-
-
Triode User reacted to jarnopp's post in the thread The New Chord Quartet M Scaler Discussion Thread with
Like.
This is funny, and I know many of us have made our own cables based on Nick’s design. There is a strong DIY current in this hobby but... -
Triode User replied to the thread Watts Up...?.In a slightly different but similar vein, I preferred and found it to be more transparent to have Dave + Pass Labs XA30.8 power amp...
-
Triode User replied to the thread Hugo M Scaler by Chord Electronics - The Official Thread.In my experience you should expect a firmer and more detailed bass and the top end will be more subtle and finer.
-
No, the FPGA to element flip-flop path is irrelevant - so long as there are no setup and hold violations - as the OP from the flip flop...
-
Triode User replied to the thread CHORD ELECTRONICS DAVE.The problem with cheap ferrites bought on Amazon (or elsewhere) is that they generally come with no specification of frequency or...
-
-
Triode User replied to the thread CHORD ELECTRONICS DAVE.I sold an unmodded (but immaculate) Dave last week in UK for the equivalent of $6900 so from this side of the pond $6400 looks like a...
-
Triode User replied to the thread Hugo M Scaler by Chord Electronics - The Official Thread.As I’m sure you will know, I also have a Roon lifetime bought quite a few yers ago but I keep going back to LMS + Squeezelite with my...
-
Triode User replied to the thread Hugo M Scaler by Chord Electronics - The Official Thread.If one goes down the TT2 route i think one will be disappointed in the lesser transparency compared to the Dave. I decided to use an...
-
Triode User replied to the thread Hugo TT 2 by Chord Electronics - The Official Thread.Are you intending to drive these direct from the TT2? If they are the speakers I am thinking of then they are only 88dB sensitivity and...
-
Triode User replied to the thread Hugo M Scaler by Chord Electronics - The Official Thread.Compared to using BNC into the Mscaler from my streamer I found with toslink the bass and lower mids were smeared (thats the only way I...
-
Triode User reacted to Progisus's post in the thread Hugo M Scaler by Chord Electronics - The Official Thread with Like.
I was referring to optical only. I totally agree on the bnc and use wave storm as well. In my bnc journey I found Belden bnc’s to be of...
-
Triode User replied to the thread Hugo M Scaler by Chord Electronics - The Official Thread.We all hear what we hear and I have always struggled with Toslink. Last night I tried it again into the Mscaler and only lasted half a...
-
For the SMPS regulators within the DACs, I do actually run at 500kHz to 1MHz and above - there are benefits in doing this, as inductors...
-
Triode User replied to the thread Hugo M Scaler by Chord Electronics - The Official Thread.Indeed, and there are those of us who have abandoned Roon in favour of other better sounding apps . . . . In the end often it all...
-
Triode User reacted to musickid's post in the thread Hugo TT 2 by Chord Electronics - The Official Thread with Like.
Set up as of now. Mscaler and tt2 direct rca into omega super alnico high output monitors. Around 97 efficiency great for tt2 7W output...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
