Home-Made IEMs | Page 417 | Headphone Reviews and Discussion - Head-Fi.org

MuZo2 · Mar 21, 2017 at 3:52 PM

Wen is super cheap, compared to Dremel
https://www.amazon.de/Dremel-Multifunktionswerkzeug-Zubeh%C3%B6re-Vorsatzger%C3%A4te-Werkzeugkoffer/dp/B014UXZMEG/ref=sr_1_5?s=diy&ie=UTF8&qid=1490125813&sr=1-5&keywords=dremel

but found one similar
https://www.amazon.de/Lund-79314-Mehrzweckschleifmaschine-135W/dp/B009SFTS88/ref=sr_1_7?s=diy&ie=UTF8&qid=1490125813&sr=1-7&keywords=dremel

bartzky · Mar 21, 2017 at 4:26 PM

Thanks guys! How are your experiences with those devices?

MuZo2 · Mar 21, 2017 at 4:42 PM

I have Dremel and works well for smoothing impressions and drilling holes in acrylic (diamond burs) also to make slots for connectors.
For polishing/buffing shells , its of no use.

Shilohsjustice · Mar 21, 2017 at 5:00 PM

Ok, so this one has thrown me for a loop, the four driver I've been playing with will has a horrible read on the coupler. In actuality it sounds relatively clean and has suitable bass. The kicker is I've spent all this time and effort and think I created a UE900 clone.

I mean when I have the prototype in one ear and the ue900 in the other they sound identical, I can't really tell the difference at all.

Here is a pic of the protype shelled up. I didn't do any finishing or polishing.

Shilohsjustice · Mar 21, 2017 at 5:04 PM

I will draw the crossover out later and post, maybe someone can throw it together and test to confirm it's performance!

Squirg · Mar 21, 2017 at 6:41 PM

Squirg · Mar 21, 2017 at 7:57 PM

squirg said:

Just finished these today -- CI/ED dual driver. First time working with Kirinite and really pleased with how easy it is to work with! Getting better at mixing colors too. Thanks again for all your tips!

Shilohsjustice · Mar 21, 2017 at 8:33 PM

squirg said:
Just finished these today -- CI/ED dual driver. First time working with Kirinite and really pleased with how easy it is to work with! Getting better at mixing colors too. Thanks again for all your tips!

Yep, I just fell in love!!!!!!!!!! Those are beautiful!!!!!!!!!!!

Shilohsjustice · Mar 21, 2017 at 8:36 PM

shilohsjustice said:
I will draw the crossover out later and post, maybe someone can throw it together and test to confirm it's performance!

Here is my current version layout.......

Cutty · Mar 21, 2017 at 9:49 PM

squirg said:
Just finished these today -- CI/ED dual driver. First time working with Kirinite and really pleased with how easy it is to work with! Getting better at mixing colors too. Thanks again for all your tips!

What was your crossover design?