Syzygies
500+ Head-Fier
- Joined
- Nov 16, 2004
- Posts
- 589
- Likes
- 11
Very beautiful front panel layout. We want a parts list.
Originally Posted by Syzygies We want a parts list. |
Originally Posted by __redruM One nice thing about the hammond cases is that they can be cut shorter with metal saw. |
Originally Posted by __redruM The holes are not threaded at all... That's why the screw need such a coarse thread. So I've got my hammond C mint: |
Originally Posted by n_maher As far as I understand it it's not an extra circuit it's just the other half of the MINT board. He chose not to fasten them together, just to run them end-to-end. He'll have to tell you why he did it that way. |
Originally Posted by silmaauki I will soon finalize my CMoy in a tin of size 57x57x17mm. The 9V battery will fit in. As well as the Alps volume pot. |
Originally Posted by __redruM One nice thing about the hammond cases is that they can be cut shorter with metal saw. I took the Hammond C at 120mm length and fit an amp/battery in the first 95mm, then cut the case to 95mm. 80mm is just a little too tight. |
Originally Posted by n_maher The only alps pot worth using would be "blue velvet" which is a 25mm cube so it's not going to fit in your case. The smaller alps pots perform worse than the Pannasonics, don't take my word for that just do a search and you'll find much more weighty opinions. Nate |
Originally Posted by silmaauki Blue Velvet will not fit in there. I know. But I did not know that generally Alps smaller ones are rated worse than Panasonic. On the other hand I have it hard to get any Panasonic in my hands. Anyway, I can't see the trouble with not using stripboard or custom PCB to fit in the Hammond. Just my thoughts... EDIT: Using Blue Velvet in Cmoy? Wouldn't that be overkill? |