Recent content by SteveSound
-
My HE-300/EF3 Mod Project
Nice upgrades - you one upped me I hadn't thought about the jacks and wiring. FWIW I finished building/burning in a Millett MiniMAX. I'd say the MiniMAX bass has a little bit more punch, but the detail on the EF3 with Tung-sol tubes is better. I kept switching back and forth on a number...- SteveSound
- Post #16
- Forum: DIY (Do-It-Yourself) Discussions
-
My HE-300/EF3 Mod Project
Ha! Yours is squeezed in too. It's pretty tight in there, but it works. Did you hear a difference?- SteveSound
- Post #13
- Forum: DIY (Do-It-Yourself) Discussions
-
My HE-300/EF3 Mod Project
Great! Post the pics - I'm sure yours will look much better than mine.- SteveSound
- Post #10
- Forum: DIY (Do-It-Yourself) Discussions
-
My HE-300/EF3 Mod Project
Sorry I don't know about the SD600. However, a simple tube swap is cheap and easy. The Russian 6ZH1P-EV tubes sound great and are easy to get from Yen Audio on ebay.- SteveSound
- Post #7
- Forum: DIY (Do-It-Yourself) Discussions
-
= HiFiMAN HE-560 Impressions & Discussion Thread =
What about a minimum amp for driving the HE-560? I just finished building a Millett Minimax with a few boutique parts. Is this enough to get some enjoyment out of the 560's? I'll be upgrading the amp somewhere in the future. So this a temporary situation. (I love my DT880 600ohms...- SteveSound
- Post #3,509
- Forum: Headphones (full-size)
-
My HE-300/EF3 Mod Project
Hey iano, have you started yet? One thing I ran into was the PCB holes. They barely fit the larger leads. I had to carefully ream out any excess solder. It wasn't a problem just made the process slower - care is required.- SteveSound
- Post #4
- Forum: DIY (Do-It-Yourself) Discussions
-
DAC as next upgrade?
I'm building up my system part by part. Right now I have 3 amps (EF3, LittleDot MkIII, Millett Minimax) and 2 headphones (HE-300, DT-880) and one DAC (Schiit Modi). Is the Modi DAC now my performance limiter? Given the existing equipment, what difference should I expect to hear if I...- SteveSound
- Thread
- Replies: 2
- Forum: Introductions, Help and Recommendations
-
Good source for Panasonic EV-J or ALPS RK27?
TomB has them listed on his site: http://beezar.com/catalog/product_info.php?cPath=37&products_id=76- SteveSound
- Post #5
- Forum: DIY (Do-It-Yourself) Discussions
-
Passive Balance Control?
I found the calculations for DB drop (easier than I thought). Given R1 = 5k and R2 = 10K, there is only a 3db drop without load. However, with load it all changes and I really don't know what that might be. Before I hook up the Minimax with fixed resistors as a test, I'd like to double...- SteveSound
- Post #4
- Forum: DIY (Do-It-Yourself) Discussions
-
Passive Balance Control?
Thanks for the starting values nikongod! I'll pick up the parts and give it a go.- SteveSound
- Post #3
- Forum: DIY (Do-It-Yourself) Discussions
-
My HE-300/EF3 Mod Project
If any lurkers are interested in the EF3 mods .... My Tung-Sol NOS tubes came and I finished the comparison: Chinese 6j1 (OEM): This one is the weakest stage of the whole amp. If you get one, junk these tubes. Voshkod 6ZH1P-EV: These are a sweet addition. Definitely worth a try. You...- SteveSound
- Post #2
- Forum: DIY (Do-It-Yourself) Discussions
-
New and need help
Hi! Welcome from another nub. I'm on the hunt too and reading lots of great threads here. I don't want to over load you, but this might be helpful: http://theheadphonelist.com/headphone-list/ You can set your criteria and narrow it down to a manageable number of options.- SteveSound
- Post #3
- Forum: Introductions, Help and Recommendations
-
Passive Balance Control?
I need a universal pseudo-balance control to move between stacks. I say pseudo, because I don't need a full/classical sort of balance control. Just an adjustment on one side. Reason: I have hearing loss on the left side that varies from 3 to 10 db, depending on volume levels. I'd like to...- SteveSound
- Thread
- Replies: 3
- Forum: DIY (Do-It-Yourself) Discussions
-
I was about to upgrade to HD600, but now the HE-400 is $299. What do I do?
I need to find a meet in the SF Bay Area. You are right, I should sample before purchase. The HE-300's are barely comfortable enough. So, I take your warning seriously! I like the headband idea on the 560's, but should try those before purchase too. Also, I should compare them with...- SteveSound
- Post #52
- Forum: Introductions, Help and Recommendations
-
I was about to upgrade to HD600, but now the HE-400 is $299. What do I do?
The HE-560 was near the top of my covet list. Fortunately, they disappeared from the HifiMan and head-direct websites. Maybe it's sold out? Recalled? Dunno, but they are not there.- SteveSound
- Post #49
- Forum: Introductions, Help and Recommendations