ifi Hip-Dac 3

Introduction

This is the first time I have reviewed an ifi product. Although I own the ifi ZEN CAN which I bought some time ago, I had not tried a source from this brand. Established in 2012 and with a distribution centre in the USA, ifi has its own way out of the other brands from the east. Very faithful to the Burr-Brown chips, the brand has a classic touch in its sound that is already a trademark of the house. This time I have been able to enjoy on loan for a few weeks this small portable DAC/AMP in its third generation, called if hip dac 3. It is a battery-powered DAC/AMP with a shape reminiscent of a small flask adorned with a Titanium Shadow tone. It has an aluminium casing and virtually all of the brand's signature features: iEMatch technology, metal film capacitors, updated version of ifi's GMT circuitry, along with a new crystal oscillator, Burr-Brown DAC, 16-core XMOS chip, true balanced circuitry, custom iFi OV op-amp, switchable gain selector called PowerMatch, Xbass bass boost selector, MQA support, DSD up to 256 and PCM up to 384 kHz. There are two USB Type-C ports, one for data and one for charging, with LED indicator included, two audio outputs (SE 3.5mm and BAL 4.4mm) and a 2,200 mAh battery that offers up to 12 hours of playback. Let's take a closer look at what this new ifi product has to offer.



Specifications

• Input: USB-C
• Supported formats: DSD256 / PCM384kHz / Full MQA decoder.
• DAC: Burr Brown.
• Headphone outputs: BAL 4.4 mm, SE 3.5 mm.
• Output power (RMS): BAL 400mW @ 32Ω; 6.3V @ 600Ω.
• Output power (RMS): SE 280mW @ 32Ω; 3.2V @ 600Ω.
• SNR BAL: <109dB(A) @ 0dBFS.
• SNR SE: <103dB(A) @ 0dBFS.
• DNR BAL: <109dB(A).
• DNR SE: <103dB(A).
• THD + N BAL: <0.006X% (360mW/2.0V @ 600Ω).
• THD + N SE: <0.01% (100mW/1.27V @ 16Ω).
• Frequency response: 20Hz - 45kHz (-3dB).
• Power consumption: <2W standby, 4W max.
• Battery: 2,200 mAh lithium polymer.
• Battery life: up to 12 hours.
• Power system Charging via USB-C, compatible with BC V1.2 up to 1000mA charging current.
• Dimensions: 102x70x14mm (4.0" x 2.8" x 0.6").
• Net weight: 135g.

Packaging

The ifi hip dac 3 comes in a small white box, whose dimensions are 126x93x38mm. On the front side there is a real picture of the product. At the top is the brand logo, at the bottom is the model name and the description of the model. On the back side there is a description of the motivation of the product, the main features, a description of the content, the specifications and the certifications it complies with. After sliding off the box, the product is shown inside a white protective pouch, inside a cardboard base. Attached to the pouch is a sticker with a smiley headphone smiley thanking you for your choice. Underneath is a double-sided quick manual card and the rest of the accessories. In a nutshell:

• The ifi hip dac 3.
• Quick manual.
• USB-A to USB-C cable.
• USB-C to USB-C cable.
• Instruction manual.
• MQA card.
• 4 white rubber bases.
• Brand logo sticker.

A protective cover is missing, but is sold separately. The cables are short, clearly for portable use. There is a difference between the two cables, while the USB-C to USB-C cable has a textile coating that makes it look better, the USB-A to USB-C cable is more generic, black and plastic-coated.
The packaging is really compact, with just enough and minimal frills. Just adequate, but nice in its size.



Construction and Design

The hip dac 3 is a small, oval flask encased in aluminium alloy and painted in a shade called Titanium Shadow. The body is compact, the casing has a good thickness and the whole thing is relatively light at 135g. The top face has only the brand logo in the centre, in black ink. On the underside are all the informative legends and icons, including one that says something like "designed and built in the UK, made in China". There is also the iEMatch selector. On the front face, from left to right, is the Power Match gain selector, the Xbass bass selector, the potentiometer, the 4.4mm BAL headphone output and the 3.5mm SE output. The selectors have a white LED indicating their activation, while on both sides of the potentiometer there are two curved green LEDs indicating that the device is switched on. On the back, from left to right, is the USB Type-C data port, a sticker with a QR code, a sticker with the Hi-Res Audio logo, the USB Type-C charging port with an LED (red to indicate low battery and white while charging). Little else.
I don't like that the iEMach selector is underneath and its travel is a little short, while its movement is a little rough and unsteady. Otherwise the design is compact, feels quite robust, has LEDs indicating almost all options and the weight is low for its power.



Connectivity

The ifi hip dac 3 can be connected to an Android smartphone via the USB-C to USB-C cable. It can also be connected to an Apple smartphone via a Lightning to USB adapter (not included). It can be connected to any PC, tablet or device with a compatible USB output, but only via the data port. For use with Apple iOS and Android devices, battery powered use is recommended,
otherwise you may receive error messages from your device. For use with PC it is necessary to download drivers. It has ASIO drivers and you can update the firmware from here:

www.ifi-audio.com/download-hub/



Operativity

The ifi hip dac 3 is switched on by moving the potentiometer clockwise and after hearing the click. It is a powerful device and it is recommended to start listening from the lowest volume range. It has a gain selector, ifi calls it PowerMatch. It increases the gain by 10dB. It has a bass boost selector, which ifi calls Xbass. This is an analogue circuit designed to "recover" the lost bass response.
The LEDs on both sides of the potentiometer light up in different colours to give information about the format being played:

• Yellow: PCM 44.1/48kHz
• White: PCM 88,2/96/176,4/192/352,8/384kHz
• Cyan: DSD 64/128
• Red: DSD 256
• Green: MQA
• Blue: MQA Studio
• Magenta: Original Sample Rate* (*MQB)

The iEMatch is a selector that reduces the output level. It allows more sensitive headphones to be used with the high part of the potentiometer, whose results are more linear. It is also used for more precision with the volume. It can be activated for 3.5mm SE output, 4.4mm BAL output or deactivated.
The device has a dedicated USB Type-C port for data and a dedicated USB Type-C port for charging. Charging the battery can take up to 3 hours using a powerful USB charger. It is recommended to use the included USB-A to USB-C cable, a smart charger or a standard charger up to 6.3V.
The battery indicator LED is colour coded as follows:

• White* > 75%
• Green* > 25%
• Red* > 10%
• Red* > 10%
• Red (flashing) ≤ 10%

*The battery LED will flash when the battery is charging.



