General Information
EPA-007 was designed with the intention that the plan will want to play in the grade of high-end speaker and headphone. Headphone is highly sensitive to the overwhelming power ratio compared to about 1000 times in the loudspeaker, volume can be obtained with sufficient power of about 1mW. Headphones for high sensitivity, the quality of the device will be reflected in sound sensitive in this way. Phase Tech as well as other products, ensuring the freshness of the music by discrete circuit configuration and device configuration in the minimum EPA-007. It is difficult headphone impedance is several orders of magnitude compared to a wide range of speakers and 16 ~ 500Ω, also obtain the optimal braking force which also headphone. Controller is mounted dump this place you can get natural head appointed by varying the braking force of the headphones, and more softness of the sound that matches the taste. ● Dual Monoanpu whole page by discrete composition of high-sensitivity headphones are sensitive to degradation by the passage of the device freshness. Whole page was made without the use of discrete configuration amplifier OP in order to avoid a decrease in freshness EPA-007, was examining the device. You can drive in the configuration of a balanced mono headphone cable, and dual independent power supplies are also Monoanpu, wiring of L / R has been completely separated. ● equipped with a dump controller gives the optimal braking force to the headphones you can set the optimal braking force to the headphones with a wide range of variation of the impedance controller dump that are installed in EPA-007 and 16 ~ 500Ω. For a long time by the sound image by adhesion of the head, including Pat, to drive with moderate braking force, a massive bass reproduction becomes possible, have been pin-point localization in the head will be eased moderately has the effect of stress can be reduced even listening. ● equipped with protection circuit to protect the headphones equipped with a cut-off protector prevents noise from being transmitted to the headphones pop at the time of on / off power to protect the headphones when the abnormal operation. ● non-resonant vibration-free chassis no interference by the all-aluminum housing of the high strength not subject to interference from the other in the front panel can be configured, chassis thickness of 2mm, the top cover is machined aluminum with a non-magnetic material realized. Was slit and sealed structure without using the surface to heat the chassis. ● Guidance of dual mono headphone cable for connecting the EPA-007 is a dual mono connection is possible if the four-wire headphones. Re like acoustic vibe gave the lineup a dual mono headphone connection cable for the EPA-007 from.
