One of my two Chord Mojo's stop working in USB. It correctly turns on. There's something I can try myself? I already try another cable and another source.

Hello everybody, I have two different RCA cables that gives me slightly sonic differences in my setup. I use the Mojo 1 as fixed dac and is connected to my integrated amp. I use it most of all the time connected with a charger. There is something bad, that could influence the output quality...

Exactly thanks. It’s strange... it’s not an easy cable to find. Btw, still thinking if buy the Digi+ Pro or just living with the normal Pi 4+Flirc using the standard USB for my Mojo.

So I should get the HiFiBerry Digi+ Pro and it's own case from the same manufacturer, thanks. With the HiFiBerry Digi+ Pro I cannot use the standard Toslink (my Mojo is busy with the TV) but I need to use the Coaxial with the Mojo. Tell me if I'm wrong, I should use the connector that is near...

You won't be limited to "192kHz/24bit"? Could you describe me your complete setup, I mean also the case of the Pi that you used for the HifiBerry and the exact cable (I mean brand and model) that you are using from the Pi (do you have the Pi 4?) to the Mojo? Do you use toslink or coaxial? I...

why did you prefer this to normal usb that is already on-board?

I have a question for you who use Chord Mojo. I actually use the Mojo for everything: - Raspberry 4 Pi / RoPieee via USB (for headphones and for the 2ch hi-fi setup) - TV via optical cable out for films and videogames (for the 2ch hi-fi setup) So I don't have any "desktop" DAC right now, Mojo...

Then you use the Mojo optical-in?

Hi everybody, just got a Rasberry Pi 4 that I will use with Ropieee (Roon client) and Chord Mojo via USB. I wonder: I should use the USB 2.0 or USB 3.0? I think that Mojo is limited to 2.0 but also I think that in the past I read that is always better for audio 2.0 instead that 3.0. What do...

there is a particular source that you can advice that is roon compatible?

Hi, I'm actually using an iPhone 8 Plus as source for my Mojo (for the main 2ch and for the headphones). The results seem great but I want to use my iPhone when I'm listening music so am thinking to change source. I thought about some fanless computer or similar things, but I think that maybe...

So it will? I was just buying the right screwdriver as described above. What do you mean with “let alone always at a full state”? Could you explain me better?

Hi, I have a Mojo Always connected to a USB charger because I use the Mojo as a desktop DAC. So the battery is FULL. After 20-30 minutes of using the Mojo, I hear a whistle-hum sound from the Mojo (similar to the sound-whistle that I hear when the Mojo is in the last part of a charge). Some...

Hi everyone, I just ask with directly to Rob this question but I wonder what do you think about; I am wondering what is the best strategy to keep the Mojo battery healthy: A) using it only with battery and charge it everyday B) using it with the wall-charger so it won't use its battery when...

Sure, the micro changing means that in "line level mode" if you press the balls the volume increase or decrease are more precise. Many press 4 times the low volume ball to obtain the right voltage that should be perfect for more amps while the double purple (default), for many, are too much...

About the line level mode ok the volume is the only thing that matters (two purple balls) but you cannot have the "micro" changing in volume that you have in the real "line level mode". Not a big deal btw, I know. I cannot live with the Mojo Always connected because in the last 5 minutes of...

In this way you can't obtain the "line level mode", right? Also, in this way you won't ruin the battery soon?

I use it also for desktop and for headphones, until now I have no issues at all with batteries. I charge them after a couple of hours after the orange state.

Even if it's a slightly different issue, when I touch the chassis of the Mojo with the jack of the RCA cable that comes from my amplifier, and the amplifier is connected to the wall power (even if the amp is turned-off), the Mojo turn-on alone from the off state. Also, when the jack from the amp...

I have the Mojo and the AFO and to me it's my definitive gear. When I bought the Mojo (new) I spent no more than 450 euros, just look for some offers or buy used. The Mojo is very strong-built, I could trust to buy it used.

I think i will stick with iphone, mojo and roon for now then.

Please NO. I don't want another "support" to Tidal like my receiver, that really support Tidal, but through the (awful) app called HEOS. I wish in a "Tidal mode" that works like Roon... I mean a real END-POINT, to be more precise, you open your Tidal app on your smartphone or tablet, then push...

I only wish in a “Tidal mode” just like exists for Roon.

Very, very interesting reading. I use the Mojo+AEON with my iPhone/iPads but sometimes I wish tu avoid the dac to have a more fast listening session (especially because I use the Mojo also for the main speakers rig). Said so, could you tell me about the timbre/sound signature do you achieve...

I'm sure that I will wait until Tidal will "see" Poly as direct endpoint, just like it does with Roon. I know I can use other methods but I prefer that. They are both without any limiter, but, with the same volume scale level, the iPad will sound higher than the iPhone. It's not an issue at...