Location: HQ in the UK, but spread far and wide.
Posts
5,893
Likes
3,029
Website
ifi-audio.com
     Share This Post       
post-15451280
Post #13 of 205

iFi audio

Sponsor: iFi Audio
Joined
Mar 20, 2013
Messages
5,893
Reaction score
3,029
Location
Location: HQ in the UK, but spread far and wide.
Joined
Mar 20, 2013
Location
Location: HQ in the UK, but spread far and wide.
Posts
5,893
Likes
3,029
Website
ifi-audio.com
     Share This Post       
  • Like
Reactions: majo123
post-15453356
Post #14 of 205

keithmarsh

100+ Head-Fier
Joined
Feb 25, 2016
Messages
264
Reaction score
197
Location
London
Joined
Feb 25, 2016
Location
London
Posts
264
Likes
197
@iFi audio i’ve just received my Hip-Dac.

While the thug does sound great I have to say I’m a little disappointed with the build quality.

The volume knob sticks out at an angle so it’s doesn’t line up with the middle of the unit.

It also turns off before the ‘click’ so when you’re turning the volume down so suddenly find the unit has powered off and disconnected from your device.

There are also a few places on the edges where the blue finish is missing (showing the silver of the aluminium case).

Should I treat this as a defective unit and get a replacement or is this all normal with the Hip-Dac?

9A418315-92E6-4A69-ACA7-9859B9421A90.jpegB853C9B6-5210-430E-A4B1-C3BD4E223228.jpeg
 
     Share This Post       
post-15453401
Post #15 of 205

flyte3333

Previously known as Em2016
Joined
Jan 21, 2017
Messages
1,205
Reaction score
385
Joined
Jan 21, 2017
Posts
1,205
Likes
385
@iFi audio

Can you share details about the volume control?

Pot?

Or channel imbalance is avoided ?
 
     Share This Post       

Users Who Are Viewing This Thread (Users: 1, Guests: 1)

Top