Those wima caps you can get at eBay or your diy speaker shop. At this shop they have polypropylene types

Like I surgested at the first page of this thread the electrolytes at the output stage are 100uF electrolytes is the signal path are bad, replace them with polypropylene 2,2uF, yes they are big but I asure you your dac will sound much better. Goodluck

       Hello all,   Changed my Opamps in a Chinese Da converter, i did not have read all topic pages and maybe this dac has been seen before. years back i already had a V4 opamp and was very please with the change. Now in this Dac i have put in the V5 in the current-Voltage stage right...

Yes the cover is a problem. But i think i make an other cover, witch is higher. The bursons realy make the dac better listing to Those bursons preform very well and far behind the standard opa2604 opamps. Far more detail getting out of this dac.   Yes this is the improved version...

Quote: Bit late reaction but better react then never comment   But... are they really worth their lofty price??? I was a little sceptical but ones inserted , they will not be replaced with those plastic opamps   More then over 10 times i feld realy into a shock, by the first...

I did get in the burson opamps, only thing is the casing those opamps are a lot bigger. Burson opamps wooow i was realy shocked about the difference i now hear. Loads of more air around the speakers lots of detail never heared came out of the opa2604 Depth is amazing dito weightness i now...

Bursons are not as small a normal plastic opamps, true   But it ain`t be difficult as long as you don`t mixup the pinning from 1-8 (4 each side)    

C3 and C4 caps. But, original values are 47 µF   Those are over over killed value for the maker of the v-dac to ensure you can drive the v-dac to all kinds of amps But a value of 2,2 uF MKP cap will be enough to get enough bass.     Why MKP i already explained it in the tread...

Bought the DA02 Have let it run 7 days after first hour of listning. I found the tube output nicest sound (less accurate 0.1 % distortion) On SS output hmmm typical opamp sounding oke more detail but less musical. Headphone is very poor quality, loads of white noise, i think a cheap...

still opamps are opamps and discrete sound much better What dac will have discrete outputs?    

1st edition The one spoken of here all 36 pages   Specifications   Frequency Response : 15Hz – 32KHz Sampling rates : 32bit 32KHz 44.1KHz 48KHz 192KHz (except USB) Dynamic Range : 129dB Digital Input Impedance : 75 ohm Output Impedance : Tube 22K Solid State 10K Output Voltage ...

New version is out   Eastern Electric MiniMax DAC Plus       another forum .....     the specifications.    1. Sabre ES9018 DAC chip 2. A Sync USB 32/192 3. Dual power transformers separate digital and analog 4. improved tube output stage 5. improved PSU 6...

Cable`s ...all devices needs there break in time, thats`s why rich people turn there stuff back to the store "it doesnt sound right" Stupid ones

All im saying is IF you use the cable with the adapter (bnc-rca) you still resieve those reflections. IF you use the cable without the adapters strait to the devices then you got a good connection almost without any reflections. So yes the devices need to have BNC to both ends, if you use...

Cable can be perfect i agree But not the adapter, it is a way to sell it, course a lot of users don`t solder out there connectors in the cases of there devices.   If you take the cable with both ends full BNC i think you got a good way to make it work. But with those adapters ... i wont...