![4961839.jpg](https://nwzimg.wezhan.net/contents/sitefiles3600/18000638/images/4961839.jpg)
Flagship material- gold, silver and copper braided in one cable——LC-RE Pro swappable plug headphone cable
The upgraded LC-RE Pro consists of three kinds of wires – Furukawa monocrystalline copper, gold-plated monocrystalline copper, and pure silver. All three kinds of wires go through ultra-high temperature continuous casting after secondary smelting to be of the highest quality. As a flagship-grade braided headphone cable, the LC-RE Pro settles a matter at one go.
The LC-RE Pro is always treated as a flagship earphone cable, which consists of 20 gold-plated + 20 pure silver + 20 monocrystalline copper wires. 4 strands in a total of 240 wires achieve better conductivity that presents rich musical details.
In addition, it features twist-lock interchange audio plugs, allowing you to freely switch between 3.5mm single-ended/2.5mm balanced/4.4mm balanced plugs depending on your source.
Specially designed for comfortable wearing experience
To provide a better user experience, we stick to making optimization in every detail. Both the LC-RD and LC-RE Pro are designed with expanded MMCX connectors for reliable connections, and the ergonomic angle makes for a more comfortable wearing experience. Meanwhile, we carefully selected medical-grade stainless steel 316L material for the audio plugs. We care more about comfortability and durability even though the processing is more difficult and the cost is increased. Every choice is for those who are in love with music.
*The LC-RD is available on our AliExpress Official Store. Click the link below to take it home right away.
https://www.aliexpress.com/item/32896656764.html
*The LC-RE Pro is available on our AliExpress Official Store. Click the link below to take it home right away.
https://www.aliexpress.com/item/4000971898372.html
*The LC-RE Pro is available on our AliExpress Official Store. Click the link below to take it home right away.
https://www.aliexpress.com/item/4000971898372.html
Last edited:
![]() |
![]() |
Stay updated on FiiO at their sponsor profile on Head-Fi.
![]() ![]() ![]() ![]() ![]() |
majo123
Headphoneus Supremus
- Joined
- Jan 1, 2016
- Posts
- 6,440
- Likes
- 12,084
Not a bad price either as similar diy parts on luna are 100 dollars
http://www.lunashops.com/goods.php?id=5927
http://www.lunashops.com/goods.php?id=5927
JerBullfrog
New Head-Fier
- Joined
- Jan 12, 2017
- Posts
- 27
- Likes
- 44
I just put in my order from Canada! I've been looking for a good swappable cable for quite a while and am really glad to find this!
MarkSubsonik
100+ Head-Fier
FiiO LC-RE is now available in our Aliexpress store! Get one!
>>>>>>> https://www.aliexpress.com/item/4000971898372.html
![]()
Any idea when it will be available in North America (Amazon etc) ? Thanks!
Hi,Any idea when it will be available in North America (Amazon etc) ? Thanks!
Affected by covid-19, we could not send goods to Amazon now. You could consider whether purchasing one from Aliexpress?
Best regards
![]() |
![]() |
Stay updated on FiiO at their sponsor profile on Head-Fi.
![]() ![]() ![]() ![]() ![]() |
MarkSubsonik
100+ Head-Fier
Hi,
Affected by covid-19, we could not send goods to Amazon now. You could consider whether purchasing one from Aliexpress?
Best regards
Understandable. Thanks for letting me know. Excited to get my hands on one!
onestep2
New Head-Fier
- Joined
- Aug 22, 2004
- Posts
- 15
- Likes
- 1
Would these work with my older Shure 846 iem,'s? Thanks for any help. Sorry for my lack of experience.
Last edited:
Hi,Would these work with my older Shure 846 iem,'s? Thanks for any help. Sorry for my lack of experience.
Yes, the MMCX version is compatible with the Shure 846.
Best regards
![]() |
![]() |
Stay updated on FiiO at their sponsor profile on Head-Fi.
![]() ![]() ![]() ![]() ![]() |
onestep2
New Head-Fier
- Joined
- Aug 22, 2004
- Posts
- 15
- Likes
- 1
Thank you for your answer; I appreciate it.Hi,
Yes, the MMCX version is compatible with the Shure 846.
Best regards
Ordered in 0.78mm
Only 5 left![Wink :wink: :wink:](https://cdn.head-fi.org/e/people/wink.svg)
Only 5 left
JerBullfrog
New Head-Fier
- Joined
- Jan 12, 2017
- Posts
- 27
- Likes
- 44
Do you know if the 0.78 terminals will fit the audeze lcd-i3 properly?
From THIS PAGE
"While the LCDi4 and iSINE's two-pin connectors aren't proprietary and many standard ones will work, we did throw in a small twist that's important to note:
You'll notice a groove on the connector of the cable (under the L and R on the iSINE cable), and a corresponding tab inside the headphone connector. This is to ensure correct polarity. When using any aftermarket connector/cable, it's important to make sure the connector fits within this tab so it doesn't damage the connector inside the headphones, as this would not be covered by warranty. The recommended dimensions for connectors without this groove is 2.5mm x 5mm, and the pins are .75mm in diameter, but .78mm will also work."
The connectors FiiO uses have the groove, so it'll be fine.
"While the LCDi4 and iSINE's two-pin connectors aren't proprietary and many standard ones will work, we did throw in a small twist that's important to note:
You'll notice a groove on the connector of the cable (under the L and R on the iSINE cable), and a corresponding tab inside the headphone connector. This is to ensure correct polarity. When using any aftermarket connector/cable, it's important to make sure the connector fits within this tab so it doesn't damage the connector inside the headphones, as this would not be covered by warranty. The recommended dimensions for connectors without this groove is 2.5mm x 5mm, and the pins are .75mm in diameter, but .78mm will also work."
The connectors FiiO uses have the groove, so it'll be fine.
Last edited:
JerBullfrog
New Head-Fier
- Joined
- Jan 12, 2017
- Posts
- 27
- Likes
- 44
From THIS PAGE
"While the LCDi4 and iSINE's two-pin connectors aren't proprietary and many standard ones will work, we did throw in a small twist that's important to note:
You'll notice a groove on the connector of the cable (under the L and R on the iSINE cable), and a corresponding tab inside the headphone connector. This is to ensure correct polarity. When using any aftermarket connector/cable, it's important to make sure the connector fits within this tab so it doesn't damage the connector inside the headphones, as this would not be covered by warranty. The recommended dimensions for connectors without this groove is 2.5mm x 5mm, and the pins are .75mm in diameter, but .78mm will also work."
The connectors FiiO uses have the groove, so it'll be fine.
Thanks so much!
Peter Ruby
100+ Head-Fier
Will the MMCX connectors fit the Sony IER-Z1R?
I know that some don’t, so before ordering I want to make sure.
I know that some don’t, so before ordering I want to make sure.