sanekn
100+ Head-Fier
- Joined
- Mar 17, 2016
- Posts
- 111
- Likes
- 52
Can confirm, this link higher is the one!Ooh, can you leave a link?
Can confirm, this link higher is the one!Ooh, can you leave a link?
Here it is open sourceCan confirm, this link higher is the one!
Do you want it as aesthetic design?howdy yall
almost done with my first ciem
working on the faceplate right now and so my question is:
How can I put the circuit board holding the zobel into the faceplate with fotoplast?
i put the zobel on a small board (will fit, already checked) and would like it to be within the resin of the faceplate.
would i be able to suspend the board in the middle of curing resin or would i have to do this in layers?
yesDo you want it as aesthetic design?
If you want it to look great, you should embed it directly to the resin.
I never had problem my mold having bubbles. How do you melt yours?
As counterintuitive as it might be a vacuum might even increase the amount of bubbles :anyone try using a vacuum to get bubbles out of negative molds?
I never had problem my mold having bubbles. How do you melt yours?
As counterintuitive as it might be a vacuum might even increase the amount of bubbles :
No. But I never have problems with bubbles, sometimes there is one or two bubbles and if so I simply remove them with a piece of wire.ill get maybe 1 small bubble once in a while
i use a wax melter
do you know how krystalloid would react?
As counterintuitive as it might be a vacuum might even increase the amount of bubbles :
But if you compress your agar agar or whatever you use. Wouldn't you alter the shape of the mold? Such a soft material will form under such pressure wouldn't it?If you want to get rid of bubbles in a mold, a pressure pot would be recommendable.
Yeah, I forgot to mention that. I personally only use silicone to make my molds.But if you compress your agar agar or whatever you use. Wouldn't you alter the shape of the mold? Such a soft material will form under such pressure wouldn't it?