Measures

Let's see how iEMatch behaves. In my opinion, it is an attenuator. Ifi could use three gain modes and save this circuit. Although, it is possible that it affects something else. The unloaded output at low gain almost reaches 1V RMS per SE, with the iEMatch activated in the 3.5mm position the voltage stays at 0.23V, a very drastic drop. Given that the output impedance per SE that I have measured is 0.32Ω, is it possible that the iEMatch decreases this impedance even more? Measuring that value is difficult for me because the voltage is low and my measuring equipment is not very accurate in that range. But, it seems that lowering the output impedance even further would be possible in an accurate circuit and achieve much lower background noise. In the same way, it is possible to use the potentiometer in the higher range, where the outputs are also more even between channels.
You can activate the iEMatch with high gain, but you can't go to the maximum volume because you see a clear distortion. The system stays at about 0.44V RMS.
Something similar happens at the balanced output. At the low gain output it delivers 1.9V, with iEMatch activated at the 4.4mm position it reaches 0.46V. Activating the high gain is the same as for SE, you can't reach the maximum volume with iEMatch activated, staying at 0.57V RMS without visible distortion.
The output impedance of BAL at low gain is almost negligible, 0.1Ω.







No Load SE

For SE at low gain you don't reach 1V RMS. At high gain you get up to 3.1V RMS.



15 Ω SE

For SE at high gain you get 1.46V RMS, which means 140mW power and over 97mA. Very good.



33 Ω SE

For SE at high gain you get 2.55V RMS, giving you 200mW of power and more than 77mA. The specifications say that 280mW should be reached and for that you should reach 3V RMS, something I have not been able to corroborate, as above 2.6V RMS there is visible distortion in the audible range.



100 Ω SE

For SE at high gain you get 3.1V RMS, with the volume at maximum. 96MW and 31mA.



No Load BAL

Without BAL load at low gain it reaches 1.92V and at high gain 6.25V RMS.





15 Ω BAL

For BAL at high gain you get 1.54V RMS, which is 160mW and 100mA. Surprisingly powerful.



33 Ω BAL

For BAL at high gain you get 3.31V RMS, giving 330mW and 100mA as well. 400mW is specified, for that the voltage should be 3.58V RMS. It's not far off, but it doesn't reach that value over the whole frequency range without visible distortion.



100 Ω BAL

My surprise was that I could not reach the maximum volume with this impedance. It reaches 5.52V RMS and the power is 300mW. A bit disappointing considering that the current is only 55mA.



Frequency Response

The frequency response is flat between 5Hz and 40kHz, as it should be for a Hi-Res product. No difference is observed between channels at medium volume.
Activating the Xbass selector gives an increase in the lower range which is 12dB at 5Hz, 10dB at 20Hz, 8dB at 40Hz, 4dB at 100Hz, 2dB at 200Hz and the curve joins the original without Xbass beyond 1khz.



Sound

Audio brands usually have some kind of house sound. With ifi this is absolutely true. The ifi sound is often associated with a warm, organic, analogue sound. And a lot of that may be due to the technology it uses. Ifi is faithful to Burr Brown dacs, analogue amplification and the use of the best electronic components.
Although I have only tested the ZEN CAN amplifier and this hip dac 3, perhaps I should not generalise this premise to the rest of the devices. However, both the components used and the brand itself are looking for something in that direction. But when I tried the hip dac 3 I was surprised that this feeling was not so pronounced. I think this device has those certain nuances, but it also has a sound that tends towards a realistic, mature, descriptive and wide neutrality. I was surprised to find a wide and voluminous soundstage, superior to many dongles or similar devices I own, with more flesh, weight, body and size. At that point, I set about comparing the hip dac 3 with those small devices, looking for that juicy, physical, extended sound. In fact, I didn't find it and that's why I have admitted the first superior value of this music flask.
Starting with a more concrete description of the sound, in the low end, the hip dac 3 offers a very deep range, with a slight rubberiness associated with a sense of darkness that gives it that realistic, analogue feel. It has a bit more flesh and physicality compared to cooler dacs, which can sound more dry or sterile. The hip dac 3 is juicier in this respect, offering a rounder, fuller bottom end. I get the impression that the bass hit has more travel, offering a more discernible, rougher texture. Although it is also less compact, compared to Sabre dacs like the EarMen TR-Amp. In this way, I feel the bass is longer, subtly slower in its recovery, but also with that extra physical part, extension and texture, which makes it more exciting and fun, without losing its good technical capacity.
In the midrange I continue to get that sense of physicality and body, which enhances the sound and adds a sense of volume and space, without having to fiddle with the potentiometer to make up for it. In this way, male vocals feel full and very full, enriched by the warm character of the hip dac 3. On the other hand, the profile's orientation towards neutrality is demonstrated in the clarity of the midrange. Without feeling forced or exalted, the midranges are clean, transparent and separated, reproduced with ease, but in a very complete and descriptive way. This is how the instruments are described in a quite vivid, even lush analogue way, winning the emotional game against other more bland, cold and sterile dacs. My feeling is that the hip dac 3 offers a juicier, more organic and natural sound that makes it more enjoyable, at the same time more palpable, surrounding, even voluptuous and full of attractive musicality. Despite the above, the hip dac 3 doesn't lose detail, it just exposes itself on a slightly different plane. My sense is that the body and physicality of the bass remains at a closer point, while the micro detail remains explicit, albeit on a plane not quite as close as the TR-Amp represents it. Its visibility is about the same, but there is a subtly greater density surrounding it.
I find the ifi sound represented in the treble. The analogue aspect of the high notes means that they are represented in a softer way at their end point. While the TR-Amp is more vivid, sparkling and fine in the last flash, the hip dac 3 ends the treble in a subtly rounder way, which gives it that point of musical softness, which is appreciated after hours of intense listening. The result is an equally explicit, extended, transparent, clean and separated high end, but less sharp and penetrating. It's not that there is a drop in the energy level, it's not a nuanced treble, but that the energy is more controlled, more distributed and emitted with a little less drive and edge.
But if there is something that I liked and surprised me about this portable device, as I mentioned at the beginning of this section, it was the sensation of spaciousness and scene. Without being a monster in this aspect, the sensation of volume, occupied space and depth, made me compare it with several similar products, searching in those, the size of that scene to find out if it was superior. The truth is that it has not been easy to find a device at that price level. That is why I must conclude that the hip dac 3 is excellent in this respect. Thanks to the physical, powerful, energetic feel of the bass, coupled with its level of depth, rounder body and extension, the soundstage feels wide, voluminous and more three-dimensional. It doesn't quite have that enveloping, gaseous, head-over-heels sensation, as I think the analogue nature of the sound gives it a realistic spatial attachment, without becoming detached or volatile. However, this does not detract from the fact that it possesses a remarkable sense of height, openness, distance between notes and separation. In that more technical aspect, this ifi is able to discern the micro detail as other dacs more analytical, but without getting to expose it in a more preferential plane, but more realistic or perhaps, a little behind the voluptuousness of the bass or first midranges.



