Recent content by BobbyKa
-
B
Home-Made IEMs
do you cure with the mould still inside the transparent ring or do you remove the mould from the ring when it is solid?- BobbyKa
- Post #15,627
- Forum: DIY (Do-It-Yourself) Discussions
-
B
Home-Made IEMs
this is what i did, without removing the shell. didn't mention this.- BobbyKa
- Post #15,621
- Forum: DIY (Do-It-Yourself) Discussions
-
B
Home-Made IEMs
this makes sense. I will try.- BobbyKa
- Post #15,620
- Forum: DIY (Do-It-Yourself) Discussions
-
B
Home-Made IEMs
4. 2nd cure 5. remove shell from cure 6. 3rd cure inside glysol i know that many only fill glysol inside the shell, and don't dip the entire shell. But don't know how this should make this difference. maybe 2nd cure to short?- BobbyKa
- Post #15,617
- Forum: DIY (Do-It-Yourself) Discussions
-
B
Home-Made IEMs
I get several areas like that when first using a new negative mould (nice-fit agar). second time little to no problems. the mould had no wax particels inside. am i right that it has to do with the mould an about cleaning/drying it before i put the resin in? if yes, what should i use for...- BobbyKa
- Post #15,611
- Forum: DIY (Do-It-Yourself) Discussions
-
B
Home-Made IEMs
I think I know what the problem was. And yes, it had to do with the settings i did. I wrote that i did not change anything to make it work, but found out that this is not true. Each time i unplug the imm-6 from the Laptop (and i did this each time i change the inear or check the seal of the...- BobbyKa
- Post #14,720
- Forum: DIY (Do-It-Yourself) Discussions
-
B
Home-Made IEMs
Just tested again. i changed nothing, but now the results are ok. don't know why. but will try to find out.- BobbyKa
- Post #14,687
- Forum: DIY (Do-It-Yourself) Discussions
-
B
Home-Made IEMs
Thought so too. But as it happens with different Software ans different Laptops...- BobbyKa
- Post #14,686
- Forum: DIY (Do-It-Yourself) Discussions
-
B
Home-Made IEMs
Did a build with GV-32830. 3x2mm tubes, both about 16mm long. White damper 5mm in front of the tweeter, brown damper 7mm in front of the woofer. I left the Vents of the gv as they were. They got more lows then all the (universal) inears I tried so far. i think i like it to have mor low end, but...- BobbyKa
- Post #14,684
- Forum: DIY (Do-It-Yourself) Discussions
-
B
Home-Made IEMs
Tried it yesterday. The shell has 8x9mm od at the ear canal. so 2 tubes with 3mm od does fit, but it ain't easy. Hardest part for me was to get enough space to get the tubes pushed through at the first bend of the ear canal. Had to drill to get more space, but then the shell got too thin at one...- BobbyKa
- Post #14,671
- Forum: DIY (Do-It-Yourself) Discussions
-
B
Home-Made IEMs
Sorry, I am a total noob to this. Got an imm6 but didn't tried yet. Also need to decide which software to use (Windows on laptop or Android on mobile. How to meassure the coupling resonance?- BobbyKa
- Post #14,598
- Forum: DIY (Do-It-Yourself) Discussions
-
B
Home-Made IEMs
At the moment, there are two things i am unsure with: 1. Most CIEM I see dont have ear wax filters at the end of the tube. I see that the place there might often be to small for filters on all tubes. But how do you deal with it? i guess the dampers are too deep inside the tube to reach all the...- BobbyKa
- Post #14,557
- Forum: DIY (Do-It-Yourself) Discussions
-
B
Home-Made IEMs
Thank you for helping! So i will order 1 and 2mm ID tubes and try to use only the 2mm ones. hope to have enough space at the end of the shell Also I am going to order a Dayton iMM-6 for measuring. Didn't plan that before.- BobbyKa
- Post #14,551
- Forum: DIY (Do-It-Yourself) Discussions
-
B
Home-Made IEMs
Hello! I'm new here, new to ciem and about to make orders for all I need. I want to do the ciem for stage use for me and my bandmates (Rock. guitar, keys, drums, bass, vocals). Until now we use universal iem (Shure SE535). The goal is to make comfortable replacements that can sonically keep up...- BobbyKa
- Post #14,547
- Forum: DIY (Do-It-Yourself) Discussions