Eletech Cables Official Impressions & Discussions Thread
Aug 2, 2020 at 6:12 PM Post #662 of 5,625
the 3 triangles are a symbol from Odin ( the mythology god not the iem :D ) but looks like there is an bravado mk2 also coming
Yeah while my audio is on point my mythology and history are weak AF
 
Aug 2, 2020 at 8:49 PM Post #664 of 5,625
@mvvRAZ said TLDR: Warm and thicc, so I'd say Zeus. Phantom really doesnt need more of either. For my tastes at least, the Phantom needs Palladium.

Just gave it a go with the Phantom, hard to know what will suit this earphone as I've been surprised in the past. A good match IMO, the bass is physical and voluminous for sure. However, I feel the midrange is benefited by the added contrast, openness and definition.The top-end also appears more sparkly and open. I wouldn't say the entire presentation is warm and thick, mostly just the bass on the earphones I've tested with. Sure is satisfying though :)
 
Aug 3, 2020 at 10:19 AM Post #665 of 5,625
I am very much enjoying my Noble Sultan pair with Eletech Plato.

But I find that the Plato 2 pin connector is a bit loose compared to the Sultan stock cable, is there anything I can do to make it more snug and fit? Simple fix that I can do, maybe like bent the pin inwards or something like that?
 
Aug 3, 2020 at 10:51 AM Post #666 of 5,625
I am very much enjoying my Noble Sultan pair with Eletech Plato.

But I find that the Plato 2 pin connector is a bit loose compared to the Sultan stock cable, is there anything I can do to make it more snug and fit? Simple fix that I can do, maybe like bent the pin inwards or something like that?


Heyy buddy,

I've just replied your pm but i'll post it here as well for clarity :)

Thank you for your kind support of our brand and products and for taking the time to write in to us! We're psyched to hear that you're enjoying the Plato with the Sultan!

Meanwhile the 2 Pins are meant to be 0.78mm, however due to some errant pins in the market with cables pins being larger than 0.78 that caused your IEMs female sockets to be enlarged hence the 0.78mm pins on your iems will feel slightly loose. Which iem cable were you using prior or tested with?

I would not recommend to bending the pins as it would likely damage the pins.

-Eric
 
Last edited:
Eletech Cables Stay updated on Eletech Cables at their sponsor profile on Head-Fi.
 
https://www.facebook.com/eletechsg https://twitter.com/EletechJP https://instagram.com/eletechsg/ https://elementechnology.com/ eric@elementechnology.com
Aug 3, 2020 at 10:54 AM Post #667 of 5,625
I am very much enjoying my Noble Sultan pair with Eletech Plato.

But I find that the Plato 2 pin connector is a bit loose compared to the Sultan stock cable, is there anything I can do to make it more snug and fit? Simple fix that I can do, maybe like bent the pin inwards or something like that?
Noble sockets are infamous for being quite terrible. I haven’t owned a Noble IEM that hasn’t had faulty sockets of some kind - the worst part is that they refuse to service them under warranty once you’ve used any kind of aftermarket cable with them
 
Aug 3, 2020 at 2:04 PM Post #668 of 5,625
I exclusively use the stock cable with Sultan, its relatively new so I didn't use any aftermarket cable with Sultan until Plato arrived.

Generally the loose is not that bad, but compared to the stock cable, Plato 2 pins connector is definitely a bit loose.

Maybe I am just feel a little bit annoyed that I can't get snug fit with Plato like I can get with the stock cable, after feeling that Plato was a perfect match for Sultan according to my personal taste.
 
Aug 3, 2020 at 2:06 PM Post #669 of 5,625
I exclusively use the stock cable with Sultan, its relatively new so I didn't use any aftermarket cable with Sultan until Plato arrived.

Generally the loose is not that bad, but compared to the stock cable, Plato 2 pins connector is definitely a bit loose.

Maybe I am just feel a little bit annoyed that I can't get snug fit with Plato like I can get with the stock cable, after feeling that Plato was a perfect match for Sultan according to my personal taste.
The issue here is Noble’s sockets imo. I’ve tried over 10 Eletech cables on dozens of IEMs without a single one being off spec, while I haven’t tried a Noble IEM with up to spec sockets lol
 
Aug 4, 2020 at 12:45 AM Post #670 of 5,625
116876784_3182215921860375_7466264234981222485_n.jpg117160421_772530950217365_4000460529451114238_n.jpg

A certain fam of ours took Eletech out for a golfing trip :D
 
Eletech Cables Stay updated on Eletech Cables at their sponsor profile on Head-Fi.
 
https://www.facebook.com/eletechsg https://twitter.com/EletechJP https://instagram.com/eletechsg/ https://elementechnology.com/ eric@elementechnology.com
Aug 8, 2020 at 9:18 PM Post #671 of 5,625
Aug 9, 2020 at 3:57 AM Post #672 of 5,625
Yay... Looks like I will make myself a nice present for birthday on August 14th. :)
 
Aug 9, 2020 at 12:11 PM Post #673 of 5,625
That case looks very familiar... now, where did I see it before? :wink:

20200807_205909.jpg

What the photos fails to capture is the Black accents on the Wine Red colour. It boggles me but i've failed to capture that detail into actual photos as well! :D
 
Eletech Cables Stay updated on Eletech Cables at their sponsor profile on Head-Fi.
 
https://www.facebook.com/eletechsg https://twitter.com/EletechJP https://instagram.com/eletechsg/ https://elementechnology.com/ eric@elementechnology.com
Aug 10, 2020 at 9:21 PM Post #675 of 5,625
What the photos fails to capture is the Black accents on the Wine Red colour. It boggles me but i've failed to capture that detail into actual photos as well! :D

How about now, Eric? Still using my phone but at a different angle. And, btw, whatever is inside of this case, the best pair up with Legend X I heard out of all the cables I tested to date :wink:

1597108731273.png
 

Users who are viewing this thread

Back
Top