Conclusion

The ifi hip dac 3 is a very portable device that is powerful, musical, very versatile and highly equipped. Ifi didn't want to leave anything behind and has equipped this device with almost all the improvements of its big brothers: iEMatch, PowerMatch, Xbass, dual audio output BAL 4.4mm and SE 3.5mm, integrated 2,200 mAh lithium battery, analogue potentiometer, separate USB Type-C connections for data and charging, the best electronic components, Burr Brown dac, MQA, DSD 256 and PCM up to 384khz. All this in a small, slim flask with a Titanium Shadow aluminium body. Not to mention a very competitive price, the ifi hip dac 3 can be a very effective entry-level device for multiple scenarios, which will make it unnecessary to carry other more expensive, even more bulky dongles or desktop systems, given its power, sound quality, size, connectivity and all those features I've already mentioned. Does the rest of the competition have all that at this price? Answer for yourself.



Earphones and Sources Used During Analysis

• Hidizs MP145 Golden Titanium
• BQEYZ Wind.
• Letshuoer S15.
• Letshuoer Cadenza 4.
• NiceHCK Himalaya.
• Rose Martini.
• Simgot EA1000 Fermat.
• TinHiFi T5s.
• Rose Star City 5 Pro.
• Shozy P20.
• Hidizs AP80 PRO-X Red Copper LE
• Xiaomi Redmi Note 8 Pro

Purchase Link



You can read the full review in Spanish here

thaslaya's star rating system:
☆☆☆☆☆ - Best in class/buy it now
☆☆☆☆ - Highly recommended
☆☆☆ - Sound for thee, not for me
☆☆ - Can't see the appeal
☆ - Product is a failure

Disclaimer:
This product was provided to me by Ifi Audio in exchange for my impartial and honest review. I recieve no compensation and all thoughts and opinions are my own. A special thanks to Karina at Ifi for coordinating this unit for review.

Gear used:
● LG v30+
● Samsung Galaxy s22 Ultra
● Samsung dongle
● Various iems

Source:
Listening was done through Amazon Music HD or Ultra HD.

Introduction:
Ifi Audio produces some of the best rated and most popular DAC/amplifiers on the market today. They have many choices in both the portable and desktop categories. Today I will be reviewing one of Ifi's newest portable releases, the hip dac 3. Despite the name, it is actually the fourth iteration but it comes with some substantial differences that will be showcased below.

Design:
At first glance it may be hard to differentiate the variations in all of the hip dac models. They all boast a fantastic build quality and different colored finishes. The hip dac 3 sports a "titanium shadow" color that is a more neutral departure from the previous blue, orange, and gold options. I personally prefer the blue and orange colors of the first two as they are more fun but the newest colorway does look more expensive and classy. On the bottom of the unit you'll find two USB-C ports, one for charging and one for the source connection. Ditching the old USB-A input for a USB-C is one of the best upgrades of this newest version. I have owned both of the previous models and one of my biggest complaints was the awkward, cumbersome, and frequent disconnections with the USB-A cable. The volume wheel retains the same look and feel as previous models. It also functions as to power on the device. There are two indicator lights on either side of the wheel that change colors to denote the sample rate of the source. The overall build quality is outstanding with a premium finish that feels fantastic in hand.

Features:
The "Power Match" and "XBass" buttons are back and their functions are the same as before. There are small indicator lights to show when these options are enabled. The Power Match is essentially a toggle for low and high gain. The XBass function injects a healthy amount of bulk to the lower end. It works really great with iems that are light on bass but can make others sound a bit bloated. It will mostly depend on the tuning and the user's penchant for bass. The hip dac 3 now features Ifi's IEMatch technology in the form of a toggle switch on back of the unit. It ensures a noise free background and is very helpful for reducing any hiss from high sensitivity gear. Included with the unit are three different cables with USB, USB-C, and lightning connections. It's a small inclusion but it ensures that the hip dac 3 can be used with any device right out of the box. There are also 4 little rubber "feet" in the box that are a nice little bonus.

Power consumption:
The hip dac 3 can deliver up to 400mW@32 ohm for balanced output and 280mW@32 ohm for standard.The unit uses a lithium-polymer battery that's robust and definitely holds a nice charge. Ifi touts the battery lasting up to 12 hours depending on volume and enabled options. In my testing when using IEMatch, Power Match, and intermittent XBass, it easily offers 6+ hours of play time. The battery indicator light is the same as past models and changes color depending on the remaining charge. Also thanks to the separate USB-C inputs, the hip dac 3 can be used while being charged which is great for desktop use.

Sound impressions:
The hip dac 3 still uses the same Brown-Burr chipset as the other iterations. These Brown-Burr DACs are known for adding warmth to the frequency response. To my ears it's a very subtle but welcome inclusion. There also seems to be a small increase in the overall soundstage. The hip dac 3 will faithfully and accurately reproduce the stock tuning of your favorite gear (with a touch a warmth) and take everything to the next level when using the extra features. I also had the chance to test the unit while watching Dune and Top Gun: Maverick. The added bass rumble with XBass enabled is awesome!

Final thoughts:
Is the newest iteration of Ifi's excellent hip dac worth the $199 asking price? I'd say it's a resounding "yes!". It sports excellent options and features, packs plenty of power, and can move seemlessly from desktop to portable use. Now the harder question: is it worth upgrading to the 3 if you already own one of the previous models? That answer is more nuanced. Do you need the IEMatch feature for sensitive iems or headphones? Is the USB-A connection a deal breaker? (it was for me) Is the titanium shadow color calling to you? Only you can answer those questions. For myself I found that the newest iteration packs every feature I could want in a DAC/amp and also addresses problem areas found on previous models. The hip dac 3 sets a new high standard in the portable DAC/amp category and is another fantastic product in Ifi's stable.

