Search results for query: *
  • Users: CADCAM
  • Content: Threads
  • Order by date
  1. CADCAM

    Splitting RCA jack signal

    I have a DAC (Maverick Audio D2) that has two RCA outputs, one SS and the other tube. It works great because you can feed two different headphone amps from the same DAC. I have a situation where I want to split the RCA jack signal coming out of just the SS output of the D2 to feed two tube...
  2. CADCAM

    Douk Audio Little Bear P7 headphone amp

    I bought one of these on Amazon and it failed in a little less than a month. I love the look and the sound was actually very good as well. Douk Audio has told me the power board is the issue and needs to be redesigned but they keep blowing me off on if and when they will address it. Would anyone...
  3. CADCAM

    Douk Audio P7 amp

    Anyone have any information on this little unit? Looks really nice IMHO for the price. https://www.amazon.com/Nobsound-Headphone-Amplifier-Audio-Preamplifier/dp/B07Y2S31QY/ref=cm_cr_arp_d_product_top?ie=UTF8
  4. CADCAM

    Superlux HD672

    Just purchased these November 20th and they are quite good IMHO. First the pads... they are a silicone pad and have some positive attributes but are a bit strange feeling when you first put them on. My computer\headphone room is at the end of the house and kept pretty cool. When you put the...
  5. CADCAM

    Volume settings?

    Quick question from an old skool audiophile turned headphone enjoyer. I've been at this awhile now but never listened from my computer or phone, always a CD player spinning my discs and sending a signal to an external DAC then a dedicated hp amp. My question is I've started listening using my...
  6. CADCAM

    To upgrade or not...that is the question

    I have a system set up for headphones in my cellar, it consists of a Keces HA-171 headphone amp, Keces DA-131.1 external DAC an AudioControl old skool EQ and an old Oppo DV-980h HDCD as transport. Was just reading online the DAC came out in 2008 and found most of the equipment is around ten...
  7. CADCAM

    1000X or DT990?

    I have the Beyerdynamics DT880 Premium 600ohm, HiFiMan HE400i, AKG K612 & Superlux 668b right now for full size cans but want a new option. I had the Audio Technica ATH-AD900 in the past and loved them for vocals but ended up selling them off, also sold off the Senn HD600's. I am tossed up...
  8. CADCAM

    website running slow? shockwave issue?

    Anyone having slow downs on this site? I'm on an older Asus laptop U7300, 4 GB, dedicated graphics and 240 SSD. W7 64 bit. any suggestions? Blast connection from Comcast.
  9. CADCAM

    First closed back can

    Can someone with some real experience look at my sig\profile and suggest a closed back headphone for me. I would like a more analytical, neutral sound but do enjoy tight clean bass as well as clear highs. Out of all my present cans I would probably pick my HD600 as the one that gets the most...
  10. CADCAM

    5670w options

    Not sure where to post this question but I have a Maverick Audio D-2 DAC that takes a single 5670w tube and I would like to know what my options are. Are there any other names for this tube? I have some Voskhod tubes in my other amp and really like the sound. I believe this tube is also...
  11. CADCAM

    Private message is messed up lately

    So when I go to my messages they are old and not updated. Going to sent folder then back sometimes fixes this but only sometimes. I just replied to a message and sent it but it doesn't show up. Happens at home and work. What's up?
  12. CADCAM

    Filtering for sale forums by country item will ship to

    Seems like a great idea to me. Many times I see something that looks great and I would like to buy but sure enough the seller is in the EU or somewhere else and only ships to his own country (which I can completely understand). Any chance we could include a search option that would allow us to...
  13. CADCAM

    Maverick Audio D2 DAC

    Don't know if this is the place to ask this type question but... I purchased this DAC, it has optical, digital coax and BNC inputs. Can I run all three of my optical drives to it? All my drives have optical out as well as digital coax. I was going to purchase a BNC to RCA (75 ohm) cable for the...
  14. CADCAM

    Do I need a DAC?

    I listen to my headphones through 3 different sources, an Oppo DV-980H DVD player, Samsung BD-C6500 BluRay disc player and an Onkyo Integra CD player. I do not use my computer to listen to music, I listen to actual CD's. All my disc players have optical outs. Do I (should I) think about getting...
  15. CADCAM

    O2 with RCA jacks

    I purchased an O2 with rear RCA jacks several months ago, my problem is the jacks are spaced too close together. I have been in contact with John at JDS Labs to see if he could make an O2 with wider spacing so I can use all my RCA's. I'm getting confused trying to find if the spacing has been...
  16. CADCAM

    Little Dot MKV vs JDS Labs O2

    Anyone heard the LD MKV and O2? Impressions and opinions please... I have the JDS O2 now and really enjoy it but need an amp for another room. Would you suggest another O2 or a LD MKV? I have a LD MKIII and really like the amp also but am looking SS. Thanks for input.
  17. CADCAM

    Qualified advise only please

    OK I am looking for a SS amp and I think, hope, believe I’ve narrowed it down to 3 possibilities, the Asgard 2, Objective 2 or the Matrix M-Stage. I have Beyerdynamics DT880 600ohm, Sennheiser HD598 and Superlux 668’s. I do have a LD MKIII that I use with the Beyer’s now but would like to try...
  18. CADCAM

    Possible ear pad replacement for JVC HA-RX 700

    I like my 700's but not the ear pads, I found a seller on "Feebay" that sells replacement velour pads go_me05. The stock pads are 100mm x 57mm, his are 101mm x 47mm. I just got them in and they do fit, a little tight but they fit. The opening is 10mm smaller in diameter (that's about .390 in) I...
  19. CADCAM

    Earpad

    JVC HARX700   Has anyone found a replacement earpad for these? The earpad is approx. 4" x 2.25" or 100mm x 57mm. I would love a velour pad with these.
  20. CADCAM

    Second Amp

    I am the audiophile transitioning to headphones and have a Little Dot MKIII set up in my bedroom with a pair of Superlux 668's & also Sennheiser 598. I want another amp to set up in my living room so it isn't so much a second amp but another "main" listening area. I love the LD with both...
  21. CADCAM

    6N6P GOLD GRID TUBES

      Hello All, I purchased a LD MKIII that I am thoroughly enjoying it and wanted a pair of back-up power tubes as I read they can fail in a year or so. I ordered these off "FeeBay" http://www.ebay.com/itm/300898285877?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_5202wt_1164...
  22. CADCAM

    Narrowed down to 3...

    OK I admit it... I'm hooked on this headphone thing. It is now time to take the next step and get a quality headphone to see if the Superlux headphones I've been listening to for the last several months are as good as it seems. I've narrowed it down to the Sennheiser HD 600, Sennheiser HD598 and...
  23. CADCAM

    Audiophile transitioning to headphones

    First I'm confessing that I have never really gotten into headphones, to me headphones were mostly for the gym. Like car audio was for listening while driving and certainly not for critical listening, headphones were for listening when you really couldn't listen to your system but wanted to hear...
Back
Top