You will need to find a suitably experienced/qualified tech or hobbyist in your local area. Are there any general or vintage audio forums in Norway where you can search for someone? You could always try audiokarma.org.

Absolutely! The restoration process would include an adjustment, heatsoak testing and monitoring period at the end of the resto. You’d only adjust the amp first if there was no intention of restoring the amp in the immediate future.

Correcto - she's 100% original internally. An initial service would be the first port of call for an amp of this age - checking/adjusting bias and DC offset and cleaning/lubricating switches and controls etc. If the budget allows, a proper restoration will yield the best sonic results and...

Nice one - they have an excellent reputation!

So, the Sansui AU Alpha 907MR was suffering from cracked side panels, as is often the case with late model Alphas that have copped a few bumps. The side panels are a type of MDF which are very smooth and have been finished with some kind of vacuum-formed plastic covering (as opposed to vinyl)...

Lovely - the AU-317 is an under-rated gem, and that slimline form factor can be a big plus. I run a restored 317 as part of my PC rig.

I'm luckily at the point where I've played around with numerous speakers and DACs at various price points, and have settled upon options which are not necessarily the most expensive components that I’ve ever owned, but are the best sounding to my ears. Same goes for interconnects and whatnot. I...

A challenger to the crown has arrived... enter the Sansui AU-Apha 907MR! Lots of bitumised rubber sound deadening and Teflon tape to be found everywhere, along with the usual array of Elna Silmic Alpha Gold capacitors, RIKEN resistors and the big 13kg Tamura transformer. 33kg of Sansui goodness...

Indeed, they are 33kg of Sansui's finest. The binding posts on the MRX are from WBT and are top-quality. The feet themselves weigh over 1kg in total. I'll post some internal pics once I receive the MR, although it looks identical inside to the XR that I have.

Ah, glad to hear that Dad set the 907MR up for you to hear! The MR is the model after the 907XR that I currently run at my place. It's a very very slight evolution over the XR - slightly more detail, a tad less warmth. I'll be collecting the MR this week for some listening over the Easter...

Yep, Dad has done a great job with those binding post conversion kits. Very clean and fully reversible if required - the way that all good mods should be!

No, that's a file photo. A 907MR is all boxed up at Dad's place and awaiting it's debut at Casa Del Mac very soon. :)

You'll need to perform some disassembly of the amp to clean the switches. I recommend DeOxIt D5 spray. Use sparingly, as it will flush out any damping grease and the like if you spray like a madman. The 707DR should be similar to this 907MR when you remove the front face:

First port of call - a proper internal cleaning of the loudness switch (and other switches at the same time). If this doesn't help, there is a fault in the preamp or power supply circuitry which supplies the preamp stage. The loudness contour is essentially an EQ circuit which is switched into...

Great speakers those - I once had a pair of gen 1 Axis LS-28 with a different Audax woofer and they were fantastic!