IFI HIP DAC 3: INTOXICATING FLASK OF AUDIO

Introduction: -

Today at Aural Cafe we are reviewing the iFi Hip-DAC 3 portable DAC and Headphone Amplifier. But before that let us tell you a bit about iFi Audio. iFi Audio is a subsidiary of Abbingdon Music Research (AMR) which is one of the UK's largest manufacturers of high-end audio products such as AmpliFiers, Active Buffer/PreampliFiers, DACs, and USB filters. Founded in 2000, AMR is based in London, United Kingdom. It is a subsidiary of the Abbingdon Global Group.

iFi Audio is one of the most respected brands in the audiophile world with hi-fi products across different prices and product categories with one aim- to improve music enjoyment. Founded in 2012 iFi oversee the design, development, and manufacture of more than 50 products from their headquarters in Southport, UK. iFi products and their packaging are made from recyclable materials, including Aluminium, Paper and Recycled plastics. There are no hazardous toxins in their components, and they ensure that every product released meets environmental standards. iFi prides itself on being an eco-friendly company.

iFi Hip-DAC 3 is competitively priced at US$ 199 only.



Specifications: -

• Input: USB-C
• Formats Supported: DSD256 / PCM384kHz / Full MQA Decoder
• DAC Used: Burr Brown Multibit
• Headphone Outputs: 4.4mm Balanced, 3.5mm SE.
• Power Output: BAL 400mW @ 32Ω; 6.3V @600Ω / UnBAL 280mW @ 32Ω; 3.2V @600Ω
• SNR: BAL <109dB(A) @ 0dBFS / UnBAL <103dB(A) @ 0dBFS
• DNR: BAL <109dB(A) / UnBAL <103dB(A)
• THD + N: BAL <0.006X% (360mW/2.0V @600Ω) / UnBAL <0.01% (100mW/1.27V @16Ω)
• Frequency Response: 20Hz - 45kHz (±3dB)
• Power Consumption: <2W idle, 4W max
• Battery: Lithium-polymer 2,200mAh up to 12 hours
• Power System: Charging via USB-C, BC V1.2 compliant up to 1000mA charging current.
• Dimensions: 102x70x14 mm, 135g

Disclaimer: -

The iFi audio Hip-DAC 3 is a loaner unit that was sent to us directly by iFi Audio. This review reflects our unbiased opinion as always.

Packaging & Accessories: -

• iFi Hip-DAC 3
• 4 x Silicone feet
• USB-C to USB-A cable
• USB-C to USB-C cable
• USB-C to Lightning cable
• iFi sticker
• Documentation

Check out the full unboxing video here,






Build & Design: -

iFi audio Hip-DAC 3 is the third generation of the Hip-DAC series and features a Burr Brown DAC chipset, iFi’s familiar iEMatch, Power Match and XBass. iFi Hip-DAC 3 follows the same timeless flask size design language as its predecessors Hip-DAC 1, and 2. While the flask design remains the same, Hip-DAC 3 has been revamped inside out. The Hip-DAC 3 now comes in a robust and sleek aluminium case with a titanium shadow hue manifesting a piece of timeless art with a touch of modern sophistication. The top panel hosts a top-notch analogue volume knob along with the 3.5mm and 4.4mm Headphone jacks plus the Power Match and XBass buttons. iFi Hip DAC 3 uses the same Power Match switchable gain button to ensure the optimal power for the power-demanding headphones. On either side of the elegant volume knob are a pair of LEDs that change colour depending on the sample rate of the file currently being played. We at Aural Cafe especially just loved this simple and sleek idea.

Although Hip DAC 3 has been marketed to listen to hi-fi music on the go we believe that it's not worth taking this piece of art outside as there are lots of chances of damage and scratches. To listen to hi-fi music on the go iFi Audio fans can try iFi Go bar.

The back of the Hip-DAC 3 now comes with iFi audio legendary iEMatch features which reduce background noise while using sensitive IEMs like Campfire Andromeda and many others. The iFi Hip-DAC 3 now utilizes an advanced 16-core XMOS microcontroller which helps the Hip-DAC 3 for efficient audio data processing and supports up to PCM 384kHz, DSD128, DSD256 and full MQA decoding. The circuit has been upgraded with the addition of new metal film capacitors for better power supply and frequency response. The iFi Hip DAC 3 was also upgraded with GMT circuitry along with a new crystal oscillator to reduce the noise and thus provide a purer sound experience. The upgrades now include two USB-C ports one for data input and the other for charging thus keeping the signal part clean and noise-free and for simultaneous use and charging. The Hip-DAC 3’s comes with the same 2200mAh battery which typically provides 7 to 12 hours of playtime on a single charge, varying based on the volume level and the power demands of the connected headphones.

So, when it comes to design and packaging one thing is sure Hip DAC 3 is a fully loaded flask with lots of useful added features and thoughtful accessories at just US$ 199 which is just US$ 10 more in comparison to the price of which Hip DAC 2 was launched.




Sound Analysis: -

• Tonality: - When it comes to the sound quality, we at Aural Cafe give a lot of importance to the tonality of the source. After listening to Hip DAC 3 for numerous hours with different IEMs and Headphones we can confidently say that Hip DAC 3 follows an organic and analogue tonality which sounds natural and balanced across the frequencies. The Hip DAC 3 excels in showcasing the sinuous nuances of instruments and vocal timbres. While listening to “Save Your Tears” by the Weekend the vocals sound very natural without any noise. Listening to “Stairway to Heaven” by Led Zeppelin the Hip DAC 3 again showcases its excellent timbre.

• Lows: - The bass reproduction on Hip DAC 3 is clean and leaner without any muddiness. The bass quality will depend mostly on the IEMs or Headphones with whom the Hip DAC 3 is being paired. With the XBass button on there is a slight increase in the mid-bass body which becomes useful while listening to Hip hop and EDM music. While listening to “Da Da Dasse” from Udta Punjab the bass sounds more vibrant and fun with the XBass button on.

• Mids: - The Hip DAC 3 showcases above-average mids when it comes to DAC-Amps at a similar price range. The Hip-DAC 3 adeptly navigates the midrange, offering in a buttery smooth way without any sharpness. Surprisingly with the Power Match button on both the male and female vocals sound a tad bit more forward and natural with lots of soul while the rendering of the instruments such as flute and sitar is intensely felt while listening to “Indian Summer” by Anoushka Shankar.

• Highs: - The Hip DAC 3 showcases a solid treble expression and extension while maintaining a natural and analogue presentation. The treble on Hip DAC 3 is clean with any shouty-ness and sharpness. While listening to “Paayaliya” by Amit Trivedi the Hip DAC 3 showcases just the right treble energy.

• Soundstage & Imaging: - The soundstage and imaging are just average on Hip DAC 3. The stage width is better in comparison to depth, but it's still average in comparison to the competitions. The Hip DAC 3 just adds a bit of soundstage which primarily depends on the IEMs or Headphones you are using the Hip DAC 3 with. The instrument separation and imaging are just average at best which is clearly visible while listening to complex rock and metal genres of music.

