Chord Mojo(1) DAC-amp ☆★►FAQ in 3rd post!◄★☆

[491326]

i'm planning to use the mojo with a phone, what rubber bands are meant for the grooves? what other types of bands do people use?

 

[Mython]

Post #3.........

 

[491326]

more news, my mojo keeps cutting out, sound just disappears completely until i turn it off then on again. not overheat, i'm keeping it quite cool

edit: seems fine now

 

[Mython]

more news, my mojo keeps cutting out, sound just disappears completely until i turn it off then on again. not overheat, i'm keeping it quite cool

Are you sure you have fully charged it?

 

[miketlse]

more news, my mojo keeps cutting out, sound just disappears completely until i turn it off then on again. not overheat, i'm keeping it quite cool

What colour is the battery ball? Flashing red possibly?

 

[491326]

Are you sure you have fully charged it?

What colour is the battery ball? Flashing red possibly?

led is blue, i've changed some settings and it hasnt cut out since

 

[daberti]

So, after the first quick look Shanling M3s could be a possible candidate. Yet: does it play wavpack AND FLAC 32bit files (I've a load of them for working reasons). Looks like NOT.

There is probably some relevant information in the faq in post #3 of this thread.

THX @Miketise: I must agree you wrote a masterpiece of an understatement

EDIT: just to be clear, I meant (MP+Mojo wise) if that was possible on M3s own side as I'm already doing that either with Neutron (iPhone) and with Jriver MC 23 and I need to play Wavpack (32bit) and Flac (32bit) for working reasons.

 

[daberti]

more news, my mojo keeps cutting out, sound just disappears completely until i turn it off then on again. not overheat, i'm keeping it quite cool

Mate, why not trying with JRiver Media Center? It is a fully functional trial and maybe easier road for you.

 

[491326]

Mate, why not trying with JRiver Media Center? It is a fully functional trial and maybe easier road for you.

can you switch from computer to computer?

 

[daberti]

can you switch from computer to computer?

EDIT:
If needed yes. And look at this .
Any way in post #3 there is lotta info about configuring JR MC as well.
Give it a try and let us now.

 

[turkayguner]

i'm planning to use the mojo with a phone, what rubber bands are meant for the grooves? what other types of bands do people use?

Don't do it unless you are ok with airplane mode.

 

[daberti]

+1 Airplane mode.
Then: have you read here about the problem experienced by some of us with CCK 2.0 ?
Purchase CCK 3.0 (the one with two slots, in layman terms).

 

[438555]

Some more mates added

!!! iOS 11.3 only and Mojo/Hugo at the ready, please !!!
Thanks

Please, everyone adding his/her combo results, please mention CCK's own -whichever version, 3.0 or 2.0- FW and HW version.
For mates experiencing issues only: may I ask you to provide all the possible info (GB, hw and model, NOT IMEI and S/N of course) ?​

MOJO works:

@zettelsm iPhone X,Apple CCK 3.0 (FW 1.05, HW 1.00), Roon
@daberti iPhone 6 Plus 128GB, CCK 3.0 (FW 1.05 HW 1.0)
@daberti iPhone 6 Plus 128GB, CCK 2.0 (firmware version 1.0.0, hardware version 1.0.0, model number A1440) (it needed a respring to be brought back to reasoning)
@Adu iPhone 6S (Model A1633) with Onkyo HF Player, CCK 2.0 (firmware version 1.0.0, hardware version 1.0.0, model number A1440)
@lwells iPhone 6 (CCK 3.0)
@turkayguner iPad mini 4, CCK 2.0 (firmware version 1.0.0, hardware version 1.0.0, model number A1440)
@ZappaMan iPhone 7, CCK 2.0 (firmware version 1.0.0, hardware version 1.0.0)
@Deftone iPhone 8+, CCK 3.0 (firmware version 1.0.5, hardware version 1.0.0)
@AndrewH13 iPhone 6s and iPad 2017, CCK 3.0 (firmware version 1.05, hardware version 1.0.0) (tested against Mojo AND Hugo1)


MOJO not recognized:

@DavidW iPhone 6S+ 128GB, CCK 2.0 (firmware version 1.0.0, hardware version 1.0.0, model number A1440)
@lwells iPhone 6 (CCK 2.0), Our mate said "Mojo NOT recognized. Perhaps it just failed at a conveniently confusing time. Cable looks fine."


