Dear friend,
Wire function: it is for settings of headphone with in-line remote function and it can be set to whether to be working or not.
Best regards
[FiiO BTR15/BTR5 2021/BTR5]Bluetooth DAC and Headphone Amplifier Discussion & Impressions Thread
- Thread starter FiiO
- Start date
Wire function: it is for settings of headphone with in-line remote function and it can be set to whether to be working or not.
Best regards
Dear friend,
Thanks for the interest.
We could not tell when the next batch will be in stock again. You could ask the local seller to update you when the product is available again.
Best regards
@FiiO why don't you also make a usb c dongle like Lotoo Paw S1? Battery-free, with balanced and unbalanced output, an equalizer with many presets and good driving power. And you put it at a similar price to the BTR5.
BTR5 however is fantastic, if Bluetooth already offers very good quality, connected directly to the smartphone and using the balanced output becomes quite incredible in relation to the price.
BTR5 however is fantastic, if Bluetooth already offers very good quality, connected directly to the smartphone and using the balanced output becomes quite incredible in relation to the price.
NikolasDi
New Head-Fier
Hello, I have been using the btr5 for almost a year now and have encountered a serious problem on playback through USB both with a linux pc and an android phone.
At times the next song in a list plays back significantly faster or slower.
This only happens when I use the btr5 connected through usb.
I found posts by few others claiming the same and it appears to be a problem when one song has one sample rate and then the next one another.
It does not seem to appear on all players.
On android it happens on UAPP but not on Newtron.
On Linux pc it happens with deadbeef player.
Does anyone know anything about this?
@FiiO?
At times the next song in a list plays back significantly faster or slower.
This only happens when I use the btr5 connected through usb.
I found posts by few others claiming the same and it appears to be a problem when one song has one sample rate and then the next one another.
It does not seem to appear on all players.
On android it happens on UAPP but not on Newtron.
On Linux pc it happens with deadbeef player.
Does anyone know anything about this?
@FiiO?
Last edited:
mattw30
New Head-Fier
- Joined
- Jun 17, 2015
- Posts
- 17
- Likes
- 13
Is there a problem with manufacture as no one has these for sale in the uk and have no idea if/ when these will be back in stock
Hi, Im having some issues with my BTR5, always used it wireless but now I tried it via usb C with my Xiaomi lite but it only plays at 48 khz even when Im playin 24bit/96kh albums. Is there any fix to this? Im using Fiio player.
PD Its working now but with Pi player. Its weird than the official Fiio player can't do this.
PD Its working now but with Pi player. Its weird than the official Fiio player can't do this.
Last edited:
I did, a few months ago. Will do it tonight again to see if it fixes the issue. Thank you!
Chris Kaoss
Headphoneus Supremus
You have to use USB Audio Player Pro or similar audio player to fully enjoy your music out of the usb.
Most other player apps are routing through the android music layer, which samples all down (or up) to 48kHz.
Never tried the Fiio player, though.
Yeah, it seems the problem was the player. It's fine now with an app called Pi Music player. Thanks for your reply!You have to use USB Audio Player Pro or similar audio player to fully enjoy your music out of the usb.
Most other player apps are routing through the android music layer, which samples all down (or up) to 48kHz.
Never tried the Fiio player, though.
Dear friend,
Please check whether the usb output option from setting of FiiO Music app is turned off? Please try to turn it on to check again.
Best regards
Dear friend,
Do you mean that the problem happen in the certain app? You could try to reset the BTR5 by holding the power button for 15s and check again?
Best regards
Hello guys,
I have been using BTR5 as my main audio setup for about 1 months and very happy with its performance. However, does anyone have connection problem after updating firmware to 2.0? My stable connection range has been reduced (only about 3 meters) and i experience cutout if i put the BTR5 in one of pants pocket and my smartphone in another one.
I have been using BTR5 as my main audio setup for about 1 months and very happy with its performance. However, does anyone have connection problem after updating firmware to 2.0? My stable connection range has been reduced (only about 3 meters) and i experience cutout if i put the BTR5 in one of pants pocket and my smartphone in another one.
Dear friend,
Please try to clear the pairing record by holding the volume+ & - button at the same time for about 5s. Then reconnect again for check?
Best regards
Hi, already posted this on the Fiio BTA30 thread but I'm going to post it here aswell because I think it's a Fiio Btr5 issue too.
I was using the BTA30 paired with my BTR5 with no problem, but tonight it just stopped working. It's connected and the white light on the BTA30 is on and the BTR5 shows it's connected and shows LDAC, but there is no sound. I don't think it's the BTA30 problem because it's working fine with other bluetooth headphones I have. Also the BTR5 it's working fine with my mobile so I guess they ran into a compabitity problem of some sort...too bad because I was using the BTA30 only with the BTR5. I hope theres a fix for this.
I was using the BTA30 paired with my BTR5 with no problem, but tonight it just stopped working. It's connected and the white light on the BTA30 is on and the BTR5 shows it's connected and shows LDAC, but there is no sound. I don't think it's the BTA30 problem because it's working fine with other bluetooth headphones I have. Also the BTR5 it's working fine with my mobile so I guess they ran into a compabitity problem of some sort...too bad because I was using the BTA30 only with the BTR5. I hope theres a fix for this.