• Synergy: - Since the Hip DAC 3 showcases a natural and soulful tonality it synergises really well with neutral IEMs and Headphones. The Hip DAC 3 excels when it comes to background noise, control, and clarity. With the legendary iEMatch feature on board, it can synergise with ultra-sensitive and multi-BA IEMs. It has no lack of power for the most demanding IEMs and many Headphones available in the market. It runs Audeze’s LCD-2 a well demanding full-size Planer Magnetic Headphone without losing its characteristics.

Conclusion: -

This is our first experience with iFi products at Aural Cafe and we are impressed with the well-thought-out design idea of Hip DAC 3. We believe that iFi audio Hip DAC 3 is a special product that will hold its ground strongly in its super competitive product category. It is not just a portable DAC-Amp but a high-quality piece of audio art that must be in every audiophile collection. The design is damn cool yet elegant with top-notch quality at such a price. If you listen to your music while at home and office through your laptops and want to elevate your experience then Hip DAC 3 would be the right choice as it excels in achieving pitch black background, control, and clarity across the frequency without breaking your bank balance. It also brings on board a decent amount of clean power to drive headphones. With iEMatch on board, it’s a must-have product if you have sensitive IEMs. While the Hip DAC 3 excels in achieving analogue timbre and clarity across the frequency, instrument separation and imaging are average to say at the very best.

Non-Affiliated Links: -
- https://www.amazon.com/iFi-hip-dac3-Headphone-Enhancement-PowerMatch/dp/B0CKFKNNJH
- https://www.moon-audio.com/hip-dac-3.html

TLDR version on YouTube: TDLR - iFi Audio Hip DAC

The iFi Audio Hip DAC 3 has been loaned to me by iFi Audio for me to test it out and share my thoughts in this review. As always, they have not made any requests or comments and my review aims to be as unbiased as humanly possible.

You can find the official page for the Hip DAC 3 here: https://ifi-audio.com/products/hip-dac-3/

The above is a non-affiliate link.



Intro…

Let me preface this review by saying that I am a fan of iFi in general, having tried out a lot of their stuff and liking the majority of it. That is not to say that I have liked all of their items, nor is it to say that they have all been without issues. In general, I like their house sound and a lot of their designs, but sometimes they come with other “issues” that make them not a great fit for me.

One of the items that would probably fit into the category of “nice sound but not for me” would be the Hip DAC, at least the 1 and 2. I have never reviewed them, nor have I spent a huge amount of time with them, in fact, the Hip DAC 1 I tried for like 2 minutes and the Hip DAC 2 for probably 5 or 6 songs at most. During those brief tests, I liked the form factor and I liked the typical iFi sound, what I didn’t like was the choice of a full sized USB connector (although I do understand the reason behind it) and the main issue, the background hiss with IEMs.

While I am sure that the Hip DAC 2 was (is) great for over ear headphones, I have never tried it, I don’t have much use for a small portable amp/DAC for over ears as I don’t usually wear them away from a desk set up. Therefore, left with only IEMs to use, I really didn’t want to put up with the hiss when there are other alternatives out there. This may be a little hypocritical as I use the Go Blu regularly which also has the background hiss, although I feel it is less present than on the Hip DAC 2 (and not really noticeable on the 3.5mm output which is what I usually use).

But anyway, why am I going on about a device that I never owned or reviewed?

Well, it may be that iFi have actually resolved these issues with the new Hip DAC 3, something that I was eager to find out.



Presentation…

Honestly, I have reviewed so many iFi products and said the same thing about their presentation that I just feel that, at this point, I am copy and pasting myself.

They are well packed in a no frills but elegant way, containing the necessary items to get listening, which in this case are the device, two cables (USB-C to USB-C and USB-C to Lightning) and the quick start guide. Oh, and we must not forget the iFi sticker

There really isn’t much more that needs saying but if you want more, just check out one of my previous iFi reviews



Build and aesthetics…

The Hip DAC 3 is identical in design and dimensions to the previous generation, measuring 102 x 70 x 14mm and weighing just 135 grams. Ok, that is 10 grams heavier than the Hip DAC 2 but it is still very compact and lightweight. To put it into perspective, I have a Google Pixel 7a phone, as it is one of the smaller options, and the Hip DAC 3 is around two thirds of the size and no thicker than the phone with the case on it.

With Hip in the name and a quick glance at the design, there is no need to say that it is meant to resemble a hip flask, although with its size, you wouldn’t be storing a lot of alcohol in it.

Where the original Hip DAC was blue, the 2 was orange, the 3 opts for a titanium coloured finish and I have to say that it looks very elegant. I have been carrying it around over the holiday period and people were guessing higher prices than it actually sells for just based on looks (admittedly those people are already used to me telling the crazy prices for headphone related gear, so they are going to guess high already). Still, it looks cool and certainly doesn't look cheap.

As far as build, it really hasn’t changed from the previous models, still maintaining the metal enclosure and buttons/knob, there have just been a couple of changes to the actual functions, which I am going to mention now.



Functionality…

The main functions of the Hip DAC 3 remain the same, that is to say, those that are on the front of the unit. On the left we have the power match button (which is iFi for gain), followed by the XBass button. In the center we get the nice volume knob which is grippy and easy to turn. Then on the right we get the 4.4mm balanced headphone output along with the 3.5mm unbalanced headphone output (well, it’s actually S-Balanced but that’s another conversation). The two slotted LEDs, one at each side of the volume know, are still present here also.

Moving around to the back of the device, here we have major change number 1. The full sized, recessed, USB male connector has been replaced with a USB-C socket. This is probably the happiest I have been to see a USB-C connector on a device! To be honest, I am not as bothered by micro-USB as many others (although I do prefer USB-C much more) but the full sized USB-A connector on a device this small was just something that I could not get behind. So here, I am extremely happy for the update.

Also on the back, we get the second USB-C port, which was already present on the Hip DAC 2, that is to charge the internal battery. I know that some people would prefer to be able to charge the device with the same cable that is being used for dat but personally I prefer them to be separate on portable battery devices, that way it is not always charging when left connected to my laptop etc.

Underneath the device we get change number 2. The addition of IEMatch, something that can go a long way to resolving the hiss issue that was present on the previous model. For those that don’t know what IEMatch is, in simple terms it attenuates the output of the amplifier, helping reduce background noise but also allowing the amplifier to be used in higher ranges of the volume knob. Why would you want to use the higher ranges of the knob, well, as iFi use analog volume controls, there is always some kind of imbalance at the lowest ranges, which can be an issue if you use extremely sensitive IEMs and don’t listen very loud. iFi have sold IEMatch separately for quite some time now but it is nice to see them including it on more and more devices.