Apparently Apple has broken legacy support (i.e. towards CCK 2.0, which is NOT OTF upgradable BTW). For what I see it's kinda random like pattern, up to now possibly hitting some but not all of the iPhone 6 and 6S+ devices. NOT 6+ 128GB (mine) and NOT 6S (Moderl A1633) about which @Adu reported a successful coupling.
To complete the pattern -sorry for that- I humbly think that the ones of us who had a success with CCK 3.0 -but did NOT have CCK 2.0 at hand- would get a hold of CCK 2.0 (from a friend etc.) and try this as well.

Up to now not a single failure has been detected with CCK 3.0.

Just adding in. iPhone SE, iOS 11.3 CCK 2.0 model A1440, FW 1.0.0 HW 1.0.0 (worked with 11.2.6, and still works after updating to 11.3).
I do have the CCK 3.0 but that stays at home and I use it to connect to my Schiit Eitr. That also worked before and after 11.3

 

[daberti]

Thanks Dana for your contribute.
Will add you later. On mobile right now.

Cheers
Dan

 

[daberti]

2018/04/11 23:45 UTC
@Dana Reed added: thanks for your feedback

!!! iOS 11.3 only and Mojo/Hugo at the ready, please !!!
Thanks

Please, everyone adding his/her combo results, please mention CCK's own -whichever version, 3.0 or 2.0- FW and HW version.
For mates experiencing issues only: may I ask you to provide all the possible info (GB, hw and model, NOT IMEI and S/N of course) ?​

MOJO works:

@zettelsm iPhone X,Apple CCK 3.0 (FW 1.05, HW 1.00), Roon
@daberti iPhone 6 Plus 128GB, CCK 3.0 (FW 1.05 HW 1.0)
@daberti iPhone 6 Plus 128GB, CCK 2.0 (firmware version 1.0.0, hardware version 1.0.0, model number A1440) (it needed a respring to be brought back to reasoning)
@Adu iPhone 6S (Model A1633) with Onkyo HF Player, CCK 2.0 (firmware version 1.0.0, hardware version 1.0.0, model number A1440)
@lwells iPhone 6 (CCK 3.0)
@turkayguner iPad mini 4, CCK 2.0 (firmware version 1.0.0, hardware version 1.0.0, model number A1440)
@ZappaMan iPhone 7, CCK 2.0 (firmware version 1.0.0, hardware version 1.0.0)
@Deftone iPhone 8+, CCK 3.0 (firmware version 1.0.5, hardware version 1.0.0)
@AndrewH13 iPhone 6s and iPad 2017, CCK 3.0 (firmware version 1.05, hardware version 1.0.0) (tested against Mojo AND Hugo1)
@Dana Reed iPhone SE, CCK 2.0 model A1440, FW 1.0.0 HW 1.0.0 (worked with 11.2.6, and still works after updating to 11.3). Our mate said "I do have the CCK 3.0 but that stays at home and I use it to connect to my Schiit Eitr. That also worked before and after 11.3"


MOJO not recognized:

@DavidW iPhone 6S+ 128GB, CCK 2.0 (firmware version 1.0.0, hardware version 1.0.0, model number A1440)
@lwells iPhone 6 (CCK 2.0), Our mate said "Mojo NOT recognized. Perhaps it just failed at a conveniently confusing time. Cable looks fine."


Apparently Apple has broken legacy support (i.e. towards CCK 2.0, which is NOT OTF upgradable BTW). For what I see it's kinda random like pattern, up to now possibly hitting some but not all of the iPhone 6 and 6S+ devices. NOT 6+ 128GB (mine) and NOT 6S (Model A1633) about which @Adu reported a successful coupling.
To complete the pattern -sorry for that- I humbly think that the ones of us who had a success with CCK 3.0 -but did NOT have CCK 2.0 at hand- would need get a hold of CCK 2.0 (from a friend etc.) and try this as well to help us all.

Up to now not a single failure has been detected with CCK 3.0