-
-
DartGerion reacted to IvanDrago's post in the thread "Open Alpha" T50 3D printed headphone project from MrSpeakers with Like.Yes. I´ve used a little bit of putty as well so the ball joint can still wiggle :beyersmile:
-
DartGerion replied to the thread "Open Alpha" T50 3D printed headphone project from MrSpeakers.Got it. I think I have some of it, so I'll try to seal the plug today with the putty. Also should the ball joint space be sealed with...
-
DartGerion reacted to IvanDrago's post in the thread "Open Alpha" T50 3D printed headphone project from MrSpeakers with Like.Looks good to me. To seal the holes i´ve used some putty (Blu Tack, Patafix). Works great and can be removed easily.
-
DartGerion replied to the thread "Open Alpha" T50 3D printed headphone project from MrSpeakers.Looks a bit uneven, plus i don't think that this stencil is edited to fit the 3.5mm jack plug. also i still need to cover the ball joint...
-
DartGerion replied to the thread "Open Alpha" T50 3D printed headphone project from MrSpeakers.Hello again! I've finally gathered my courage to start the assembly process. Almost got a heart attack when desoldering the drivers (the...
-
DartGerion reacted to khbaur330162's post in the thread "Open Alpha" T50 3D printed headphone project from MrSpeakers with Like.I believe so.
-
DartGerion reacted to gimmeheadroom's post in the thread "Open Alpha" T50 3D printed headphone project from MrSpeakers with Like.That's right, we had a similar discussion in one of the hifiman threads. The factory cables use TRS. All the custom cables I bought from...
-
DartGerion replied to the thread "Open Alpha" T50 3D printed headphone project from MrSpeakers.I have a guy here, in Lithuania, that does custom cables. He's in rehab most of the times, but I think I can catch him on his good day...
-
DartGerion reacted to gimmeheadroom's post in the thread "Open Alpha" T50 3D printed headphone project from MrSpeakers with Like.You can use skyaudiocables ebay shop. If you don't see what you want, use the contact form. Reece has many fans on this forum...
-
DartGerion replied to the thread "Open Alpha" T50 3D printed headphone project from MrSpeakers.Ok, I think i got it. Correct me if I'm wrong: we're soldering 3.5mm female connectors for Left and Right cups to get TS connection (tip...
-
DartGerion reacted to IvanDrago's post in the thread "Open Alpha" T50 3D printed headphone project from MrSpeakers with Like.Cheap cable you will find on Aliexpress. Search for Hifiman or Sennheiser for example.
-
DartGerion reacted to khbaur330162's post in the thread "Open Alpha" T50 3D printed headphone project from MrSpeakers with Like.https://smile.amazon.com/Youkamoo-Compatible-HE-400i-Headphones-Replacement/dp/B08VRZWMW1/ref=sr_1_7_sspa?crid=2CG49EMK5KYYP&keywords=hea...
-
DartGerion replied to the thread "Open Alpha" T50 3D printed headphone project from MrSpeakers.My bad. Yes, you're right. Nevertheless, not a lot of dual 3.5mm ts stereo cables :D Maybe it's better to use 2.5mm sockets.
-
DartGerion reacted to IvanDrago's post in the thread "Open Alpha" T50 3D printed headphone project from MrSpeakers with Like.You don´t need dual stereo. 2 x mono = stereo :)
-
DartGerion replied to the thread "Open Alpha" T50 3D printed headphone project from MrSpeakers.Already have it, but yes, continuity test seems the most fail-safe solution. Also, what should be the best choice of connector: 2.5mm or...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…