[emilsoft]

Dear friend,

We are sorry that we may not consider adding or changing because it is not an easy work and may casue other problem.
But we will consider about that in our later product update.

Best regards

Thanks for considering it as a potential future firmware update

 

[ApaucalyptiK]

Thanks for considering it as a potential future firmware update

I think he meant a new product :/

 

[FiiO Willson]

Is the Q7 eq still limited to Bluetooth only? I don’t understand this limitation when qudelix 5k and BTR7 work fine on all inputs - it’s unfortunately limiting me from purchasing it as a replacement to my RME and Qudelix 5k as lot of the time I use optical/usb sources

I'm sorry that our previous Q7 did not support the USB side to support PEQ, but we are currently doing technical research in this area, and now it looks feasible.

We will be the first to support PEQ on the USB side in our new product Q15, and we will consider upgrading Q7 if it is technically feasible.

But I must say, these are not yet confirmed, but only technically evaluated, we think it is feasible.

 

[domiji]

Hello Q7 Lovers out there,

does anyone uses a ifi iPower power supply with the Q7?

Best
Dominik

 

[toomasg]

Hello Q7 Lovers out there,

does anyone uses a ifi iPower power supply with the Q7?

Best
Dominik

Using 12V/2A iPower X over here. My concern was effect on transients caused by aggressive noise filtering, yet so far I can not detect any negatives. Haven't heard with PL50 so can't compare. iPower is just more practical.

 

[FiiO]

The new XMOS firmware FW1.0.9 and Bluetooth firmware V1.1 for Q7 are now available!​

Q7 firmware download link: Click here

How to upgrade the XMOS firmware for Q7: Click here

How to update the Bluetooth firmware of Q7:Click here



Introduction of new added function:

1. The default idle time of automatic power-saving function is 30 minutes,and you could turn OFF it in the setting menu;

2. The direction of menu cursor for scrolling knob could be set via the knob control function;

3. The PEQ function is only supported in Bluetooth mode.



Since we will have 3 days off from April 30 (Sunday) to May 2 (Tuesday). If you have any questions after updating the firmware, you could try to download and flash the old firmware for the Q7 in the firmware download page. Or directly contact us by sending an email to support@fiio.com. We will reply to you as soon as possible right after the holiday.

 

[karloil]

The new XMOS firmware FW1.0.9 and Bluetooth firmware V1.1 for Q7 are now available!​

Q7 firmware download link: Click here

How to upgrade the XMOS firmware for Q7: Click here

How to update the Bluetooth firmware of Q7:Click here



Introduction of new added function:

1. The default idle time of automatic power-saving function is 30 minutes,and you could turn OFF it in the setting menu;

2. The direction of menu cursor for scrolling knob could be set via the knob control function;

3. The PEQ function is only supported in Bluetooth mode.



Since we will have 3 days off from April 30 (Sunday) to May 2 (Tuesday). If you have any questions after updating the firmware, you could try to download and flash the old firmware for the Q7 in the firmware download page. Or directly contact us by sending an email to support@fiio.com. We will reply to you as soon as possible right after the holiday.

hhhmmmm....am I the only one who can't download the XMOS file??? from - http://fiio-firmware.oss-us-west-1.aliyuncs.com/Q7/Q7 XMOS FW1.09.zip

Nothing happens using Chrome when I click on the link. And when I copy the address and use Edge - the download is incomplete.

EDIT: Tried Chrome Incognito - that did the trick

 

[Endymion Joshi Godrez]

Is the PEQ fixed band or can you choose frequency band you want? Also, how many bands do you get, and what is the maximum q value?

 

[gto88]

updated both, smoothly. Good jobs @FiiO

 

[WarrenS]

I am deliriously happy now that the screen rotates

 

[emilsoft]

Is remote control volume via the app available?

 

[tombrisbane]

Anyone had the volume control knob skipping / registering multiple inputs after the firmware update?

Edit: Downgraded back to 1.04 and the issue persists, seems like I may have a hardware fault

 

[tombrisbane]

Mine is certainly broken unfortunately, RMA’ing.

Here is what the volume knob does when moving backwards and forwards in the same spot:

 

[emilsoft]

Mine is certainly broken unfortunately, RMA’ing.

Here is what the volume knob does when moving backwards and forwards in the same spot:

That doesn’t look broken. If you move it rapidly like that back and forth (not a real use case) small intolerance is expected. My ify gryphon has the same - it’s the nature of the beast small volume control with resistors


* I can’t see so well in the vid are you moving the vol only in one direction? Looks like it’s going back and forth rapidly

 

[tombrisbane]

That doesn’t look broken. If you move it rapidly like that back and forth (not a real use case) small intolerance is expected. My ify gryphon has the same - it’s the nature of the beast small volume control with resistors


* I can’t see so well in the vid are you moving the vol only in one direction? Looks like it’s going back and forth rapidly

Moving it back and forwards, then it double jumps up two. Obviously not a real use case but when in menus it double jumps menu options etc. It wasn’t doing it before but if it’s expected and just some wear maybe I don’t send it back…?