Hi .I also have 20/20 but I find it easier and safer to do this with a magnifying glass. I don’t see myself soldering SWFK or E50DT0005 without magnifying glass for example
Do the E50DT0005 sound better than the SWFK ?
Hi .I also have 20/20 but I find it easier and safer to do this with a magnifying glass. I don’t see myself soldering SWFK or E50DT0005 without magnifying glass for example
I have not yet compared them directly, but it seems to me that there is more extension and the yield is better.Hi .
Do the E50DT0005 sound better than the SWFK ?
E50 it's not a replacement of SWFK. E50 first peak rise in 2khz, SWFK 7 and 10khz.Hi .
Do the E50DT0005 sound better than the SWFK ?
I was meaning as a tweeter with a capacitor ( from 10khz and up ) not as full range. I'm also very curious how will sound. They may outperform the swfk, isn't impossible. For me all sonion drivers sounded better than any knowles .I don’t have them yet, I still waiting my order.E50 it's not a replacement of SWFK. E50 first peak rise in 2khz, SWFK 7 and 10khz.
Than you for the link. Sadly, I think my ears are to small for this build
It depends. One example: If straight out of the box the ED has a better stage and more air than the Sonion 2389 dark and flat I choose Knowles.For me all sonion drivers sounded better than any knowles
that GQ is damped and it effects the wbfk extensionThan you for the link. Sadly, I think my ears are to small for this build
So I'll probably go with the masm 3 pro. Is it still rab 32033 + GQ30783? And how would I add a wbfk to it (The GQ already has one if I recall correctly)?
Yes it depends. Some prefer knowles and some prefer sonion.It depends. One example: If straight out of the box the ED has a better stage and more air than the Sonion 2389 dark and flat I choose Knowles.
Just wait for the 711. I tried tuning before it arriving too, but it doesn't make sense and will just increase your headache! A 711 will show issues right away.Hello, I am in the process of building my first CIEM. Making the housings is no longer a problem.
Now I have bought and installed Knowles GK31732 drivers.
I have installed a white damper on the tweeter after 7mm and nothing on the woofer. Both tubes are ID 1mm and approx. 13mm long.
The first listening test was very sobering, especially female voices sound bad, as if the singers were standing in a bath, quiet and somehow not clear. What could be the reason?
Unfortunately, I can't measure it yet because the 711 measuring microphone hasn't arrived yet.
Use single tube 2mm x 15 mm, no damper or gray/white damper in half tube. It should work fine out of the box.Now I have bought and installed Knowles GK31732 drivers.
I have installed a white damper on the tweeter after 7mm and nothing on the woofer. Both tubes are ID 1mm and approx. 13mm long.
hello, I didn’t have time to play with this config but it seems to me that the white damper is too weak on the 30017.Hello, I am in the process of building my first CIEM. Making the housings is no longer a problem.
Now I have bought and installed Knowles GK31732 drivers.
I have installed a white damper on the tweeter after 7mm and nothing on the woofer. Both tubes are ID 1mm and approx. 13mm long.
The first listening test was very sobering, especially female voices sound bad, as if the singers were standing in a bath, quiet and somehow not clear. What could be the reason?
Unfortunately, I can't measure it yet because the 711 measuring microphone hasn't arrived yet.
I think you are right!Just wait for the 711. I tried tuning before it arriving too, but it doesn't make sense and will just increase your headache! A 711 will show issues right away.
I will try it.Use single tube 2mm x 15 mm, no damper or gray/white damper in half tube. It should work fine out of the box.