Chord Mojo(1) DAC-amp ☆★►FAQ in 3rd post!◄★☆

Mar 1, 2018 at 1:16 AM Post #35,491 of 42,916
After a few weeks of use, my cck cable caused some breaks with the audio whenever I moved the lead, but I just exchanged it at the Apple store for a new one and it’s fine.


Grab a paper clip or needle and clean out the pocket lint from the female end of your lightning connector on your phone. I bet it’s loaded and not allowing a tight fit with adapters.
 
Last edited:
Mar 1, 2018 at 11:53 AM Post #35,492 of 42,916
Is there any plan to release a new version of the mojo within the next two years? I'm in the process of saving up for an upgrade and don't want to purchase the mojo only for the mojo 2 to be released soon after.
 
Mar 1, 2018 at 12:52 PM Post #35,493 of 42,916
Is there any plan to release a new version of the mojo within the next two years? I'm in the process of saving up for an upgrade and don't want to purchase the mojo only for the mojo 2 to be released soon after.


I remember reading somewhere recently that there are no plans for the near future. I think this makes sense since the poly is very recent.

Also, the price difference between the current Hugo (2) and mojo makes more sense currently. I would be surprised if they close that gap anytime soon.

On a side note, my mojo just arrived two hours ago. I took a risk and chose this over the much less expensive iFi BL dsd nano that I recently sampled. I loved the sound of the nano. The mojo is better.

I’ve made DAC changes in the past that made me start tapping my foot again. This one makes me literally dance. Do it.
 
Mar 1, 2018 at 1:10 PM Post #35,494 of 42,916
Is there any plan to release a new version of the mojo within the next two years? I'm in the process of saving up for an upgrade and don't want to purchase the mojo only for the mojo 2 to be released soon after.
All the indications are no.
The Mojo crams an enormous amount of processing into such a small case volume. If you wanted to roughly double the amount of processing to similar to the hugo 2, you would need a larger battery, plus more volume to allow the generated heat to escape, so ultimately the case would have to be larger.
Once you start increasing the case dimensions, you are well on the way to making the Mojo the same size as the Hugo 2, and at that point the Mojo2 would no longer fill the slot in the product line for a mobile dac.
Once the next generation of more efficient chips becomes available, at a cheap enough price for Chord to use, then presumably Rob could update the design, but every time that the Mojo 2 question gets asked, he states that it is not yet feasible to start designing an update.
There is also the question about what incentive do chord have, to change the form factor or design of the Mojo, and possibly make it incompatible with the Poly?
 
Mar 1, 2018 at 1:37 PM Post #35,497 of 42,916
Has anyone tried the bantam gold power amp with their mojo, to power speakers?
 
Mar 1, 2018 at 1:39 PM Post #35,498 of 42,916
Mar 1, 2018 at 5:55 PM Post #35,500 of 42,916
This interference I get with my mojo and iPhone is a real buzz kill. I shouldn't have to put my phone in airplane mode when I'm on the go. :triportsad:
I don’t really get any. Even before poly, I don’t remember that much. Try shutting down non essential apps. Is it apps that amplify the source make it more susceptible? Like using onkyo hf player rather than tidal for example....
 
Mar 1, 2018 at 6:27 PM Post #35,502 of 42,916
This interference I get with my mojo and iPhone is a real buzz kill. I shouldn't have to put my phone in airplane mode when I'm on the go. :triportsad:

Is your phone very close to the mojo? Like touching each other? If yes, have you tried separating them? Does the problem persist?

Does the interference happen all the time, or only in areas of poor signal phone reception, where the phone antenna has to struggle to get a signal?
 
Mar 1, 2018 at 6:34 PM Post #35,503 of 42,916
This interference I get with my mojo and iPhone is a real buzz kill. I shouldn't have to put my phone in airplane mode when I'm on the go. :triportsad:

Yeah, it sucks. Users have reported the same with the Oppo HA-2, ALO CDM, FiiO Q5, etc.... cellular network signals are very strong and difficult to avoid for some depending on the carrier, the distance to the cellular transmition tower and the signal strength. Personally I don’t have any issue unless I’m on 3G, for LTE I get no interference. YMWV.
 
Mar 1, 2018 at 6:34 PM Post #35,504 of 42,916
Is your phone very close to the mojo? Like touching each other? If yes, have you tried separating them? Does the problem persist?

Does the interference happen all the time, or only in areas of poor signal phone reception, where the phone antenna has to struggle to get a signal?
I use the USB kit and the rubber band to hold the two together. I ride the subway, so want it to be as portable as possible. if I move them away from each other, I get no interference...but then it's not exactly convenient.
 
Mar 1, 2018 at 6:39 PM Post #35,505 of 42,916
I use the USB kit and the rubber band to hold the two together. I ride the subway, so want it to be as portable as possible. if I move them away from each other, I get no interference...but then it's not exactly convenient.
And this is why poly is a nice add on - as you get your phone back - rather than being tethered.
Suppose that’s life, you can have any two of three qualities, but you can’t have them all together at the same time :-)
 

Users who are viewing this thread

Back
Top