So, as far as functionality, plug in the cable to the iFi Hip DAC 3 and your device, turn the knob to turn it on, adjust volume to taste and start listening.

As far as formats, the device accepts PCM and DXD up to 384kHz, and DSD64/128/256, along with full decoding of MQA if that is something you need.



Sound…

It would be very unfair for me to try and compare the Hip DAC 3 to the Hip DAC 2 in terms of sound because it has been a while since I heard the 2, I only listened to it for a short amount of time and I don’t have the same IEMs available. However, I do seem to think that the Hip DAC 3 is slightly less warm than I remember the other model being. This could be totally wrong, as I said, I can’t really compare, but that was the first impression I got.

Let’s be clear, I think this is noticeably an iFi sounding product, with that hint of warmth that I find to be present in almost all of their devices, but I feel that it is slightly more neutral than something like the Go Blu. In fact, I would say that it is very very similar in sound to the Gryphon, a device that I love and use regularly. I know that there have been modifications to the new model (although I don’t know what they are and haven’t really researched them) but I feel that the sound is still nice and relaxed but not quite as smoothed over as I sometimes feel the Go Blu is.

I have been using the Hip DAC 3 a lot over the holidays, with many kinds of IEMs and I have not had a complaint with any of them. Is is capable of 280mW (@32 Ohms) from the unbalanced output and 400mW (@32 Ohms) from the balanced output, so it will power most easy to drive over ears as well, but I really didn’t find myself reaching for them, I would just grab a set of IEMs and go and lounge around somewhere (being sick over the holidays also meant that I favoured lounging on a sofa more than sitting at a desk!).

Yet the biggest plus for me is the fact that the background noise has been reduced dramatically from what I remember on the previous generation. Again, I don’t have the same IEMs that I tested the 2 with, so it’s not really apples to apples, but with the ones I have been using, the only time I could hear hiss was when I had the volume level set way higher than I would ever listen to music to anyway. I am very happy that the IEMatch is there but, as with the Gryphon, I really didn’t find myself using it.

So to wrap up the sound section, I guess I could say that the Hip DAC 3 has the typical touch of iFi sound but without being overly warm, more towards the neutral side of things, making details and nuances very easily appreciated (with the right IEMs of course!).



Conclusion…

I usually have positive opinions about the iFi products that I get to try out but I do find some more exciting than others. The Go Blu was something I was very impressed with when it was released (I bought one), the Gryphon was another (I also bought one) and the Go Pod were one of the most impressive things I tried out last year (I haven’t bought one… yet!).

To say that the Hip DAC 3 is the third generation of a device that didn’t really draw my attention, I have to say that I have thoroughly enjoyed using it.

If you want a touch of the iFi sound, in a portable package, then I think that the Hip DAC 3 is a very good option. In fact, I would say that if you want the sound of the Gryphon but without all the bells and whistles, then this is also a very good candidate.

__
As always, this review can be found in Spanish both on my blog (www.achoreviews.com) and on YouTube (www.youtube.com/achoreviews)

Introduction:-

Hello Guys, today I will be reviewing the IFI Hip dac 3. I have always been excited about the ifi products in general, one of the big reason been is the x-bass button. I have always wondered why more companies don’t do something similar like this. It such an awesome feature to have in my opinion.

This was my first time testing a feature like this and it lived upto to my every expectation. Also this is my first time testing an ifi product, so lets find out more about it.

I have also shared a video version of the review at YouTube any support there in form of a view, A like or A subscribe is greatly appreciated. But if you so wish to read the written version you can read this.



You can buy the Ifi Hip Dac 3 here or look for the local retailer here (Unaffiliated Link) - https://ifi-audio.com/products/hip-dac-3/

Before I start I want to say a huge thanks to Ifi audio for sending me this review unit, but all the thoughts and opinions you are about to hear are my own.

As usual since this is not an iem review the format of the review will be a bit different


I will be as usual following my bullet style format for better readability for those who are dyslexic and in general find it hard to read long paragraphs. I follow this guide in general from the British Dyslexia Association.

---

Review:-



1. Well it looks awesome, it looks like a flask and every time I used it in front of anyone else they were curious about what this is. The device is built like a tank! Although the full metal body does make it a bit hard to use it without a case



2. It comes with the Xbass button which gives you a +10db of bass, the power match button which is basically a high and low gain switch, the Iematch switch which gives you a -12b of power for sensitive iems or rather increase the impedance from less than 1ohms to less than 4.5ohms. I highly suggest using this when using any iems as this give a lot of range for volume for iems.





3. It has 280mw from single ended and 400mw of power from balanced, if I am not wrong these are the same power figures as the gen 2. Would have been nice if they had see a tad bit more this time around



4. The single ended of the hip dac is something what ifi calls the s-balanced where they state that you get all the power of balanced without the drawbacks of balanced (Thanks to paul wasabii for the wording of this)



5. The hip dac 3 has 2200mah of battery which ifi states should last upto 12 hours. On my testing of the dac I used a moondrop chu 2 via 3.5mm at around 30% volume in low gain mode without xbass and with iematch on and I got around 13 hours.



6. The orange colour of the hip dac 2 was really funky and I liked it, but it also probably would make it stand out too much so this new muted colour does look nice while giving it classy look.



7. It supports MQA, upto DSD 256, upto PCM 32bit/348khz and Upto DXD 256



8. There is a minor channel imbalance at the beginning of the volume range but it quickly disappears, If I am not wrong this existed in previous models too. Its not at the volume range I would generally listen too thankfully. Also it exists for a very small range at the beginning.



9. On the backside exists 2 usb c ports and they have moved on from that usb a port. One port is for charging other for connecting it to phones, computers etc. Also in the box it comes with usb c to usb c and usb c to lightning and also an usb c to usb a so everyone is covered!


10. You can use the hip dac 3 and simultaneously charge it via the charge port. One of the reason the port is separated because so that it get continuously get clean power something akin to the Muse hifi m4



11. Now talking about the biggest negative point of the hip dac 3 the volume knob. The volume knob is very robust and it is also knurled! But my god is It easy to knock and increase the volume suddenly, the hip dac 3 is targeted at a portable audio community so when moving about if you have it stacked with your smartphone or dap inside your pocket or your bag one unfortunate knock could suddenly increase the volume and blow your ears out!!!



