swtnate
500+ Head-Fier
Also, fwiw, I personally would never dip an IEM shell with electronics and tubes installed. Seems like undue risk for what assuredly will one day be a complete loss.
Can you airbrush the Lack 3 directly, or you need to use the detax shellac instead? And would you need to thin the Lack 3? I am temptedAlso, fwiw, I personally would never dip an IEM shell with electronics and tubes installed. Seems like undue risk for what assuredly will one day be a complete loss.
I thin mine with something else but you can use it directly but they are very costly compared to doing it by brush.Can you airbrush the Lack 3 directly, or you need to use the detax shellac instead? And would you need to thin the Lack 3? I am tempted
Well I've ordered a cheap airbrush so will have a go soon if it works. Not sure what to expect at the moment, it is something new to play with though, which is nice. I only make for myself so not too concerned about using a bit extra but a bit worried that my Lack 3 is already a bit dirty and that could make dipping less than ideal.I thin mine with something else but you can use it directly but they are very costly compared to doing it by brush.
I'm curious about this too. I've bought randomly on AliExpress but you really can't tell what you're buying and you sometimes see what seems to be the same thing for very different prices from different sellersAre there sources for high performance dynamic drivers?
Do you use toluene or alcohol? I have a spray rig I haven't gotten around to setting up, so expect questions!I thin mine with something else but you can use it directly but they are very costly compared to doing it by brush.
I don't use toluene or alcohol with mine, sadly it's a developed process in the lab that I cannot share. But you can still use it straight out of the bottle.Do you use toluene or alcohol? I have a spray rig I haven't gotten around to setting up, so expect questions!
Looks ok to me. Be careful that you have it air tight though especially in the area between the spoutsSorry for so many questions. I figured out that silicone tubes can’t be extended/stretched. The nozzles of the drivers are squeezed between the tube, is this ok, or will this effect the sound?
I’ve three drivers and I can only fit a 3 mm and 2 mm tube through the nozzle of the shell. So combining the mid and high-mid driver is the only option.
Thank you!Looks ok to me. Be careful that you have it air tight though especially in the area between the spouts