Tuco1965
Headphoneus Supremus
- Joined
- Dec 28, 2012
- Posts
- 4,545
- Likes
- 192
I would still contact them and see what they have to say.
I would still contact them and see what they have to say.
I did, it isn't a big deal but it would be nice having a smooth volume control. Also what is the best way with removing tubes to swap them out? The ones that are on now are nearly impossible to get out, any sort of tutorial on how remove tubes?
I did, it isn't a big deal but it would be nice having a smooth volume control. Also what is the best way with removing tubes to swap them out? The ones that are on now are nearly impossible to get out, any sort of tutorial on how remove tubes?
They really aren't too hard to get out with methods described. I just use the foam packing from the tubes to grip the top and rock them out.
The answer is a definite NO for all cables. Typical plastic core cables are bandwidth limited to 5-6MHz which will only support 24/96 in stereo. To go to 192 you need in excess of 9MHz in bandwidth which is only available in glass or quartz fibre-based cables. Looking at the math without even allowing for headroom to adjust for speed one finds 24 x 8 x 2 x 192KHz = 9.2MHz.
Sorry if this has already been asked but---does Schiit sell refurb, used, or open box items?
They sell b-stock items through their amazon account. They often don't have much of b-stock and you might be better off looking at sales here.
Thank you! I always do check here, but it's often nice checking other places as well.
Do you happen to know if they include warranty?
Thank you! I always do check here, but it's often nice checking other places as well.
Do you happen to know if they include warranty?
The answer is a definite NO for all cables. Typical plastic core cables are bandwidth limited to 5-6MHz which will only support 24/96 in stereo. To go to 192 you need in excess of 9MHz in bandwidth which is only available in glass or quartz fibre-based cables. Looking at the math without even allowing for headroom to adjust for speed one finds 24 x 8 x 2 x 192KHz = 9.2MHz.
How do you get 24 x 8 x 2 x 192? 24 bit audio is exactly that, 24 bits. The minimum bitrate for stereo 24/192kHz audio is exactly 2 (channels) * 24 (bits per channel per sample) * 192000 (samples per second) = 9.216 million bits/second.
For those interested about S/PDIF, wikipedia explains the basics.
With regards to USB vs TOSLINK s/pdif, realistically USB 2.0 maxes out at about 30 MB/sec = 240 Mb/sec. Furthermore, USB can operate in asynchronous mode which allows it to use its own onboard high quality clock (i.e., jitter is irrelevant). On the other hand, TOSLINK maxes out at 120 Mb/sec and cannot operate purely from it's own clock. Also s/pdif may be limited to 20bit depth, depending on hardware. Theoretically, USB is definitely a superior interface in terms of data rate and function. TOSLINK permites galvanic isolation which may sometimes be important. In reality, none of these issues are going to matter when human ears are listening. Just choose whatever interface is most convenient for you.
But now you know... (and knowing is half the battle)
Cheers