12. This was probably the biggest con I saw with the hip dac 3. I wish there was a volume guard or better yet more resistance to the volume knob. The incident with me didn’t happen once but quite a few times, so much so that I almost stopped using it on the go. I really hope ifi can fix this in the next iteration. Its not that ifi cant make a good knob, the ifi go blu whose review will be coming next has a great knob and has quite a bit of resistance albeit it has stepped volume knob but I would rather have that than this for safety.



13. Now talking about sound. The ifi hip dac uses the burr brown dac, which is famous for its warm characteristics. But in the hip dac 3 the same characteristic does exist but with a slight sprinkle uptop and also a wider soundstage. The treble does become a bit smoother and that edginess of treble which the simgot has goes away.



14. Now the sound difference isn't apparent when you use it for the first time, but with the right iem like the simgot ea1000 it does make an impact and flavours the sound in quite an interesting way. I tested my entire collection here, but the simgot ea1000 was really well synergized with this even on the stock setting.



15. Now talking about the reason as to why I always wanted to review an ifi product, the xbass button. Now what can I say, it is amazing as I expected. It gives you that +10db of bass and it is just so enjoyable, but you need an iem which can reproduce that much bass without breaking down on the other range. Again as usual the ea1000 was superbly paired here and the Passive radiator of it worked so well in tandem with the xbass. That thumb, rumble of the bass was hitting so hard when listening to waltz by sunny, crack crack crackle by classy or Bjork’s Hollow 16 bit remix. I couldn’t stop playing with this button, its just to much fun.




16. Now enough gushing about the xbass button lets be a bit practical here. One small thing I would like if the xbass button rather than giving a set amount of +10db of bass would be nice if there was a dial where in I can tune the bass to my liking like from +1db all the way to +10db of bass or if not that then atleast three steps of xbass like lets say +2db, +5db, +10db. Why I say this is because for some iems I would love that tad bit of bass and it could really help having something like this. While +10db of bass is amazing, it doesn’t good with all iems how the xbass works depends on the iem and the driver quality of the iems



17. The xbass also has a great advantage as a low volume listener. When listening at lower volumes I generally find the bass to be lacking but with the xbass on it helps so much! Really great feature I really hope they update the hip dac 4 with variable xbass.



18. The overall warm sound signature and smoother treble and a fantastic wide soundstage does also help in gaming a lot. When using it for FPS games it makes the experience even better and I love it.



19. Now I would also love if ifi added the xspace button which the bluetooth counterpart go blu has. It basically gives you an enhanced soundstage. I would really like to see that being added.



20. Another complaint or rather shall I say suggestion not only me but many other has. Is please add bluetooth to this! I have seen numerous complains on japanese audio twitter space and even on various comment section that most people would love to own the hip dac but it not having bluetooth does deter quite a few. Having bluetooth for a device like this would be so good!



21. I know I have suggested a lot of things which ifi shall add but to be honest if ifi ever does add that they would take an even great device to an even greater step and if that comes at a cost of price increase I think so it will be worth it. Although if I am not wrong that does put their higher priced ifi gryphon in a weird place. I personally like the whiskey flask design hip dac has, I would say this looks more hip (Pun intended)



22. I will leave a small graphic of what all the led indicators mean so that you can see it




23. To finish my review of the hip dac 3, well what can I say I love it. If I ever have the best devices to suggest to someone for buying hip dac 3 will be on top of that list. Ifi has done an excellent job with it, specially with the implementation of the xbass button. Its a fantastic device and with the right iem or headphone these do sound and work fantastically.

---

Thanks for stopping by and have a great day ahead! Bye!


If you have any questions please feel free to ask me and also if you have any issues regarding this format of review please do comment I will try to mend it. Also sorry to those who are used to reading long paragraphs of review in headfi. I hope my review was upto the mark, I appreciate any feedback.

Again a big thanks to Ifi Audio for making this review happen.

Have a great day ahead

***Hipdac 3 is the latest product in Ifi's Hipdac series. Available for $199. I purchased the device myself with the purpose of writing an independent review. I am writing this review after listening to it for about 100 hours.

Specs

--> Input: USB-C
--> Formats Supported: DSD 256 / 11.3MHz | PCM 384kHz | MQA Full Decoder
--> DAC: Bit-Perfect DSD & DXD DAC by Burr Brown
--> Outputs: BAL 4.4mm | S-BAL 3.5mm
--> Power Output
BAL: 400mW @ 32Ω | 6.3V @ 600Ω
S-BAL: 280mW @ 32Ω | 3.2V @ 600Ω
--> Output Impedance: ≤ 1Ω (BAL/S-BAL) | w/ iEMatch on: ≤ 4.5Ω
--> SNR + DNR: BAL < 109dBA @ 0dBFS | S-BAL <103dBA @ 0dBFS
--> THD+N
BAL: < 0.006% (360mW/2V @ 600Ω)
S-BAL: < 0.01% (100mW/1.27V @ 32Ω)
--> Frequency Response: 20Hz - 45kHz (-3dB)
--> Battery: Lithium-polymer 2200mAh approx. 8 hours
--> Power System: charge via USB-C | BC V1.2 compliant up to 1000mA charging current
--> Power Consumption: < 2W idle, 4W max
--> Dimensions: 4.0" x 2.8" x 0.6"
--> Net weight: 0.3 lbs (137g)



Foreword

Hipdac 3's sound puts many digital players to shame. There is not an incredible difference compared to the previous version. Still, it's very competitive against other devices.

Build

Box contents:
Hipdac 3
Type c to type a cable
Type c to type c cable
Type c to lightning cable
Sticker and stabilizer pad (4 pcs)
Instructions for use and a warranty card come with it.

It looks like a small flask. The metal surface feels like it will be scratched, I make sure that my pocket is empty when I put it in my pocket. Other than that, it feels quite high quality in the hand. the ports and switchs seem like they will not break easily. Hipdac 3 has 4.4 and 3.5 outputs on it. It has two type c outputs. It has a potentiometer for volume adjustment, this is also the on off button.

The cables that come out of the box are also of sufficient quality. Only the fabric covered ones (the yellow ones) are a bit stiff and hard to bend.



Hipdac 3 vs Hipdac 2

The first thing that stands out is the iEMatch feature with Hipdac 3. Next is the type c instead of type a in Hipdac 2. As an upgrade, Hipdac 3 uses metal film capacitors and a low phase noise crystal oscillator. Both devices have the same dac chip.

The result? Both have similar output power and the same sound profile (the Hipdac series almost no play with the source audio), while the Hipdac 3 has a slightly more refined sound, slightly better separation and imaging. There is no night and day difference, just a slight difference. Add iEMatch (which works very well) and you can decide if the upgrade is fair or not.



