-
-
Bjrmd replied to the thread New Shure RMCE-BT2 (tested with SE535).Mine will power off if there's no connection to the phone -
I had the same issue. To get it into DFU mode you have to turn the device on, connect it to your laptop and then hold three buttons at...
-
Bjrmd replied to the thread FEARLESS Audio IEM's Discussion/Impressions.Apparently the electrostatic drivers are very power hungry and were not tuned properly. I was very upset hearing the Roland initially...
-
So after a few more weeks with the new firmware version and going back and forth between the Bluetooth cable, wired, and a true-wireless...
-
Bjrmd replied to the thread FEARLESS Audio IEM's Discussion/Impressions.Here is my Neutron filter for the Roland. It's based on normalizing the output to match my se846 using minidsp ears for the...
-
-
Bjrmd replied to the thread Plussound Audio Thread.I agree completely. For a company claiming high end audio, this is a total failure.
-
I'd recommend anyone looking at PS Bluetooth module to stay far far away from it. Even with firmware update, hiss/white noise is still...
-
Bjrmd replied to the thread Plussound Audio Thread.I'm using a Fearless Roland. It has no background hiss with any of my Dacs including ibasso dc02, Apple and dragonfly red or Cobalt...
-
Bjrmd replied to the thread Plussound Audio Thread.A brief feedback on the new firmware for the Bluetooth dongle: Install process was fine on a Win 10 PC. Unfortunately, the background...
-
Any ETA on the firmware for the Bluetooth cable? Working from home, the white noise is much more prevalent and I'm back to wired.
-
Bjrmd replied to the thread Plussound Audio Thread.Exo Series Custom Bluetooth Cable (Copper (Type 6 Litz)) It has the new bluetooth module. The hiss is present with aptx or LDAC. Very...
-
Bjrmd replied to the thread Plussound Audio Thread.I have the new plussound BT dongle with the Roland. It won't change the sound except it introduces a fair amount of background hiss...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
