B

BobbyKa

New Head-Fier From Germany
Joined
Last seen
Messages
14
Reaction score
2
Medals
0
Classifieds feedback

Latest activity Postings Classifieds listings Classifieds feedback Head Gear Reviews About

    • B
      BobbyKa reacted to swtnate's post in the thread Home-Made IEMs with Like Like.
      I remove the negative from the cylinder. However, keep it in the cylinder until you have pulled the impression from the mold. It will...
    • B
      BobbyKa replied to the thread Home-Made IEMs.
      do you cure with the mould still inside the transparent ring or do you remove the mould from the ring when it is solid?
    • B
      BobbyKa replied to the thread Home-Made IEMs.
      this is what i did, without removing the shell. didn't mention this.
    • B
      BobbyKa replied to the thread Home-Made IEMs.
      this makes sense. I will try.
    • B
      BobbyKa replied to the thread Home-Made IEMs.
      4. 2nd cure 5. remove shell from cure 6. 3rd cure inside glysol i know that many only fill glysol inside the shell, and don't dip the...
    • B
      BobbyKa replied to the thread Home-Made IEMs.
      I get several areas like that when first using a new negative mould (nice-fit agar). second time little to no problems. the mould had no...
      • 1000032409.jpg
    • B
      BobbyKa replied to the thread Home-Made IEMs.
      I think I know what the problem was. And yes, it had to do with the settings i did. I wrote that i did not change anything to make it...
      • 2.jpg
    • B
      BobbyKa replied to the thread Home-Made IEMs.
      Just tested again. i changed nothing, but now the results are ok. don't know why. but will try to find out.
    • B
      BobbyKa replied to the thread Home-Made IEMs.
      Thought so too. But as it happens with different Software ans different Laptops...
    • B
      BobbyKa replied to the thread Home-Made IEMs.
      Did a build with GV-32830. 3x2mm tubes, both about 16mm long. White damper 5mm in front of the tweeter, brown damper 7mm in front of the...
      • fr.png
    • B
      BobbyKa replied to the thread Home-Made IEMs.
      Tried it yesterday. The shell has 8x9mm od at the ear canal. so 2 tubes with 3mm od does fit, but it ain't easy. Hardest part for me was...
    • B
      BobbyKa replied to the thread Home-Made IEMs.
      Sorry, I am a total noob to this. Got an imm6 but didn't tried yet. Also need to decide which software to use (Windows on laptop or...
    • B
      BobbyKa replied to the thread Home-Made IEMs.
      At the moment, there are two things i am unsure with: 1. Most CIEM I see dont have ear wax filters at the end of the tube. I see that...
    • B
      BobbyKa reacted to stegeoc's post in the thread Home-Made IEMs with Like Like.
      Remember that if you use 2mm ID tubes, you can always slip some short pieces of that 1mm ID tubing into the canal and see if you like...
    • B
      BobbyKa reacted to Wgibson's post in the thread Home-Made IEMs with Like Like.
      Get as many kinds of tube as possible. If you are ordering frome some place with tubing, grab some. They all have different kink...
    Show older items
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Back
Top