Usability

The way it's used reminds me of the Fiio Q1mk2. Of course the Hipdac 3 sounds much better.

I would like to categorize the use of this device in two categories: desktop and portable. From a desktop point of view, there is no problem. It can already drive many over-ear headphones. Portable, it's not easy to carry in a pocket, but it plays better than any dongle. Easy to carry in a coat pocket in winter. In summer it can be challenging when you're just wearing shorts and a T-shirt.

There are 3 main advantages over dongles. Sound, power and iEMatch. iEMatch is a technology that optimizes sound for sensitive earphones and especially for iEMs. This technology allows you to get the maximum out of both a hard-driving over-ear headphone and a sensitive iem with the same amp. All this makes the size of this device tolerable for "portable" use.

As for battery life, it's not bad, but honestly not enough. Roughly 8-9 hours in daily use tests. We usually see 10 hours of performance in this type of amp/dac. I think this is insufficient because the device cannot transmit and charge from a single port at the same time. There are two different ports for these. This is good for signal quality and good for desktop use (you can charge and transmit from two ports. But it is a disadvantage for portable use. Wouldn't it be nice if there was a technology/mode that could perform both functions from a single port when the battery is about to run out?

When we look at the other functions, you can think of the Power match button as H/L mode. XBass increases the lower frequencies very clearly and distinctly. I can say that I found it successful for hiphop and edm.



Sound

You will like what you read in this part.
We said that it adds almost nothing tonally to the sound. "Almost" because it has a touch of warmth, even if it's very little. This is very good, especially if you are using a current or flagship phone or if your computer has a high-end motherboard. Otherwise there are no downsides. Apart from that, you get a good resolution and an incredible imaging for the price band. The Hipdac 3 reproduces a very natural and realistic sound and does so without destroying the low frequencies as some devices do.
This $199 device has technical specifications that will crush many entry/mid-level devices. Detail reproduction is not extreme but very good, if you are listening to a high quality format you can easily get microdetails (this also depends on the headphones you are using). I think the output power is enough for everything except for some limited headphones and extremely difficult to drive
planars. Maybe it won't scream at 600ohm, but it's sure to be loud enough.



Epilogue

It's a device that does the best it can for its price in terms of sound. For desktop use, you might want to consider something bigger, but this is good enough. If you're going portable, it's not as easy as a dongle. If you have a good phone, I think it's a much cheaper and more reasonable option than buying a DAP (put your money on headphones).

My thanks to ifi for the review unit to test out. As always, my opinion is my own.

The ifi HIP-DAC V3 comes in the same style box same assortment of cables and basically a similar metal body with new titanium shadow coloring. Inside there are a lot of micro changes and upgrades. It still is built exceptionally well and has that ifi house sound I love so much via those great Burr-Brown, XMOS 16-Core chips and other quality components inside.

SPECIFICATIONS
Input: USB-C
Formats supported: DSD256, PCM 384kHz, MQA Decoder
DAC: Bit-Perfect DSD & DXD DAC by Burr Brown
Headphone Outputs

Balanced: 4.4mm
S-BAL: 3.5mm
Power Output
Balanced: 400mW @ 32Ω; 6.3V @ 600Ω
S-BAL: 280mW @ 32Ω; 3.2V @ 600Ω
Output Impedance
Balanced: ≤1Ω , With iEMatch engaged: ≤4.5Ω
S-BAL: ≤1Ω , With iEMatch engaged: ≤4.5Ω
SNR
Balanced: <109dB(A) @ 0dBFS
S-BAL: <103dB(A) @ 0dBFS
DNR
Balanced: <109dB(A)
S-BAL: <103dB(A)
THD + N
Balanced: <0.006X% (360mW/2.0V @ 600Ω)
S-BAL: <0.01% (100mW/1.27V @ 16Ω)


Frequency Response: 20Hz - 45kHz (-3dB)
Power Consumption: <2W idle, 4W max
Battery: Lithium-polymer 2200mAh approx. 8 hours
Power System: Charging via USB-C, BC V1.2 compliant up to 1000mA charging current
Dimensions: 102 x 70 x 14 mm (4.0" x 2.8" x 0.6")
Net weight: 135 g (0.30 lbs)

FEATURES
MQA (Master Quality Authenticated)
Hi-Res True Native® playback of all music formats from MP3 to DSD256, PCM384 and DXD384.
The Burr-Brown True Native® chipset means file formats remain unchanged or ‘bit-perfect’.
The XMOS 16-Core chip processes the audio data received via the USB digital input.
It is a superior method to the traditional single-ended circuit approach. Balanced circuits reduce noise and crosstalk.
XBass is an analogue headphone spatialiser.
iFi’s exclusive S-Balanced® circuit delivers maximum performance from single-ended and balanced headphones alike.


IN THE BOX
iFi hip-dac3
USB-C Male - USB-C Male Cable
USB-A Male - USB-C Male Cable
Warranty Card
User Manual
Quick Start Guide

Opening up the box for the Hip-Dac3 one finds simple accessories but pretty much all you will need. The cable is a better quality this year and of the same copper one found in the Gryphon. The Hip3 is lightweight and thin, easily taken anywhere. I love the satisfying click when turning on the unit. Buttons and switches are all in easy-to-use locations and features are well implemented.

Sound Impressions:
The Xbass feature noticeably increases the depth of the lower end, it does this tastefully and without muddying up the rest of the frequencies. Features like the power match and the new ie match greatly improve the quality of headphones and IEMs performance. Using the Hip3 there is way a noticeable difference between stock audio in both volume and quality, the Hip-DAC3 has extremely low noise and even my most sensitive all BA IEM had no hiss as with some external units. Clarity and details with a touch of that ifi warmth would be my sound impressions in a nutshell.
It has good dynamics and decent soundstage not overly wide but perhaps very natural sounding. Power-wise it may not be a Diablo2 but it certainly has enough for everyday use and even my planar IEM and headphones sounded very good on this little device.

Afterthoughts:
The ifi Hip-Dac3 is a budget friendly portable DAC/Amp with a bunch of useful features and excellent internals.
The constant evolution of the product line is always done to a tasteful degree. The inclusion of ie Match and dual USB-C as well as internal updates make this the best Hip-Dac yet, but I would have liked a little more power out of the S-balanced and 4.4mm, the sound while mostly unchanged is clearer and louder. If you don't have the Hip2 or really need the ie match feature, then defiantly get this one it's a gem for sure.