BTW, is the new sound signature applied only to PCM input, or both PCM and DSD?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
DENAFRIPS FPGA Firmware Update (12TH Anniv.)
- Thread starter alvin1118
- Start date
according to the instructions: Yes.can it be done in mac ?
I made an old Windows 10 notebook do the job, though.
Can i get back to original firmware for Terminator 2 ?
after the update the sound skip all the time when using I2s and clock out .
after the update the sound skip all the time when using I2s and clock out .
Check in the webpage where you downloaded the new firmware from and look for more than 1 firmware, maybe 1.0 or something like thatCan i get back to original firmware for Terminator 2 ?
after the update the sound skip all the time when using I2s and clock out .
This is what we got for the Pontus
ThxCheck in the webpage where you downloaded the new firmware from and look for more than 1 firmware, maybe 1.0 or something like that
This is what we got for the Pontus
DrCal
Head-Fier
- Joined
- Feb 4, 2009
- Posts
- 86
- Likes
- 87
Did you configure I2S after update? Update resets I2S pin configurationCan i get back to original firmware for Terminator 2 ?
after the update the sound skip all the time when using I2s and clock out .
reydelanada
New Head-Fier
Today I upgraded my Terminator + to latest firmware using an M2 macbook air. No problems at all. Smooth upgrade. Configured clock and i2s after to match again my Gaia DDC.
I spent like 2 hours of critical listening to well known tracks and I liked the change. Looks like it gained even more detail and "life". Hard to tell without an A/B test but quite happy.
Last edited:
Yes , i configure the I2S .Did you configure I2S after update? Update resets I2S pin configuration
after the update left and right was reverse, so i have to configure the I2S.
I have the same experience left & right dsd channel swap. After run thru 000 to 111, seem like dac 111 setting is correct but need swap dsd channel. DDC remain 000.Yes , i configure the I2S .
after the update left and right was reverse, so i have to configure the I2S.
Alvin, Please Help.
Already back to firmware 1.0 , still have the skips .
Already back to firmware 1.0 , still have the skips .
CAJames
500+ Head-Fier
Alvin, Please Help.
Already back to firmware 1.0 , still have the skips .
And you’ve tried all the different I2S pinouts?
Last edited:
YesAnd you’ve tried all the different I2S pinouts?
Now I brick the terminator 2
DrCal
Head-Fier
- Joined
- Feb 4, 2009
- Posts
- 86
- Likes
- 87
Have a problem with T+. Only USB input works now, I2S is dead. Tried various configurations and no luck
DrCal
Head-Fier
- Joined
- Feb 4, 2009
- Posts
- 86
- Likes
- 87
Now going back to 1.0 hope it restores I2S ….
Users who are viewing this thread
Total: 15 (members: 3, guests: 12)