- Original Box & Packaging Included (Original Owner from Authorized Seller)
- Original Aluminum Storage Case Included (LIKE NEW).
- Always kept in the aluminum case when not in use!
- Balanced XLR 4-pin Neutrik Gold Connection with adapter to the original Neutrik 1/4" TRS plug.
- Original Beyerdynamic "Curly-Q" cable wrap.
- From a Smoke-Free & Pet-Free Household.
- Guaranteed to not be D.O.A. and to be in the Exact Condition Described & shown in the photos!
- See References below.

Black 4-pin male Neutrik Gold XLR Balanced Connection (using original 3m/10ft straight cable) with a Neutrik gold 1/4" TRS Adapter made from the OEM 1/4" plug. See additional information below.

EXCELLENT 9.5+/10 Condition, Barely Used! Original Owner & Purchased at Authorized Retailer.

I have decided to sell my hoard of headphones because I just don't use them anymore. They should go to someone who will enjoy these Audiophile Classics, which IMPO are still heaps better than the 2nd & 3rd Gen "revisions"! I am the Original owner.

ABSOLUTELY BEAUTIFUL Cosmetic & Working Condition all around, including the Ear Cups, Ear Pads, Headband, Cable, etc.

OEM SPECS:

Nominal Frequency Response: 5Hz-50kHz
Transducer Type: Dynamic (Tesla driver)
Style: Semi-Open Back, Circumaural (Over the Ear)
Impedance: 600 Ohm
Nominal SPL: 102dB Sensitivity
Power Handling: 300mW
Max SPL: 126dB
Weight: 12.2 oz. / 346 g without cable
Connection: Neutrik Gold 1/4" (6.35mm) TRS plug
OEM Cable: 3m/10ft straight, Sommer Cable SC-Peacock Mk II

===========================================

$544 Shipped

$373 Shipped Blowout Sale!!!

(CONUS Only)


- PayPal accepted (price includes PayPal fees). No "Gift Payments"!

- No Sales or Shipping Outside of U.S.A.

- Will be Double-Boxed and fully INSURED with a Signature Required for Delivery.

- Shipped within 1 Business day after receiving payment.

- A Tracking # will be provided as soon as the Shipping Label is created.


*** If you can't reach me via PM, please EMAIL me:

bbfoto AT hotmail DOT com


Complete PHOTO Gallery:

https://1drv.ms/u/s!AmW70ymwG0gjrjCUE2PSxo7BLMSr?e=D6w7TX


========================================================

Notes on the Balanced Cable Connection Mod (cable end termination, not at ear cup entry):

This mod was performed by me using high-quality silver solder and utilizing the original high-quality Sommer-Cable SC-Peacock Mk II headphone cable. This is an extremely high-quality cable that is used by the absolute best recording & mastering studios in Europe. There is absolutely No Reason to use any other cable.

I have been soldering and building custom audio and radio electronics since I was 12 years old...and I am old & gray now. This mod was done at a professional level.

This Balanced Cable Mod was done in order to take advantage of the Balanced Headphone Output of my OPPO HA-1 headphone DAC/Amp, which these T1 headphones sound absolutely incredible on! No other mods were performed.

The original 10ft (3m) headphone cable was cut approximately 6" (15cm) from the end of the original Neutrik gold 1/4" TRS connector.

Then a high-quality 4-pin male Neutrik Gold #NC4FXX-B connector was silver soldered to the cut end of the remaining 9'-6" straight headphone cable.

To create a high-quality adapter back to the original single-ended 1/4" Neutrik TRS plug, a matching female 4-pin Neutrik Gold XLR connector was silver soldered to the remaining ~6" pigtail that had the OEM 1/4" TRS Neutrik Gold plug left intact on the OEM cable. (See photos).

With this mod, these headphones can be used with either a Balanced (differential) 4-pin XLR headphone amplifier output, or the original 1/4" TRS single-ended plug. A standard 1/4" TRS to 3.5mm TRS single-ended adapter (not supplied) can be used for 3.5mm (1/8") TRS devices.

Only Neutrik's highest quality #NC4MXX-B & #NC4FXX-B 4-Pin XLR Connectors were used for this mod (Black XLR Shell with Gold contacts) to match the existing Neutrik gold-plated 1/4" (6.35mm) TRS plug.

When the Balanced XLR connection is used, the overall cable length is less than 6" shorter than the 10ft OEM straight cable. When the XLR-to-1/4" TRS adapter is used, the overall Length of the cable is within 1.5" of the original.

-----------------------------

I also have a set of GRADO SR125 open-back, on-ear headphones with Yellow Sennheiser pads plus a spare set of Original Grado pads for sale in EXCELLENT Condition. Please inquire if interested.

------------------------------

REFERENCES:

I have recently sold the following items here on Head-Fi:

Member "mooster1223"...

AKG K553 PRO Headphones

https://www.head-fi.org/classifieds...hone-excellent-condition.262/#hfc-comment-146


Member "ogidigo"...

Beyerdynamic DT-880 Premium 250 ohm Headphones

https://www.head-fi.org/threads/fs-...ersion-excellent-98-s-h.946999/#post-16225732


I've also sold a BNIB Hiby R6 Stainless Steel DAP to member, "chimney189".

And a Like New Audio-gd NFB Headphone DAC/Amp to member, "jodgey4".


PM or EMAIL with QUESTIONS.

THANKS FOR LOOKING!!!