[CephDigital]

M11 vs BTR7, which would be recommended?
I know that the M11 is a DAP but I would like to get some opinions. Thanks.

If you like all your music in one place and need the extra power, get the M11. If you want to save some money and need UAC 1.0 support (I.e., using it with a PS5) get the BTR7.

 

[FiiO]

The new firmware V1.88 for FiiO BTR7 is now available!​

Updated at 2022-11-28
The following changes and improvements have been made to the FW1.88:
1. Changed wireless charging to not be controlled by the charging switch;
2. Fixed the issue where MQA would be displayed without headphones in UAC mode;
3. Fixed the issue where option errors may occur in the app after upgrade.
BTR7 firmware download: Click here
How to upgrade the BTR7: Click here

 

[Nick24JJ]

The new firmware V1.88 for FiiO BTR7 is now available!​

Updated at 2022-11-28
The following changes and improvements have been made to the FW1.88:
1. Changed wireless charging to not be controlled by the charging switch;
2. Fixed the issue where MQA would be displayed without headphones in UAC mode;
3. Fixed the issue where option errors may occur in the app after upgrade.
BTR7 firmware download: Click here
How to upgrade the BTR7: Click here

Thank you, @FiiO , I updated successfully, everything seems to work fine!

When can we expect a firmware update for the UTWS5 and are you still supporting your FiiO BTA30 Pro?

 

[FiiO]

Thank you, @FiiO , I updated successfully, everything seems to work fine!

When can we expect a firmware update for the UTWS5 and are you still supporting your FiiO BTA30 Pro?

Dear friend,

Sorry we could not promise about that currently. But we will try our best to check whether we could add the LDAC support for UTWS5 in later update.

Best regards

 

[Chibs]

The new firmware V1.88 for FiiO BTR7 is now available!​

Updated at 2022-11-28
The following changes and improvements have been made to the FW1.88:
1. Changed wireless charging to not be controlled by the charging switch;
2. Fixed the issue where MQA would be displayed without headphones in UAC mode;
3. Fixed the issue where option errors may occur in the app after upgrade.
BTR7 firmware download: Click here
How to upgrade the BTR7: Click here

@FiiO Were you able to fix the LDAC rebooting problem when the btr7 is used with BTA30 pro?

 

[Nick24JJ]

Dear friend,

Sorry we could not promise about that currently. But we will try our best to check whether we could add the LDAC support for UTWS5 in later update.

Best regards

Okay, thank you, what about any new firmware for the BTA30 Pro? Are you still supporting that device?

 

[stuck limo]

Why is my BTR7 showing different codecs on the screen that aren't being used by my phone? So far I've seen LDAC and AAC displayed but I'm not using those codecs. 6

 

[FiiO]

Okay, thank you, what about any new firmware for the BTA30 Pro? Are you still supporting that device?

@FiiO Were you able to fix the LDAC rebooting problem when the btr7 is used with BTA30 pro?

Dear friend,

Sorry no new about that yet. We will try to report to the engineer again about that.

Best regards

 

[FiiO]

Why is my BTR7 showing different codecs on the screen that aren't being used by my phone? So far I've seen LDAC and AAC displayed but I'm not using those codecs. 6

Dear friend,
Sorry do you mean LDAC and AAC code are displayed in the BTR7 at the same time? You could try to reset the BTR7 by clicking the power+volume - button at the same time. Then reconnect again for check?

Best regards

 

[stuck limo]

Dear friend,
Sorry do you mean LDAC and AAC code are displayed in the BTR7 at the same time? You could try to reset the BTR7 by clicking the power+volume - button at the same time. Then reconnect again for check?

Best regards

No, when I turn on the BTR7 it has displayed AAC and another time it displayed LDAC but I wasn't using either.

 

[ChrisOc]

No, when I turn on the BTR7 it has displayed AAC and another time it displayed LDAC but I wasn't using either.

Out of curiosity, have you selected all the codecs on the Fiio Control App, if not which have you selected?

 

[jsmiller58]

Why is my BTR7 showing different codecs on the screen that aren't being used by my phone? So far I've seen LDAC and AAC displayed but I'm not using those codecs. 6

What device(s) are you connected to? What codecs are your devices are using? In my case the device shows both AAC and LDAC but that’s because I am connected to both iOS and Android devices.

Can you post a picture?

 

[domq422]

@FiiO I’m having an issue with my BTR7 - I upgraded to the 1.88 firmware yesterday. To summarize - I was listening to music with 60% battery left, the BTR7 was plugged into my iPhone with the provided lighting to USB-C cable, charging switch turned on, after about 30 minutes it shut off randomly, and now it will not turn back while it isn’t plugged in. With charging turned off from the device, it states on the screen that charging is off, when I turn charging on, it states that it is ‘charged’ and it flashes different images on the screen. Charged graphic, followed by the FiiO logo, then back to charging, then charged. I cannot access the device through the app, it briefly shows up on the app, but I cannot go into the settings.

Any insight before I email FiiO support? Thank you.

 

[FiiO]

@FiiO I’m having an issue with my BTR7 - I upgraded to the 1.88 firmware yesterday. To summarize - I was listening to music with 60% battery left, the BTR7 was plugged into my iPhone with the provided lighting to USB-C cable, charging switch turned on, after about 30 minutes it shut off randomly, and now it will not turn back while it isn’t plugged in. With charging turned off from the device, it states on the screen that charging is off, when I turn charging on, it states that it is ‘charged’ and it flashes different images on the screen. Charged graphic, followed by the FiiO logo, then back to charging, then charged. I cannot access the device through the app, it briefly shows up on the app, but I cannot go into the settings.

Any insight before I email FiiO support? Thank you.

Dear friend,

Please turn off the charge switch in the BTR7 while connecting to the iOS device. The iOS devices have limitation of the current for connected device. So if you turn charge switch to on, the BTR7 may not work correctly.

Best regards

 

[FiiO]

No, when I turn on the BTR7 it has displayed AAC and another time it displayed LDAC but I wasn't using either.

Dear friend,

If you are convenient, please take a small video and send it to support@fiio.com. Which device are you connecting the BTR7 to? Thanks in advance!

Best regards