Audio Newbie Cable issues
post-9009942
Thread Starter
Post #1 of 2

wholyroly

New Head-Fier
Joined
Dec 30, 2012
Messages
2
Reaction score
0
Joined
Dec 30, 2012
Posts
2
Likes
0
Hi everyone, I am a solo musician but have now incorporated a band.  I recently bought IE PRO 18's and a Shure PSM 900 along with a Allen and Heath Mixwizard console...ear buds plugged into rx body pack -  wireless connection to tx'er -  tx'er plugged into mixing board.  Tx'er plugged into mixing board is where I am having problems. 
 
Here's my situtation: I bought the mixer because of it 6 aux outputs which are beneficial when each band member wants to plug in there wireless tx/rx for their own mix, but my PSM 900 interfaces through separate Left and Right XLR plugs and the output from the mixing board Aux is 1/4 inch TRS.  My question is:  Will I get sound in both ear monitors if I connect the Mixer to the PSM 900 tx'er using a 1/4 TRS to Male XLR connected to a female XLR to  a 2 Male XLR splitter?
 
     Share This Post       
post-9010880
Post #2 of 2

wholyroly

New Head-Fier
Joined
Dec 30, 2012
Messages
2
Reaction score
0
Joined
Dec 30, 2012
Posts
2
Likes
0
In the meanwhile I just changed the settings on the PSM 900 to Mono, now I get a mono signal in both ears...
 
     Share This Post       

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top