-
-
randytsuch replied to the thread Amps that can drive the HiFiMan HE-6 planar headphones.My bad then. Its really 80 watts into 8 ohms. Didn't pay enough attention to my previous post. So it really is 12.8 watts into 50... -
randytsuch replied to the thread Amps that can drive the HiFiMan HE-6 planar headphones.I did a quick spreadsheet to calculate, but maybe I screwed up? Still, 6.4 W into the he6 is plenty. EDIT: I double checked, and...
-
randytsuch replied to the thread Amps that can drive the HiFiMan HE-6 planar headphones.I was curious about the X350.5. Spec sheets says it leaves class a at 80 w, much higher than normal for a class ab amp. 40w into 8 ohms...
-
randytsuch replied to the thread ANK EL84 Amp.Output transformers say they are 50 ohm output, which would make sense for headphones. Might not work well for 4 or 8 ohm tweeters...
-
randytsuch reacted to JoeTho's post in the thread Amps that can drive the HiFiMan HE-6 planar headphones with
Like.
-
randytsuch replied to the thread Amps that can drive the HiFiMan HE-6 planar headphones.I built a ACA a while ago, and use it for my HE6 SE's. Off the speaker taps. Sounds great to me. I do plan to upgrade, to a bigger...
-
randytsuch replied to the thread Amps that can drive the HiFiMan HE-6 planar headphones.Thanks, I'll look into the Babelfish J. Did look at other Zen Mod's designs. He is selling ludef kits, but not many out there so...
-
randytsuch replied to the thread Amps that can drive the HiFiMan HE-6 planar headphones.I'd build a J2, but you can't find any 2SK3497's to build it with. The CFA3 is an interesting idea, but I'm pretty set on a Pass class...
-
randytsuch reacted to paradoxper's post in the thread Amps that can drive the HiFiMan HE-6 planar headphones with Like.
I like this. Original Mjolnir is a forgotten gem. Build a J2 or F5. Another option I'd evaluate is the CFA3 headamp - 16W into 50 ohms...
-
randytsuch reacted to jerick70's post in the thread Amps that can drive the HiFiMan HE-6 planar headphones with Like.
I think you would do well with either amp. I built a Pass ACA amp and paired it with the Elekit TU-8500. It sounded fantastic with the...
-
randytsuch replied to the thread Amps that can drive the HiFiMan HE-6 planar headphones.I've been thinking about building an amp for my HE6SE's, a diy clone version of a Pass class A amp. Seems like the Aleph J2 is well...
-
randytsuch replied to the thread Massdrop x Eddie Current ZDT Jr. impressions thread.You need to remove the transformer covers, and put the shield directly around each transformer. I took some pics at the time, but have...
-
randytsuch replied to the thread Massdrop x Eddie Current ZDT Jr. impressions thread.I had a first batch drop unit with a small amount of hum that I sold. Before selling, I wrapped the transformers with magnetic...
-
randytsuch replied to the thread DIY tube/valve adapters.Quick look at the datasheets. 12SN7 uses .3A @ 12.6V for heaters 12AU7 uses .15A @ 12.6V for heaters. If circuit is designed for the...
-
randytsuch replied to the thread DIY tube/valve adapters.You really need to look at what specific tubes you want to swap. Its more than pinouts, there is heater voltage and current to worry...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
